Italiano dropdown-ico

Manuale per l’uso Graco 255963

32 pagine 3.43 mb
Scarica

Vai alla pagina of 32

Summary
  • Graco 255963 - page 1

    Instr uctions - P ar ts Doub le W all Hopper For use with XM ™ plural-component spray er s and immer sion heaters. For prof essional use only . 255963, Double W all Hopper 20 Gallon (75 liter ) Spra y Material Fluid Capacity 12 Gallon (45 liter) Heat ed Material Fluid Capacity See page 12 f or optional accesso ries and approv als. Important Safet ...

  • Graco 255963 - page 2

    Related Manua ls 2 312747L Contents Related M anuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Optional Accessorie s . . . . . . . . . . . . . . . . . . . . . . . 3 W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 K eep Compone nts A and B Sepa rate . . . . . . . . . 6 Changing M aterial s . . . . . . . . ...

  • Graco 255963 - page 3

    Optional Accessories 312747L 3 Optional Accessories See Accessorie s on page 28 f or par ts lists.  Not appro ved f or use in e xp losiv e atmosphers or hazardous location s Not all accessories and kits are app rov ed f or use in hazardous locations . Ref er to the specific accessory and kit manu als f or approv al de tails. P art Description Ap ...

  • Graco 255963 - page 4

    Warnings 4 312747L Wa r n i n g s The f ollowing w arnings are for t he setup , use, g rounding, maintenance , and repair of this equ ipment. The e xclama- tion point symbol alerts you to a gener al warning and the hazard symbol ref ers to procedure -specific risk. Ref er back to these wa r nings . Additional, product- specific warnings ma y be f o ...

  • Graco 255963 - page 5

    Warnings 312747L 5 W ARNING W ARNING W ARNING W ARNING PRESSURIZED EQUIPMENT HAZARD Fluid from the gun/dispense v alv e, leaks , or ruptured components can spla sh in the ey es or on skin an d cause serious injury . • F ollow Pressure Relief Procedure in this manual, whe n you stop spra ying and before cleaning, chec king, or ser vicing equipmen ...

  • Graco 255963 - page 6

    Warnings 6 312747L K eep Components A and B Separate Changing Materials • When changing m aterials, flush the equipment mul- tiple times to ensure it is th oroughly clean. • Chec k with your mate rial manuf acturer f or chemical compatibility . • Some materials use catalyst on the A side , b ut some applications ma y use catalyst on the B sid ...

  • Graco 255963 - page 7

    Component Identi fication 312747L 7 Component Identification Double W all Hoppers Mounted on Side of Frame Key: AF r a m e BX t r e m e ® low er (behi nd the fr ame) CN X T ™ air motor (behind the frame) D Double wall hopper E Universal hopper mounting kit F Fluid inlet assembly G Retur n tube H F eed pump J Agitator K Desiccant dr yer L Immersi ...

  • Graco 255963 - page 8

    Overview 8 312747L Overview Double wall hopper s (D) can be mounted on the bac k or side of the frame ( A) to gra vity f eed spr a y material to the Xtreme lo wer (B). F e ed pumps (H) and agita tors (J) can be mounted on to p of the hoppers to pre ssure f eed spra y mater ial directly to the pump. A strainer inside th e hopper (D) pre vents object ...

  • Graco 255963 - page 9

    Installation 312747L 9 Installation Hopper mounting kit 256259 allows the ho ppers (D) to mount on the sid es or back of t he frame (A). 1. Mount hoppers (D) on sides of the frame ( A). See F IG . 3. a. Attach ma in brack et (101) to f rame (A) with screw s (107). b . Repeat f or second hoppe r (D) on opposite side of frame (A) . 2. Mount hoppers ( ...

  • Graco 255963 - page 10

    Installation 10 312747L c. Attach the cor ner brac ket (103) to frame (A) with screw s (108) and washe rs (110). d. Attach lower mo unt brack et (104) to frame (A) with screws (108) and washers (110) . e. Attach main br ack et (101 ) to frame (A) with screws (107). f . Repeat steps b and c fo r second hopper (D). 3. Connect reducing s wivel (211) t ...

  • Graco 255963 - page 11

    Installation 312747L 11 7. Align holes on main br ack et (101) and thr ead inser ts of the hopper (D). Loosely f aste n hopper (D) to brac k et (101) with f our scre ws (107) and washers (110). 8. Conne ct s wivel fitting (202) to nipple (201 ). 9. Tighten union (208) and ensure fluid outlet assem- bly is aligned. See F IG . 7 on page 10. 10. Tight ...

  • Graco 255963 - page 12

    Installation 12 312747L Optional Accessories See Accessorie s page 28 f or a list of all accessories that can be used with doub le wall ho ppers. Immersion Heater Kit 256257 Immersion heater kit 2562 57 can only be used with a water mixture or oil in the outer jac ket ed area of the h op- per . 1. Remov e p lug (28) from side of hopp er (D). 2. App ...

  • Graco 255963 - page 13

    Installation 312747L 13 8. Set thermostat knob (TK) to desired spra y ma terial conditioning te mperature. Align tempe rature setting to set point (SP). NO TE: Set point (SP) is a “V” notc h in the metal brac ket at the top of the t hermostat dial. Maxim um setting is 140 °F (60°C). 9. Install immersion heater cov er (HC) with screws (HS). Se ...

  • Graco 255963 - page 14

    Setup 14 312747L Setup 1. Remov e the large A or B label fr om the label sheet (24) and apply t o front f ace of the appropriate hop - per to help av oid filling the wrong materials and causing cross-contamination. 2. Remov e the small A o r B from the label sheet (24) and apply on lid. Connect Return T ube and Recir culation Hose 1. Install return ...

  • Graco 255963 - page 15

    Setup 312747L 15 Fill Heating Fluid Fill the hopper’ s outer jack e ted area with oil or a 50% water an d 50% eth ylene glycol mixture t o heat yo ur spra y material. The doub le wall hopper de sign pre v ents the spr ay mat erial from losing heat during do wntime and ov ernight. 1. Remov e plug (6) from opposite end of 3/4 npt filling por t. 2. ...

  • Graco 255963 - page 16

    Setup 16 312747L 5. Install plug (6) in opposit e por t and torque to 20-30 ft-lbs (27-41 N•m). NO TE: Occasionall y inspect the inside of the hopper for any lea kage of outer c avity heat ing fluid. Fill Spra y Material Condition materials prior to adding to hoppe rs. Ensure resin materials are thoroughly a gitated, homogenous , and poura ble pr ...

  • Graco 255963 - page 17

    Operation 312747L 17 Operation Star tup 1. Ensure that the outer jac k eted area is filled with water mixture or oil and the ac cessor ies are cor- rectly installed. 2. Follo w Setup procedure in man ual 312359. 3. See manual 312 359 f or testing material and oper a- tion inst ructions bef ore spra ying material. Flush Hopper 1. Drain Spra y Materi ...

  • Graco 255963 - page 18

    Maintenance 18 312747L Maintenance Chec k Heating Fluid Level Gradual f luid e va poration can occur , theref ore , check the le v el of heating fluid monthly . 1. Remove plug (6). 2. Place flexible object in por t so that it protr udes down. Pull out to observe le ve l. 3. Refill heating fluid as nec essar y . See Fill Heating Fluid , page 15, f o ...

  • Graco 255963 - page 19

    Maintenance 312747L 19 Drain Spra y Material 1. Flush and Shutdown XM spra y er . See XM opera- tion manual. 2. T urn off all fluid heaters (S) and allow heating flu id to cool for a minimum of 8 ho urs. 3. Place a clean 1 gallon (4 liter) pail directly bene ath union (208 ) and ball valve (206). 4. Close ball v alv e (206) and open union (208 ) wi ...

  • Graco 255963 - page 20

    Repair 20 312747L Repair Remo ve Immer sion Heater 1. T ur n off powe r to system. See the XM Oper ation manual . 2. Drain Heating Fluid . See page 18. 3. Remov e scre ws (HS) and immersion heat er cov er (HC). 4. Disconnect white , blac k, and gr een wires from power cable (303). 5. Loosen b ushing (302) and pu ll power cable (303) out of bushing. ...

  • Graco 255963 - page 21

    Repair 312747L 21 Remo ve Hopper 1. Check Heating Fluid Level . See page 18. 2. Drain Spray Material . See page 19. 3. Disconnect s wiv el fitting (2 02). See F IG . 29. 4. If a transf e r pump (H) or agitator (J) is mounted to the hopper: a. Relieve pressure . See manual 312 769. b . Disconnect air hoses from agitat or and f eed pump. Disconnect f ...

  • Graco 255963 - page 22

    Troubleshooting 22 312747L T roub leshooting Prob lem Cause Solution Lid does not properly seal on hopper . Material build up . Remov e b uilt up material from gas- ket. Replace as necessar y . Damaged gask et. Material leaking betw een cov er an d hopper . Gask et is not sealed properly . Chec k f or bu ilt up material on gask et. Replace as neces ...

  • Graco 255963 - page 23

    Troubleshooting 312747L 23 ...

  • Graco 255963 - page 24

    Parts 24 312747L Pa r t s 255963, Double W all Hopper 1 Assemble with lips f acing down. T orque to 20-30 ft-lbs. Clean groov e with isoprop yl alcohol before applying gask et adhesiv e to plastic. Cut to length. 1 2 3 6 34 4 26 19 7 1c 9 8 10 13 39 28 36 37 1a 11 32 5 33 14 35 32 2 2 2 2 2 1b 24 3 3 12 36 2 6 2 ...

  • Graco 255963 - page 25

    Parts 312747L 25 255963, Double W all Hopper  Replacement Dange r and W arning labels, tags , and cards are av ailab le at no cost. † Supplied spacer kit is f o r installat ion of a 5:1 pump on this hopper . See manual 312769 f or inst ructions. Ref. P art Description Qty 1a HOPPER 1 1b CO VER 1 1c LID 1 4 255965 PLA TE, weldment 2 5 15T007 AD ...

  • Graco 255963 - page 26

    Parts 26 312747L 256259, Double W all Hopper Mounting Kit 107 101 Side Mounted Doub le W all Hopper 107 101 103 108 108 104 Back Mounted Double W all Ho pper 109 107 107 109 107 107 110 110 Ref. Part No. Descri ption Qty . 101 256224 BRA CKET , hopper , 20-gallon 1 103 256254 BRA CKET , hopper , wldmt, bottom mount 1 104 256256 BRA CKET , hopper , ...

  • Graco 255963 - page 27

    Parts 312747L 27 256170, Universal Hopper Fluid Outlet Kit * Parts used for 50 :1 pumps only . † P ar ts u sed with 70:1 pumps on ly . 216 210 209 207 205 204 203 202 206 207 208 201 211 215 212 Apply sealant to all non-swiv eling pipe threads. Do not use pipe sealant on swiv el fittings. 1 2 217 Ref. Part No. Descri ption Qty . 201 121435 N IPPL ...

  • Graco 255963 - page 28

    Accessories 28 312747L Accessories 262820, Flexib le Fluid Connection Kit F or gr avity f eed ing from 20 gallon hopper to propor- tioner with Xtreme lo wer . 256257, 240V 1 PH Immers ion Heater Kit F or non-e xplosiv e atmosphere s only . Includes re-settab le o v er temperatur e s witch. 1500 w atts; 140°F (60°C) maxim um tempera ture. 256512, ...

  • Graco 255963 - page 29

    Technical Data 312747L 29 Te c h n i c a l D a t a Dimensions Hopper 20 Gallon Heated Compat ible Hopper 256233 Maximum (con tinuous) temperature rating . . . . . . . . . . . . 140°F (60° C) Maximum pressu re rating (outer cavity) . . . . . . . . . . . . . . 0 psi (0 MP a, 0 bar) Inner T ank Capacity (spray material) . . . . . . . . . . . . . . . ...

  • Graco 255963 - page 30

    Technica l Data 30 312747L Hopper Stand Hopper on Stand 36 in. (914 mm) 14.5 in. (368 mm) 26.5 in. (673 mm) 1.5 in. (38 mm) 17.5 in. (445 mm) 1.5 in. (38 mm) ti19011a 42.3 in. (1074 mm) 75.4 in. (1915 mm) ...

  • Graco 255963 - page 31

    Technical Data 312747L 31 ...

  • Graco 255963 - page 32

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. For patent information, see www.graco.com/patents. Original instructions. T his manual contains English. MM 312747 Graco Headquarters: Minneapolis ...

Fabbricante Graco Categoria Pet Fence

I documenti che otteniamo dal fabbricante del dispositivoGraco 255963 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Graco
- manuali per l’uso 255963
- schede prodotto Graco
- opuscoli
- o etichette energetiche Graco 255963
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Graco 255963.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Graco 255963, manuali di manutenzione, brevi manuali o manuali utente Graco 255963. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Graco 255963.

Manuali per l’uso simili

Manuale completo del dispositivo Graco 255963, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Graco 255963 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Graco 255963.

Il manuale per l’uso completo Graco, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Graco 255963 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Graco 255963, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Graco 255963 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Graco 255963 - che ci dovrebbe aiutare nei primi passi durante l'uso Graco 255963
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Graco 255963
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Graco 255963 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Graco 255963?

Utilizza il modulo sottostante

Se non hai risolto il problema con Graco 255963 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Graco 255963 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)