Italiano dropdown-ico

Manuale per l’uso Greenheck SE1

40 pagine 2.37 mb
Scarica

Vai alla pagina of 40

Summary
  • Greenheck SE1 - page 1

    1 Sidewall Propeller Fans Belt and Direct Drive Exhaust, Supply and Reversible December 2007 ...

  • Greenheck SE1 - page 2

    2 Greenheck’s sidewall propeller fan line is the ideal choice for factory and warehouse applications where high volumes of air and low pressures are required. From general ventilation to industrial duty, the range of construction and performance capabilities offered in this catalog represent the most comprehensive sidewall propeller fan line in t ...

  • Greenheck SE1 - page 3

    3 Model Comparison Direct Drive Fan Selection Three propeller and drive frame combinations are available. Models SE1 and SS1 are designed for smaller size applications where lower volumes and static pressures are found. Models SE2, SS2, SCE3 and SCS3 are designed and constructed for applications with higher volumes and static pressures. Belt Drive ...

  • Greenheck SE1 - page 4

    4 Mounting Options Overview wal l wall Mounting Option Description Page Standard W all Mounting Fan can be mounted directly to a wall. 5 Standard Horizontal Mounting Fan can be horizontally mounted to move air up or down. 6 W all Collar The wall collar is an easy way to mount the sidewall propeller fan and its accessories. 7 W all Housing The wall ...

  • Greenheck SE1 - page 5

    5 Mounting Fan Dir ectly to W all The split drawing below illustrates the typical ways of mounting fans directly to the wall when a wall housing or collar is not used. For exhaust fans, there is a minimum dimension (M) which must be maintained between the propeller and damper or guard to achieve optimum performance (failure to meet this minimum dim ...

  • Greenheck SE1 - page 6

    6 Horizontally mounted fans are available for applications requiring vertical airflow. Typical applications include mounting fans in ductwork or plenums as transfer fans or suspending them from the ceiling in a wall housing for use as recirculation fans. Both belt and direct drive fans can be horizontally mounted. Motors can be mounted on top or on ...

  • Greenheck SE1 - page 7

    7 Wall collars offer an alternate method for mounting sidewall propeller fans and the optional accessories shown here. Standard construction is of galvanized steel (painted steel is optional) with heavy gauge mounting flanges and pre-punched mounting holes. Size Wall Collar Damper Guard Weatherhood Motor Side Guard Damper A B** W.O. C D E F Width G ...

  • Greenheck SE1 - page 8

    8 Wall housings are the safest, most efficient and sturdy platform for mounting sidewall propeller fans and their optional accessories. Wall housings allow for a wide range of mounting arrangements to meet specific applications. It is constructed of galvanized steel (painted steel optional) with heavy gauge mounting flanges and prepunched mounting ...

  • Greenheck SE1 - page 9

    9 The wall housing is designed to reduce installation time and provide maximum installation flexibility. Attached accessories such as backdraft dampers, guards and weatherhoods may mount to either end. As a result a wide variety of configurations are available to accommodate the needs of the system designer. The following information will help dete ...

  • Greenheck SE1 - page 10

    10 Filtered supply wall housings are available in seven sizes for fans ranging from size 24 to 54 inches (610 to 1372 mm). They are designed with the draw-thru concept to achieve the highest filter and fan efficiencies. Standard construction is galvanized steel (painted steel optional). Mounting flanges are factory installed for either flush exteri ...

  • Greenheck SE1 - page 11

    11 Backdraft Dampers Used alone or in conjunction with the wall housing or wall collar, backdraft dampers are available for exhaust or supply configurations. Backdraft dampers are constructed with galvanized frames, aluminum blades and vinyl blade seals. Actuators are available in 24, 120, 208, 230 or 460 volts. Actuators for 50 cycle voltages are ...

  • Greenheck SE1 - page 12

    12 Other Options and Accessories Electrical Disconnect Switches Toggle type and heavy duty disconnect switches are available for positive electrical shut-off and safety in servicing fans. The following switches are available to meet individual electrical requirements and can be factory mounted or shipped loose for field mounting. Wiring from the mo ...

  • Greenheck SE1 - page 13

    13 Basics of Fan Selection Direct Drive Model Number Code The model number system is designed to completely identify the fan. The correct code letters must be specified to designate direct drive with exhaust or supply air configuration. The remainder of the model number is determined by the size and performance selected from pages 15 through 21. S ...

  • Greenheck SE1 - page 14

    14 Panel/Drive frame - Galvanized steel with one-piece drawn venturi Sizes 8-12; D, G, & E motor speeds - zinc plated heavy welded wire guard/support structure (paint optional). Sizes 12-24; A, B, & C motor speeds - bolted structural steel channels and motor plate. (paint optional). Propeller - Aluminum blades riveted to a steel hub. Motors ...

  • Greenheck SE1 - page 15

    15 Performance certified is for Models SE1/SS1 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness va ...

  • Greenheck SE1 - page 16

    16 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate (paint optional). Propeller - Heavy duty, welded and gusseted painted steel. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max. Motor Frame Size Approx. Weight (lbs.) Fan Size Fan Panel Drive Frame ...

  • Greenheck SE1 - page 17

    17 Direct Drive - Level 2 Model SE2 for exhaust — Model SS2 for supply Performance certified is for Models SE2/SS2 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is ...

  • Greenheck SE1 - page 18

    18 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate. (paint optional). Propeller - Heavy duty, cast aluminum. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max. Motor Frame Size Approx. Weight (lbs.) Fan Size Fan Panel Drive Frame Prop Hub Prop Blad ...

  • Greenheck SE1 - page 19

    19 Direct Drive - Level 3 Model SCE3 for exhaust — Model SCS3 for supply Performance certified is for Models SCE3/SCS3 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance ...

  • Greenheck SE1 - page 20

    20 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate. (paint optional). Propeller - Heavy duty, cast aluminum. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max. Motor Frame Size Approx. Weight (lbs.) Fan Size Fan Panel Drive Frame Prop Hub Prop Blad ...

  • Greenheck SE1 - page 21

    21 Direct Drive - Level 3 - Reversible Model SCR3 Reversible for exhaust and supply Performance certified is for Model SCR3 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performa ...

  • Greenheck SE1 - page 22

    22 The model number system is designed to completely identify the fan. The correct code letters must be specified to designate belt drive with exhaust or supply air configuration. The remainder of the model number is determined by the size and performance selected from pages 26 through 38. Belt Drive Model Number Code SB E - 2 L 24 - 7 Sidewall Bel ...

  • Greenheck SE1 - page 23

    23 Propeller - Galvanized steel, riveted blades (aluminum optional). Bearings - Stamped steel pillow blocks up to size 36 and cast pillow blocks for size 42 and larger. Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/bearing plate (paint optional). Material Gauges Shaft Size Ma ...

  • Greenheck SE1 - page 24

    24 Propeller - Reinforced galvanized steel, riveted blades, keyed hub. Bearings - Cast iron pillow blocks with grease fittings. Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/bearing plate (paint optional). Material Gauges Shaft Size Max Motor Frame Size Approx. Weight (lbs.) ...

  • Greenheck SE1 - page 25

    25 Propellers - SBE-3/SBS-3 - Heavy duty, welded, reinforced, steel blades coated in Permatector™. SBCE-3/SBCS-3 - Heavy duty, cast aluminum blades. All with keyed hubs. Bearings - Cast iron pillow blocks with grease fittings. Panel/Drive Frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/b ...

  • Greenheck SE1 - page 26

    26 Using The Performance Table Shown below is a portion of a typical performance table used in this catalog. Performance data shown offers the best selections for each propeller type (“L” or “H”) relative to sound, RPM and static pressure. Consider “L” type propellers first for most applications. Many sidewall applications can be met wi ...

  • Greenheck SE1 - page 27

    27 24 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is b ...

  • Greenheck SE1 - page 28

    28 30 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is b ...

  • Greenheck SE1 - page 29

    29 36 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 551 H - 694 Max Motor Frame Size - 56 TS = RPM x 7.854 SBE/SBS-1L36-3 1/3 329 0.25 12.3 9491 6448 361 ...

  • Greenheck SE1 - page 30

    30 42 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 424 H - 533 Max Motor Frame Size - 145T TS = RPM x 10.995 SBE/SBS-1L42-3 1/3 250 0.24 9.4 11651 275 0. ...

  • Greenheck SE1 - page 31

    31 48 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 355 H - 429 Max Motor Frame Size - 145T TS = RPM x 12.566 SBE/SBS-1L48-5 1/2 231 0.31 8.6 14885 266 0. ...

  • Greenheck SE1 - page 32

    32 54 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 343 H - 377 Max Motor Frame Size - 145T TS = RPM x 13.135 SBE/SBS-1L54-7 3/4 224 0.51 10.7 19676 12031 ...

  • Greenheck SE1 - page 33

    33 60 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is b ...

  • Greenheck SE1 - page 34

    34 24-30 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Performance certified is for Models SBCE/SBCS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is no ...

  • Greenheck SE1 - page 35

    35 36-42 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 36 Performance Max RPM L - 1183 H - 1480 Max Motor Frame Size - 184T TS = RPM x 9.424 SBCE/SBCS-3L36-7 3/4 516 0. ...

  • Greenheck SE1 - page 36

    36 48-54 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 48 Performance Max RPM L - 908 H - 1182 Max Motor Frame Size - 215T TS = RPM x 12.566 SBCE/SBCS-3L48-15 1 1 ⁄ 2 ...

  • Greenheck SE1 - page 37

    37 60-72 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 60 Performance Max RPM L - 620 H - 775 Max Motor Frame Size - 254T TS = RPM x 15.691 SBCE/SBCS-3L60-20 2 310 1.51 ...

  • Greenheck SE1 - page 38

    38 24-72 Belt Drive SBCR Reversible (Exhaust and Supply) Performance certified is for Model SBCR for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is based on actual spee ...

  • Greenheck SE1 - page 39

    39 Belt Drive Specifications Belt Drive Belt driven, axial type sidewall fans shall be provided as follows: Propellers shall be constructed with fabricated steel, fabricated aluminum, or cast aluminum blades and hubs. Propellers shall be securely attached to fan shafts. All propellers shall be statically and dynamically balanced to AMCA standard 20 ...

  • Greenheck SE1 - page 40

    Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option when returned to our factory, transportation prepaid. Motors are warranted by the motor manufacturer for a period of ...

Fabbricante Greenheck Categoria Ventilation Hood

I documenti che otteniamo dal fabbricante del dispositivoGreenheck SE1 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Greenheck
- manuali per l’uso SE1
- schede prodotto Greenheck
- opuscoli
- o etichette energetiche Greenheck SE1
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Greenheck SE1.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Greenheck SE1, manuali di manutenzione, brevi manuali o manuali utente Greenheck SE1. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Greenheck SE1.

Manuali per l’uso simili

Manuale completo del dispositivo Greenheck SE1, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Greenheck SE1 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Greenheck SE1.

Il manuale per l’uso completo Greenheck, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Greenheck SE1 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Greenheck SE1, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Greenheck SE1 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Greenheck SE1 - che ci dovrebbe aiutare nei primi passi durante l'uso Greenheck SE1
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Greenheck SE1
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Greenheck SE1 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Greenheck SE1?

Utilizza il modulo sottostante

Se non hai risolto il problema con Greenheck SE1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Greenheck SE1 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)