-
Jura Capresso IMPRESSAS9 - page 1
IMPRESSA S90/S95/S9 IMPRESSA 701/601 Instructions for use 5/04 Art. Nr. 63720 ...
-
Jura Capresso IMPRESSAS9 - page 2
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Impressa S90/S95/S9 – 701/601 English ................................................................................................................. 6 – 22 Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet htt ...
-
Jura Capresso IMPRESSAS9 - page 3
1 2 3 Fig. 10 A B Fig. 11 Fig. 12 Fig. 13 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 ...
-
Jura Capresso IMPRESSAS9 - page 4
7 8 9 17 18 12 13 14 15 16 19 10 11 20 22 21 6 5 4 3 2 1 23 D C B A E F G H ...
-
Jura Capresso IMPRESSAS9 - page 5
Instructions for use 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 large cups 5 Coffee key for 1 large cup 6 Coffee key for 2 small cups 7 Coffee key for 1 small cup 8 Key for special coffee 9 ON/OFF switch 10 Rinsing key 11 Display dialogue system 12 Water tank with carrying handle 13 Cove ...
-
Jura Capresso IMPRESSAS9 - page 6
6 T able of contents Jura Impressa 1. Description ........................................................ page 7 2. Safety instructions .............................................. page 7 2.1 Warnings ................................................... page 7 2.2 Safety precautions ........................................ page 7 3. Check before ...
-
Jura Capresso IMPRESSAS9 - page 7
7 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular pro- blems occur that are not dealt with in these operating instructions in ...
-
Jura Capresso IMPRESSAS9 - page 8
8 If using acidic decalcifying agents be sure to immediately re- move any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding pre- cautions. 3. Check before use 3.1 Checking mains voltage The machine is set for the correct voltage before leaving our factory. Ensure that your mains volta ...
-
Jura Capresso IMPRESSAS9 - page 9
9 Place a container under the coffee-spout (15) and press rinsing key . UNIT RINSING COFFEE READY 4.2 Cup illumination The cup illumination puts your coffee in a good light, making it a treat for the eyes. When you switch on the machine or press any key, the cup illumi- nation is activated for 3 minutes. To switch on the cup illuminati- ...
-
Jura Capresso IMPRESSAS9 - page 10
10 7. Use of Claris filter cartridges Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“. 7.1 Placing filter Pull up cartridge mounting. Pressing lightly, place the filte ...
-
Jura Capresso IMPRESSAS9 - page 11
11 UNIT RINSING COFFEE READY Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S. © ) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process. You can interrupt the flow of coffee at any time by simply pressing any of the coffee keys. To o ...
-
Jura Capresso IMPRESSAS9 - page 12
12 Place a cup under the steam/frothing nozzle (20) and immerse the frothing aid in the milk to be frothed or the liquid to be heated. Press steam portion draw-off key . STEAM PORTION You can stop the draw-off operation at any time by pressing the steam draw-off key . COFFEE READY 11. Frothing up milk with the Auto-Cappuccino S9 ...
-
Jura Capresso IMPRESSAS9 - page 13
13 For cappuccino turn the selector switch (1) (Fig. 10) to area (2) For hot milk turn the selector switch (1) (Fig. 10) to area (3) Now place the cup with the cappuccino froth or the hot milk under the coffee spout and draw of the product of your choice. 11.5 Cleaning the Professional-Cappuccino Frother The Professional-Cappuccino Frot ...
-
Jura Capresso IMPRESSAS9 - page 14
14 13.2 Programming coffee temperature TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key or . To store the new coffee temperature in memory briefly press key . TEMPERATURE COFFEE / SELECT KEY By pressing the button, you can select ...
-
Jura Capresso IMPRESSAS9 - page 15
15 Then press key briefly to store the water hardness level in memory. By pressing the button, you can select the next phase, or press the button in order to leave the programming. To determine the water hardness level please read chapter 6. “Adjusting for water hardness“. 13.8 Programming economy mode ECONOMY MODE OFF Press key ...
-
Jura Capresso IMPRESSAS9 - page 16
16 13.11 Programming automatic switch off time OFF AFTER 5.0 HOURS Press key By briefly pressing key or you can set the hours and then confirm by pressing key (0.5 to 9.0 hours). By pressing the button, you can select the next phase, or press the button in order to leave the programming. 13.12 Cup counter 200 SUPPLIED (TOTAL SUP ...
-
Jura Capresso IMPRESSAS9 - page 17
17 14.4 Fill beans FILL BEANS Fill beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose. 14.5 Removing foreign objects Switch off your machine b ...
-
Jura Capresso IMPRESSAS9 - page 18
18 14.10 Empty system This procedure is necessary to prevent your machine from frost damage while being transported. Put a container under the pivoting nozzle (20). Press selector key and remove water tank STEAM INTAKE PRESS STEAM / FILL SYSTEM Switch off machine by pressing ON/OFF key . 15. Cleaning The machine has an integrate ...
-
Jura Capresso IMPRESSAS9 - page 19
19 Open cover (3). Press key until you can hear an acoustic signal. EMPTY TRAY AGENT IN TANK Pour 0.6 litres of water into a container and completely dis- solve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank. AGENT IN TANK / OPEN TAP / PRESS CALC Place a sufficiently large container under t ...
-
Jura Capresso IMPRESSAS9 - page 20
20 19. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicator is stuck Remove tank, decalcify, rinse well, fill up with water and replace FILL BEANS Bean container is empty Top up with beans Message still displ ...
-
Jura Capresso IMPRESSAS9 - page 21
21 Cause Action CLEAN UNIT You have drawn off coffee 220 times or run Clean as described in chapter 14.6 the rinsing program 180 times Message still displayed, although machine Run cleaning program again; this time do not cleaned add cleaning tablet UNIT CALCED The espresso/coffee machine sector needs Run decalcifying program as described in decalc ...
-
Jura Capresso IMPRESSAS9 - page 22
22 Problem Cause Action Not enough froth while – Frothing nozzle blocked – Clean frothing nozzle frothing up milk – Clean the Professional-Cappuccino Frother – Clean the Professional-Cappuccino Frother as – described in chapter 11.5 If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch d ...
Hai una domanda su Jura Capresso IMPRESSAS9?
Utilizza il modulo sottostante
Se non hai risolto il problema con Jura Capresso IMPRESSAS9 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Jura Capresso IMPRESSAS9 è probabile che voglia condividere il modo di risolverlo.