-
Pioneer DEH-P9850BT - page 1
Black plate (1,1) Operation Manual Multi-CD control DSP High power CD/M P3/WMA/ AAC player with Bluetooth Wireless T echnology and FM/AM tuner DEH-P9850BT English <CRB2179-A/N>1 ...
-
Pioneer DEH-P9850BT - page 2
Black plate (2,1) Thank you for buying this P ioneer product. Please read through these operating instructions so you will know how to operate your model properly. A fter you have finished read ing the instructio ns, keep this man- ual in a safe place for futur e refer ence. Before Y ou Start About this unit 6 – Operating environment 6 About this ...
-
Pioneer DEH-P9850BT - page 3
Black plate (3,1) Displaying text information on MP3/WMA/ AAC/WA V disc 28 – When playing back an MP3/WMA/AAC disc 28 – When playing back a WAV disc 28 Scrolling text information in the display 28 Selecting tracks from the file name list 29 Displaying jacket arts on CD- ROM discs 29 – Reading jacket arts 29 – Selecting folders with jacket a ...
-
Pioneer DEH-P9850BT - page 4
Black plate (4,1) Displaying BD address of this unit 52 Displaying system version for repair 52 Multi-CD Player Playing a CD 53 Selecting a track directly 53 50-disc multi-CD player 54 Introduction of advanced multi-CD player operation 54 Repeating play 55 Playing tracks in random order 55 Scanning CDs and tracks 55 P ausing CD playback 56 Using IT ...
-
Pioneer DEH-P9850BT - page 5
Black plate (5,1) – Adjusting low pass filter attenuation slope 74 Using the high pass filter 75 – Muting the speaker units (filters) 75 – Setting the high pass filter for front speakers 75 – Setting the high pass filter for rear speakers 76 Using the auto-equalizer 76 Using the equalizer 76 – Recalling equalizer curves 76 – Adjusting e ...
-
Pioneer DEH-P9850BT - page 6
Black plate (6,1) About this unit CAUTION ! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids. ! Keep this manual handy as a reference for op- erating procedures and precautions. ! Always keep the volume low enough so that you c ...
-
Pioneer DEH-P9850BT - page 7
Black plate (7,1) Hands-free phoning This unit realizes effortless hands-free phoning with Bluetooth wireless technology . Bluetooth audio player compatibility When you use this unit with a Bluetooth audio player featuring Bluetooth wireless technol- ogy , you can control the Bluetooth audio player . iPod ® compatibility When you use this unit wit ...
-
Pioneer DEH-P9850BT - page 8
Black plate (8,1) ! The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners. Resetting the microprocessor The microprocessor must be reset under the following conditions: ! Prior to using this unit ...
-
Pioneer DEH-P9850BT - page 9
Black plate (9,1) ! A few seconds after turning the ignition switch to on or off, the front panel automati- cally moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it. Removing the front panel 1 Press and hold EJECT to open the front panel. 2 Slide and remove the front panel to- ward you. T ake care ...
-
Pioneer DEH-P9850BT - page 10
Black plate (10,1) Feature demo mode The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON. Pressing DISPLA Y during feature demo operation can- cels the feature demo mode. Press DISPLA Y again to start the feature demo mode. Remem- ber that if the feature demo continues operat- ...
-
Pioneer DEH-P9850BT - page 11
Black plate (11,1) Play mode (repeat play) — Random mode (random play) — Scan mode (scan play) — Pause (pause) — Search mode (search meth- od) — Title Input (disc title input) — Jacket art (jacket art read) Note Refer to Introduction of advanced built-in CD player operation on page 20. AUDIO button operation % Press AUDIO to select the ...
-
Pioneer DEH-P9850BT - page 12
Black plate (12,1) Head unit 1 EQ button Press to select various equalizer curves. 2 Connection status indicator Lights up when your cellular phone is con- nected via Bluetooth wireless technology. 3 DISPLA Y button Press to select different displays. 4 CLOCK button Press to change to the clock display . 5 PHONE button Press to select the phone as ...
-
Pioneer DEH-P9850BT - page 13
Black plate (13,1) e Joystick Move to per form manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. F unctions are the same as MUL TI-CONTROL except for volume con- trol. f DIRECT button Press to directly select the desired track. g CLEAR button Press to cancel the input number when 0 – 9 are u ...
-
Pioneer DEH-P9850BT - page 14
Black plate (14,1) T urning the unit on % Press SOURCE to tur n the unit on. When you select a source, the unit is turned on. Selecting a source Y ou can select a source you want to listen to. T o switch to the built-in CD player , load a disc in the unit (refer to page 19). % Press SOURCE to select a source. Press SOURCE repeatedly to switch betwe ...
-
Pioneer DEH-P9850BT - page 15
Black plate (15,1) ! There is sometimes a delay between starting up CD playback and the sound being issued. When being read, Format read is displayed. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play , check that the label side of the disc is up. P ress EJECT to eject the disc, and check the disc for dam ...
-
Pioneer DEH-P9850BT - page 16
Black plate (16,1) Listening to the radio 4 4 4 4 3 3 3 3 5 5 5 5 2 2 2 2 1 1 1 6 6 6 These are the basic steps necessar y to operate the radio. More advanced tuner operation is explained starting on the next page. Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on pa ...
-
Pioneer DEH-P9850BT - page 17
Black plate (17,1) Introduction of advanced tuner operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option; press to se- lect. The function name appears on the dis ...
-
Pioneer DEH-P9850BT - page 18
Black plate (18,1) 2 Press MUL TI-CONTROL to tur n BSM on. Searching is displayed. While Searching is displayed, the six strongest broadcast frequen- cies will be stored under preset tuning num- bers 1 – 6 in the order of their signal strength. When finished, the preset channel list ap- pears. # T o cancel the storage process, press MUL TI-CONTRO ...
-
Pioneer DEH-P9850BT - page 19
Black plate (19,1) Playing a CD 1 1 1 1 3 3 3 2 2 2 2 These are the basic steps necessar y to play a CD with your built-in CD player . More ad- vanced CD operation is explained starting on the next page. 1 T rack number indicator Shows the track number currently playing. 2 Play time indicator Shows the elapsed playing time of the cur- rent track. 3 ...
-
Pioneer DEH-P9850BT - page 20
Black plate (20,1) Introduction of advanced built-in CD player operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option; press to se- lect. The function name appea ...
-
Pioneer DEH-P9850BT - page 21
Black plate (21,1) Scanning tracks of a CD Scan play lets you hear the first 10 seconds of each track on the CD. 1 Use MUL TI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display. 2 Press MUL TI-CONTROL to tur n scan play on. The first 10 seconds of each track is played. 3 When you find the desired track press MUL TI-C ...
-
Pioneer DEH-P9850BT - page 22
Black plate (22,1) # If a disc contains less than 10 tracks, pushing and holding MUL TI-CONTROL left recalls the first track of the disc. Also, if the remaining number of tracks after searching ever y 10 tracks is less than 10, pushing and holding MUL TI-CONTROL left re- calls the first track of the disc. Using disc title functions Y ou can input C ...
-
Pioneer DEH-P9850BT - page 23
Black plate (23,1) Displaying disc titles Y ou can display the text information of any disc that has had a disc title entered. % Press DISPLA Y. Press DISPLA Y repeatedly to switch between the following settings: : disc title — Simple display Using CD TEXT functions Some discs have certain information encoded on the disc during manufacture. These ...
-
Pioneer DEH-P9850BT - page 24
Black plate (24,1) Playing MP3/WMA/AAC/ WA V files 3 3 3 3 6 6 6 4 4 4 4 2 2 2 2 5 5 5 1 1 1 1 These are the basic steps necessar y to play an MP3/WMA/AAC/WA V with your built-in CD player . More advanced MP3/WMA/AAC/WA V operation is explained starting on page 26. 1 MP3/WMA/AAC/WA V indicator Shows the type of file currently playing. 2 Folder numb ...
-
Pioneer DEH-P9850BT - page 25
Black plate (25,1) ! Playback is carried out in order of file number . Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.) ! When playing back files recorded as VBR (variable bit rate) files, the play time will not be correctly displayed if fast for ward or reverse operations are ...
-
Pioneer DEH-P9850BT - page 26
Black plate (26,1) Introduction of advanced built-in CD player (MP3/ WMA/AAC/WA V) operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option; press to se- lect. The ...
-
Pioneer DEH-P9850BT - page 27
Black plate (27,1) 3 Press MUL TI-CONTROL to tur n random play on. T racks will play in a random order within the previously selected Folder repeat or Disc repeat ranges. # T o turn random play off , press MUL TI-CONTROL again. Scanning folders and tracks While you are using Folder repeat , the begin- ning of each track in the selected folder plays ...
-
Pioneer DEH-P9850BT - page 28
Black plate (28,1) 1 Select the search method Rough search. Refer to Selecting the search method on the previous page. 2 Push and hold MUL TI-CONTROL left or right to search every 10 tracks in the cur - rent folder . # If the current folder contains less than 10 tracks, pushing and holding MUL TI-CONTROL right recalls the last track of the folder . ...
-
Pioneer DEH-P9850BT - page 29
Black plate (29,1) Notes ! Unlike MP3, WMA and AAC file format, W AV files display only the folder name and the file name. ! When Ever Scroll is set to ON at the initial set- ting, text information scrolls continuously in the display . Refer to Switching the Ever Scroll on page 87. Selecting tracks from the file name list File name list lets you se ...
-
Pioneer DEH-P9850BT - page 30
Black plate (30,1) Selecting folders with jacket arts Y ou can display the list of folders that are al- ready assigned jacket arts and select one to start playback. ! In the jacket art list, this unit displays up to 15 folders with jacket arts. ! F or other folders with no jacket arts re- corded, this unit automatically assigns pre- set images to t ...
-
Pioneer DEH-P9850BT - page 31
Black plate (31,1) Hands-free phoning with cellular phones featuring Bluetooth wireless technology 5 5 5 5 1 1 1 2 2 2 3 3 3 4 4 4 6 6 6 7 7 7 If your cellular phone features Bluetooth wir e- less technology , you can connect to this unit for hands-free, wireless calls, even while driving. Important ! Since this unit is on standby to connect with y ...
-
Pioneer DEH-P9850BT - page 32
Black plate (32,1) — OPP (Object P ush Profile) — HSP (Head Set Profile) — HFP (Hands F ree Profile) ! When phone is selected as a source, volume and equalizer curve are automatically chan- ged to suitable settings for the phone source. When the source is returned to another source, volume and equalizer settings auto- matically return to the ...
-
Pioneer DEH-P9850BT - page 33
Black plate (33,1) Basic operation of hands- free phoning These are the basic operations to use hands- free phoning via Bluetooth wireless technol- ogy . More advanced hands-free phoning op- erations are explained starting on Introduction of advanced hands-free phonin g operation on page 35. Making a phone call Dial a number The most basic way to m ...
-
Pioneer DEH-P9850BT - page 34
Black plate (34,1) T aking a phone call Answering an incoming call Even when a source other than T elephone is selected or when this unit itself is turned off , you can still answer incoming calls. If you set this unit to automatically answering incoming calls, refer to Setting the automatic answering on page 47. 1 When a call comes in, press MUL T ...
-
Pioneer DEH-P9850BT - page 35
Black plate (35,1) Introduction of advanced hands-free phoning operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option; press to se- lect. F unction names for han ...
-
Pioneer DEH-P9850BT - page 36
Black plate (36,1) ! Connection is normally established by HFP , which gives you a full control of functions available on the telephone source. How- ever , in some cases when you make con- nection from your cellular phone, the connection may be made by HSP and sev- eral functions may not be available. ! A phone may be connected via Bluetooth wirele ...
-
Pioneer DEH-P9850BT - page 37
Black plate (37,1) # The link code is set to 0000 as default. Y ou can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 88. Disconnecting a cellular phone When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection. 1 Use MUL TI-CONTROL to select ...
-
Pioneer DEH-P9850BT - page 38
Black plate (38,1) 2 Push MUL TI-CONTROL up or down to select a registration assignment. Each time MUL TI-CONTROL is pushed up or down, the registration assignment is switched in the following order: Phone1 (user phone 1) — Phone2 (user phone 2) — Phone3 (user phone 3) — Guest1 (guest phone 1) — Guest2 (guest phone 2) # If the assignment is ...
-
Pioneer DEH-P9850BT - page 39
Black plate (39,1) 1 Use MUL TI-CONTROL to select Auto connect in the function menu. Auto connect appears in the display . 2 Press MUL TI-CONTROL to tur n auto- matic connection on. ON appears in the display . If your cellular phone is set ready for Bluetooth wireless connection, the connection to this unit will be automatically established. # T o ...
-
Pioneer DEH-P9850BT - page 40
Black plate (40,1) Changing the Phone Book display order Y ou can choose to display the Phone Book sorted alphabetically by first name or last name. ! With some cellular phones, this feature may not be possible. 1 Use MUL TI-CONTROL to select Phone book name view in the function menu. Phone book name view appears in the dis- play . 2 Press MUL TI-C ...
-
Pioneer DEH-P9850BT - page 41
Black plate (41,1) 2 Use MUL TI-CONTROL to display the de- tailed list of your desired Phone Book entry . See step 2 to 5 on Calling a number in the Phone Book on the previous page for how to do this. 3 Press and hold MUL TI-CONTROL to dis- play the genre input screen. Edit genre is displayed. 4 Push MUL TI-CONTROL up or down to select a genre. Eac ...
-
Pioneer DEH-P9850BT - page 42
Black plate (42,1) Editing phone numbers Y ou can edit the phone numbers of Phone Book entries. 1 Press LIST to display the Phone Book. 2 Use MUL TI-CONTROL to display the de- tailed list of your desired Phone Book entry . See step 2 to 5 on Calling a number in the Phone Book on page 40 for how to do this. 3 Press and hold MUL TI-CONTROL to dis- pl ...
-
Pioneer DEH-P9850BT - page 43
Black plate (43,1) Note Y ou can rewrite icons of Phone Book entries. (Refer to Rewriting the entertainment displays and the icons for telephone functions on page 92.) Clearing a Phone Book entry Y ou can delete Phone Book entries in the Phone Book one by one. T o clear all of your entries in the Phone Book, refer to Clearing memor y on this page. ...
-
Pioneer DEH-P9850BT - page 44
Black plate (44,1) 1 Use MUL TI-CONTROL to select Clear memory in the function menu. Clear memory appears in the display. 2 Push MUL TI-CONTROL up or down to select an item. Each time MUL TI-CONTROL is pushed up or down, the items are switched in the following order: Phone book (phone book) — Missed calls (missed call histor y) — Dialled calls ...
-
Pioneer DEH-P9850BT - page 45
Black plate (45,1) Calling a number from the Call History 1 Display the list and select a phone num- ber . Display the phone number you want to make a call. 2 Push MUL TI-CONTROL right to display the detailed list. Calling time and date, and phone number are displayed in the detailed list. # If the number is already in the Phone Book then the name ...
-
Pioneer DEH-P9850BT - page 46
Black plate (46,1) 2 Push MUL TI-CONTROL up or down to select a number . Pushing MUL TI-CONTROL up repeatedly changes numbers in 012. . .9+#*_ order . Pushing it down changes in _*#+9. . .210 order . # Y ou can also input numbers by pressing 0 – 9 on the remote control. 3 Push MUL TI-CONTROL right to move the cursor to the next position. When the ...
-
Pioneer DEH-P9850BT - page 47
Black plate (47,1) Setting the automatic rejecting If this function is on, this unit automatically re- jects all incoming calls. ! This feature cannot be set for each different user phone. 1 Use MUL TI-CONTROL to select Refuse calls in the function menu. Refuse calls appears in the display. 2 Press MUL TI-CONTROL to tur n auto- matic call rejection ...
-
Pioneer DEH-P9850BT - page 48
Black plate (48,1) Displaying BD address of your cellular phone 1 Use MUL TI-CONTROL to select Delete phone in the function menu. Delete phone appears in the display . 2 Push MUL TI-CONTROL up or down to select a registration assignment. Each time MUL TI-CONTROL is pushed up or down, the registration assignment is switched in the following order: P ...
-
Pioneer DEH-P9850BT - page 49
Black plate (49,1) Listening to songs on BT Audio (Bluetooth audio player) 1 1 1 2 2 2 Y ou can use this unit to contr ol a separately sold portable audio player featuring Bluetooth wireless technology (Bluetooth audio player). Even though your audio player does not con- tain a Bluetooth module, you can still control it from this unit via Bluetooth ...
-
Pioneer DEH-P9850BT - page 50
Black plate (50,1) 2 Connection Refer to Connecting a Bluetooth audio player on this page on how to connect your Blue- tooth audio player to this unit. # Once connected via Bluetooth wireless tech- nology , “ Play ” , “ Stop ” and “ P ause ” on Bluetooth audio player can be operated in the BT Audio source. # Before you can use audio pla ...
-
Pioneer DEH-P9850BT - page 51
Black plate (51,1) Function operation 1 1 1 1 Function display Shows the function status. Once connected via Bluetooth wireless tech- nology , “ Play ” , “ Stop ” and other functions on Bluetooth audio player can be controlled from this unit ’ s function menu. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AI ...
-
Pioneer DEH-P9850BT - page 52
Black plate (52,1) 2 Press MUL TI-CONTROL to stop the play- back. Playback of the current song stops. Disconnecting a Bluetooth audio player When you are done using your Bluetooth audio player with this unit, you can close the Bluetooth wireless connection. 1 Use MUL TI-CONTROL to select Disconnect audio in the function menu. Disconnect audio appea ...
-
Pioneer DEH-P9850BT - page 53
Black plate (53,1) Playing a CD 2 2 2 2 4 4 4 3 3 3 3 1 1 1 1 Y ou can use this unit to contr ol a multi-CD player , which is sold separately . These are the basic steps necessar y to play a CD with your multi-CD player . More advanced CD operation is explained starting on the next page. 1 Disc number indicator Shows the disc number currently playi ...
-
Pioneer DEH-P9850BT - page 54
Black plate (54,1) 3 Press DIRECT. The track of entered number will play. Note After entering the number input mode, if you do not per form an operation within about eight sec- onds, the mode is automatically canceled. 50-disc multi-CD player Only those functions described in this manual are supported by 50-disc multi- CD players. This unit is not ...
-
Pioneer DEH-P9850BT - page 55
Black plate (55,1) ! If you do not operate the function within about 30 seconds, the display is automatically re- turned to the playback display. Repeating play There are three repeat play ranges for the multi-CD player: Multi-CD repeat (multi- CD player repeat), T rack repeat (one-track repeat) and Disc repeat (disc repeat). 1 Use MUL TI-CONTROL t ...
-
Pioneer DEH-P9850BT - page 56
Black plate (56,1) Note After track or disc scanning is finished, normal playback of the tracks will begin again. Pausing CD playback P ause lets you temporarily stop playback of the CD. 1 Use MUL TI-CONTROL to select Pause in the function menu. Pause appears in the display. 2 Press MUL TI-CONTROL to tur n pause on. Playback of the current track pa ...
-
Pioneer DEH-P9850BT - page 57
Black plate (57,1) Erasing a track from your ITS playlist Y ou can delete a track from your ITS playlist if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, use MUL TI-CONTROL . 1 Play the CD with the track you want to delete from your ITS playlist, and turn ITS play on. Refer to Playback from your ITS playl ...
-
Pioneer DEH-P9850BT - page 58
Black plate (58,1) 4 Push MUL TI-CONTROL up or down to select a letter of the alphabet. Each time MUL TI-CONTROL is pushed up, al- phabet, numbers or symbols are displayed in ascending order ( A B C ... ). Each time MUL TI-CONTROL is pushed down, letters are displayed in descending order . 5 Push MUL TI-CONTROL right to move the cursor to the next ...
-
Pioneer DEH-P9850BT - page 59
Black plate (59,1) Displaying text information on CD TEXT discs % Press DISPLA Y. Press DISPLA Y repeatedly to switch between the following settings: : disc title — : disc artist name — : track title — : track artist name — : disc title and : disc artist name — : track title and : track artist name — Simple display # If specific informa ...
-
Pioneer DEH-P9850BT - page 60
Black plate (60,1) Listening to songs on your iPod 3 3 3 2 2 2 2 1 1 1 1 Y ou can use this unit to contr ol an iP od adapter , which is sold separately . These are the basic steps necessar y to operate an iP od adapter . More advanced iP od adapter operation is explained starting on Intr oduction of advanced iP od adapter operation on page 62. 1 So ...
-
Pioneer DEH-P9850BT - page 61
Black plate (61,1) Searching for a song 1 Press LIST to switch to the top menu of the list search. 2 Use MUL TI-CONTROL to select a Genres, Artists, Albums or Songs from among the categories. T urn to change the categor y ; press to select. List from the selected categor y is displayed. 3 Use MUL TI-CONTROL to select a song, album, artist or genre. ...
-
Pioneer DEH-P9850BT - page 62
Black plate (62,1) Introduction of advanced iPod adapter operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option; press to se- lect. The function name appears on ...
-
Pioneer DEH-P9850BT - page 63
Black plate (63,1) Pausing a song P ause lets you temporarily stop playback of a song. 1 Use MUL TI-CONTROL to select Pause in the function menu. Pause appears in the display. 2 Press MUL TI-CONTROL to tur n pause on. Playback of the current song pauses. # T o turn pause off , press MUL TI-CONTROL again. <CRB2179-A/N>63 Playing songs on iPod ...
-
Pioneer DEH-P9850BT - page 64
Black plate (64,1) W atching the television 2 2 2 2 1 1 1 1 3 3 3 3 Y ou can use this unit to contr ol a TV tuner , which is sold separately . F or details concerning operation, refer to the TV tuner ’ s operation manual. This section pro - vides information on TV operations with this unit which differs from that described in the TV tuner ’ s o ...
-
Pioneer DEH-P9850BT - page 65
Black plate (65,1) Introduction of advanced TV tuner operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. BSSM appears on the display . # T o return to the channel display, press BAND . Note ...
-
Pioneer DEH-P9850BT - page 66
Black plate (66,1) # If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically . Note Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P01 – P12 . Selecting stations from the preset channel list The preset channel list lets you see the list of preset ...
-
Pioneer DEH-P9850BT - page 67
Black plate (67,1) Playing a disc 3 3 3 3 5 5 5 4 4 4 4 2 2 2 2 1 1 1 1 Y ou can use this unit to control a DVD player or multi-DVD player , which is sold separately . F or details concerning operation, refer to the DVD player ’ s or multi-DVD player ’ s operation manual. This section provides information on DVD operations with this unit which ...
-
Pioneer DEH-P9850BT - page 68
Black plate (68,1) Introduction of advanced DVD player operation 1 1 1 1 Function display Shows the function status. 1 Press MUL TI-CONTROL to display the main menu. FUNCTION , AUDIO and ENTERT AINMENT appear on the display . 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option; press to se- lect. The function name appears on th ...
-
Pioneer DEH-P9850BT - page 69
Black plate (69,1) ! During video CD or CD playback, if you per- form track search or fast forward/reverse dur- ing T rack repeat , the repeat play range changes to Disc repeat . ! During MP3/WMA playback, if you select an- other folder during repeat play , the repeat play range changes to Disc repeat . ! During MP3/WMA playback, if you per form tr ...
-
Pioneer DEH-P9850BT - page 70
Black plate (70,1) Entering disc titles Disc title input lets you input CD titles up to 10 letters long into the DVD player . F or details concerning operation, refer to Entering disc ti- tles on page 57. ! Y ou can operate this function only when a DVD player is connected to this unit. ! When playing a CD TEXT disc on a CD TEXT compatible DVD play ...
-
Pioneer DEH-P9850BT - page 71
Black plate (71,1) Adjusting the audio easily The following functions let you easily adjust your audio system to match the car interior acoustic characteristics, which var y depend- ing on the type of car . ! Recalling equalizer cur ves ! Using the position selector ( Position ) ! Adjusting equalizer cur ves Adjusting the audio finely By carr ying ...
-
Pioneer DEH-P9850BT - page 72
Black plate (72,1) Fader (balance adjustment) — Position (posi- tion selector) — T A Mode (time alignment set- ting) — Time Alignment (time alignment adjusting) — Loudness (loudness) — Powerful (graphic equalizer adjustment) — FREQ. (16- band graphic equalizer adjustment) — Subwoofer1 (subwoofer on/off) — Subwoofer2 (subwoofer cut-o ...
-
Pioneer DEH-P9850BT - page 73
Black plate (73,1) Front 25 to Rear 25 is displayed as the front/ rear speaker balance moves from front to rear . # Front/Rear 0 is the proper setting when only two speakers are used. 3 Push MUL TI-CONTROL left or right to adjust left/right speaker balance. Each time MUL TI-CONTROL is pushed lef t or right, the left/right speaker balance moves to- ...
-
Pioneer DEH-P9850BT - page 74
Black plate (74,1) F ront speaker left — F ront speaker right — Rear speaker right — Rear speaker left — Subwoofer left — Subwoofer right # Y ou cannot select subwoofer left and subwoo- fer right when the subwoofer output is off. 5 Push MUL TI-CONTROL up or down to adjust the distance between the selected speaker and the listening positio ...
-
Pioneer DEH-P9850BT - page 75
Black plate (75,1) 1 Use MUL TI-CONTROL to select Subwoofer3. Subwoofer3 appears in the display. # When the subwoofer output is on, you can se- lect Subwoofer3 . 2 Push MUL TI-CONTROL up or down to select the phase of subwoofer output. Push MUL TI-CONTROL up to select normal phase and appears in the display . P ush MUL TI-CONTROL down to select rev ...
-
Pioneer DEH-P9850BT - page 76
Black plate (76,1) 50 — 63 — 80 — 100 — 125 — 160 — 200 (Hz) Only frequencies higher than those in the se- lected range are output from the front speak- ers. 5 Push MUL TI-CONTROL up or down to adjust the output level of the front speak- ers. Each time MUL TI-CONTROL is pushed up or down, the level of the front speakers increases or dec ...
-
Pioneer DEH-P9850BT - page 77
Black plate (77,1) Display Equalizer curve Powerful Powerful Natural Natural V ocal V ocal Flat Flat Custom1 Custom 1 Custom2 Custom 2 Super Bass Super bass ! Custom1 and Custom2 are adjusted equal- izer cur ves that you create. Adjustments can be made with a 16-band graphic equal- izer . ! When Flat is selected no supplement or correction is made ...
-
Pioneer DEH-P9850BT - page 78
Black plate (78,1) 2 Use MUL TI-CONTROL to select 16-band graphic equalizer adjustment. FREQ. appears in the display. 3 Push MUL TI-CONTROL left or right to select the equalizer band to adjust. Each time MUL TI-CONTROL is pushed lef t or right, equalizer bands are selected in the fol- lowing order: 20 — 31.5 — 50 — 80 — 125 — 200 — 315 ...
-
Pioneer DEH-P9850BT - page 79
Black plate (79,1) 3 Push MUL TI-CONTROL left or right to select the desired setting. Each time MUL TI-CONTROL is pushed lef t or right, settings are selected in the following order: COMP 1 — COMP 2 — BMX 1 — BMX 2 Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Use MUL TI-CONTROL to ...
-
Pioneer DEH-P9850BT - page 80
Black plate (80,1) Auto T A and EQ (auto-time alignment and auto- equalizing) The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position. The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto -equalizer cur ve based on that information ...
-
Pioneer DEH-P9850BT - page 81
Black plate (81,1) — When delays occur for low sounds due to the influence of the LPF on active subwoofers or external amps. ! Auto T A and EQ changes the audio settings as below : — The fader/balance settings return to the center position. (Refer to page 72.) — The graphic equalizer cur ve switches to Flat . (Refer to page 76.) — When a su ...
-
Pioneer DEH-P9850BT - page 82
Black plate (82,1) 8 Press MUL TI-CONTROL to start the auto T A and EQ. 9 Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is outputted from the speakers, and auto T A and EQ be- gins. # When all speakers are connected, auto T A and EQ is completed in about six minutes. # T o ...
-
Pioneer DEH-P9850BT - page 83
Black plate (83,1) Adjusting initial settings 1 1 1 Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press MUL TI-CONTROL and hold until Language select appears in the display . 3 T ...
-
Pioneer DEH-P9850BT - page 84
Black plate (84,1) 3 Push MUL TI-CONTROL up or down to set the date. Pushing MUL TI-CONTROL up will increase the selected day , month or year . P ushing MUL TI-CONTROL down will decrease the se- lected day , month or year . Setting the clock Use these instructions to set the clock. 1 Use MUL TI-CONTROL to select Clock. Clock appears in the display ...
-
Pioneer DEH-P9850BT - page 85
Black plate (85,1) 2 Press MUL TI-CONTROL to select the AM tuning step. Pressing MUL TI-CONTROL repeatedly will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will ap- pear in the display . Switching the warning tone If the front panel is not detached from the head unit within four seconds of turning off the ignitio ...
-
Pioneer DEH-P9850BT - page 86
Black plate (86,1) 2 Push MUL TI-CONTROL left or right to adjust the brightness level. Each time MUL TI-CONTROL is pushed lef t or right, brightness level increases or decreases. 0 to 31 is displayed as the level is increased or decreased. # When dimmer is functioning, the brightness level can be adjusted 0 to 21 . Correcting distorted sound When l ...
-
Pioneer DEH-P9850BT - page 87
Black plate (87,1) Switching the reverse mode If you do not per form an operation within about 30 seconds, screen indications start to reverse, and then continue reversing ever y 10 seconds. 1 Use MUL TI-CONTROL to select Reverse mode. Reverse mode appears in the display. 2 Press MUL TI-CONTROL to tur n the re- verse mode on. ON appears in the disp ...
-
Pioneer DEH-P9850BT - page 88
Black plate (88,1) 2 Press MUL TI-CONTROL to tur n the BT Audio source on. ON appears in the display . # T o turn the BT Audio source off , press MUL TI-CONTROL again. Entering PIN code for Bluetooth wireless connection T o connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verif ...
-
Pioneer DEH-P9850BT - page 89
Black plate (89,1) T urning the clock display on or off Y ou can turn the clock display on or off. % Press CLOCK to tur n the clock display on or off. Each press of CLOCK turns the clock display on or off . Note Even when the sources are off , the clock display appears on the display . Pressing CLOCK when the sources and feature demo are off, turns ...
-
Pioneer DEH-P9850BT - page 90
Black plate (90,1) 3 Push MUL TI-CONTROL up or down to select a letter of the alphabet. Each time MUL TI-CONTROL is pushed up, al- phabet, numbers or symbols are displayed in ascending order ( A B C ... ). Each time MUL TI-CONTROL is pushed down, letters are displayed in descending order . 4 Push MUL TI-CONTROL right to move the cursor to the next ...
-
Pioneer DEH-P9850BT - page 91
Black plate (91,1) 2 Use MUL TI-CONTROL to select ENTERT AINMENT. T urn to change the menu option; press to se- lect. 3 T urn MUL TI-CONTROL to select a de- sired entertainment display . T urn MUL TI-CONTROL clockwise or counter- clockwise to switch between the displays in the following order: Standard (standard) — Visualizer1 (visualizer 1) — ...
-
Pioneer DEH-P9850BT - page 92
Black plate (92,1) # Y ou cannot use ENTERT AINMENT on the re- mote control to switch between the background display . 4 When BGV1, BGV2 or T exture3 is se- lected, push MUL TI-CONTROL up or down to select a desired color for the back- ground. Each time MUL TI-CONTROL is pushed up or down, the background color changes. Y ou can select the backgroun ...
-
Pioneer DEH-P9850BT - page 93
Black plate (93,1) Understanding built-in CD player error messages When you contact your dealer or your nearest Pioneer Service Center , be sure to record the error message. Message Cause Action ERROR-11, 12, 17, 30 Dirty disc Clean disc. ERROR-11, 12, 17, 30 Scratched disc Replace disc. ERROR-10, 11, 12, 15, 17, 30, A0 Electrical or me- chanical T ...
-
Pioneer DEH-P9850BT - page 94
Black plate (94,1) Understanding error message on rewriting the entertainment displays When you contact your dealer or your nearest Pioneer Service Center , be sure to record the error message. Message Cause Action CD ERROR CD player error Press EJECT and check the disc. CD ERROR A0 Electrical error T urn the ignition ON and OFF . Disc ERROR The di ...
-
Pioneer DEH-P9850BT - page 95
Black plate (95,1) ! Playback of discs recorded on a personal computer may not be possible, depending on the application settings and the environ- ment. Please record with the correct for- mat. (For details, contact the manufacturer of the application.) ! Playback of CD-R/CD -RW discs may be- come impossible in case of direct exposure to sunlight, ...
-
Pioneer DEH-P9850BT - page 96
Black plate (96,1) ! When playing discs with MP3/WMA/AAC/ WA V files and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/WMA/AAC/WAV and CD-DA. ! The folder selection sequence for playback and other operations becomes the writing sequence used by the writing sof tware. For this rea ...
-
Pioneer DEH-P9850BT - page 97
Black plate (97,1) ! This unit plays back AAC files in the sam- pling frequencies 11.025, 16, 22.05, 24, 32, 44.1 and 48 kHz. ! The sound quality of AAC files generally be- comes better with an increased transmis- sion rate. This unit can play recordings with transmission rates from 16 kbps to 320 kbps, but in order to be able to enjoy sound of a c ...
-
Pioneer DEH-P9850BT - page 98
Black plate (98,1) ! MP3/WMA/AAC/W AV files in up to 8 tiers of folders can be played back. However , there is a delay in the start of playback on discs with numerous tiers. For this reason we recom- mend creating discs with no more than 2 tiers. ! It is possible to play back up to 99 folders on one disc. <CRB2179-A/N>98 Additional Informatio ...
-
Pioneer DEH-P9850BT - page 99
Black plate (99,1) T erms A2DP A2DP is short for Advanced Audio Distribution Profile. This profile allows the high quality audio data of either stereo or monaural to be transmitted via Bluetooth wireless technology. AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG 2 and MPEG 4. A VRCP ...
-
Pioneer DEH-P9850BT - page 100
Black plate (100,1) Linear PCM (LPCM)/Pulse code modulation This stands for linear pulse code modulation, which is the signal recording system used for music CDs and DVDs. m3u Playlists created using the “ WINAMP ” soft- ware have a playlist file extension (.m3u). MP3 MP3 is short for MPEG Audio Layer 3. It is an audio compression standard set ...
-
Pioneer DEH-P9850BT - page 101
Black plate (101,1) Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system ................... Negative type Max. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 17 8 × 5 0 × 1 6 ...
-
Pioneer DEH-P9850BT - page 102
Black plate (102,1) Profile ............................................ GA P ( G eneric Access Pro- file) SDP (Ser vice Discover y Pro- tocol) HSP (Head Set Profile) HFP (Hands Free P rofile) A2DP (Advanced Audio Dis- tribution Profile) AVRCP (Audio Video Re- mote Control Profile) OPP (Object Push P rofile) Infrared remote control W avelength .... ...
-
Pioneer DEH-P9850BT - page 103
Black plate (103,1) <CRB2179-A/N>103 En 103 English ...
-
Pioneer DEH-P9850BT - page 104
Black plate (104,1) PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGUR O-KU , TOKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O. Box 1540, Long Beach, Calif ornia 90801-1540, U .S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. L TD. 253 Al ...
Hai una domanda su Pioneer DEH-P9850BT?
Utilizza il modulo sottostante
Se non hai risolto il problema con Pioneer DEH-P9850BT con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Pioneer DEH-P9850BT è probabile che voglia condividere il modo di risolverlo.