-
Smeg WDF147S - page 1
WASHER-DRYER INSTRUCTION MANUAL EN ...
-
Smeg WDF147S - page 2
1 EN Contents 1. Precautions for safety and use 2 2. Installation instructions 5 3. Description of controls 8 4. Using the appliance for washing 9 5. Using the appliance for drying 17 6. Cleaning and maintenance 20 7. Troubleshooting 22 This appliance is tag ged in accordance with European Directive 2002/96/EC on W aste Electrical and Electronic Eq ...
-
Smeg WDF147S - page 3
E N 2 READ THE INSTRUCTIONS Attention! You are a dvise d to re ad all the instruct i ons in this m anual carefully; it w ill inform you about the right conditions for the proper, safe use of your washer-dryer It is very important to keep this instruction manual with the appliance for future reference. In the event of sale or tran sfer, ensure that ...
-
Smeg WDF147S - page 4
E N 3 same as th e values mar ked on the nameplate. The use of adapters or junctions is not recom - mended. Never disc onnect the plug b y pulling on the p ower supply lead. • The appliance is on ly disconnected from the electricity supply if the plug has been removed from the socket or the electrical sys tem master switch has b ee n turned o ff. ...
-
Smeg WDF147S - page 5
E N 4 • Items s uch as f oa m rubber (latex f oam), s how er caps, waterpro of textiles, r ubber backed articles and clothes or pil l ows fitted wit h foam rubber pads should not be dried i n the tumble dryer • Fabric softeners, or similar products, should be used as specified by the f abric s oftener instruc- tions. • The f inal p art of a t ...
-
Smeg WDF147S - page 6
E N 5 The manufacturer declines all responsibil ity for injury or damage caused by failure to comply with the above regulations or de rivi ng f ro m tampering with even just one part of the appliance and the use of non -original spa re parts. 2. INSTA LLAT ION INSTRUCTIONS Important! The appliance must be installed by a qualified en g ineer in comp ...
-
Smeg WDF147S - page 7
E N 6 2.2 POSITION ING AN D LEVELL ING 1. Place the applian ce in t he chosen position. 2. Level the app l iance carefully in all d irections with the aid of a spirit level, adjusting the height of the feet if necessary. Once done, fix the feet in place with t he locknuts pro- vided. 3. On appl i ances with adjustable rear feet , not e that the rea ...
-
Smeg WDF147S - page 8
E N 7 2.3 CONNEC TING TO T HE WAT ER SUPP LY 1. Check that the water supply pressure is in the following range: 0,05-0,9MPa . W ith higher pressures, use a pressure reducer. 2. Connect the cold water supply ho se ( blue screw c ollar) to t he cold water tap with ¾ gas threaded connector, taking care to tighten firmly to prevent leaks. The water su ...
-
Smeg WDF147S - page 9
E N 8 • Do not connection/disconnect the power supply plug from the socket with wet hands • Onl y disconnect the power suppl y plug from th e socket by taking hold of the plu g itself, never b y pulling on the lead. 3. DESCRIPTION OF CONTROL S 3.1 CONT ROL PAN EL All the appliance's control and monitoring devices are placed together on the ...
-
Smeg WDF147S - page 10
E N 9 4. USING THE A PPLI A NCE FOR WASHING 4.1 PREPA RING THE ITEMS FOR WA SHING 1. Subdivide the items for washing by fabric type and colour fastness. 2. Wash white and col o u red items separately. New c o loured items should be washed s e parately the first ti me. Normally, ite m s carry labels with washing instructions. The following is a shor ...
-
Smeg WDF147S - page 11
E N 10 4.4 LOAD ING THE ITEMS F OR WAS HING 1. Open the door and l o ad the laund ry , distributing i t evenly over the d r um , with items opened o ut and not bundled together; if possible, large and small items should be well mixed. 2. The washing m a c hine covered by this ma n u al can be loaded w ith up to 7 kg of laundry for each wash. I f th ...
-
Smeg WDF147S - page 12
E N 11 4.6 POWDER DE TER GENT DOSE S Laundry with normal dirt 1. Choose a programme without prewash. 2. Pour the to tal amount o f detergent show n on the pack into the main wash c ompartment of the d etergent dra- wer. Very dirty laundr y 1. Choose a programme with prewash. 2. Place ¼ of the recommended amount of d e tergent in the prew ash compa ...
-
Smeg WDF147S - page 13
E N 12 4.10 SWITC HING ON TH E APP LI A NCE AND SELEC TING THE WASHING PRO GRA M ME To switch on the appliance and select the programme, proceed as follows: 1. Turn the programmes knob in either direction. This switches on the washer-dryer. 2. Select the washing programme. The time l e f t to the end of the programme and the maximum recommended wei ...
-
Smeg WDF147S - page 14
E N 13 4.11 SELECT ING A ND CONFIRMING OPTI O NS 1. The Option Selection button can be used to select the following options in sequence (from the top down): Time to End : key can be p re ssed repeatedly to select the time after which the washin g programme will end. (See par.4.12) Prewash : adds a stage be f o r e the main wash, lasti n g about 20 ...
-
Smeg WDF147S - page 15
E N 14 4.12 TIME T O END 1. To select options “time to end”,press the “Option selection” bu tton, pres sing repeatedly the “Confirm op- tion” button options you can select when the wash c yc l e ends.. The t i me to end of cycle function ca l cu- lates the in i tial duration of the washin g/drying cycle, the setti ngs made (tempe ra t u ...
-
Smeg WDF147S - page 16
E N 15 4.14 INTE RRUPTING OR CHA NGING THE WASH I NG PR OG RA MME The washing programme in progress can be interrupted at any moment: 1. press the “Start/Pause” button for about 3 seconds: the displ ay shows the w o rd PAUS (for 1 second) al- ternating with the time remaining until the end of the c yc l e (for 1 second). The Start /Pa use lig h ...
-
Smeg WDF147S - page 17
E N 16 4.17 OPENING THE A P PL IANCE IN A N EMERG EN CY In the event of a power fai lure, th e door i s opened using the mechanical release device activated by means of the lever in the bottom of the appliance: • Turn th e knob to Off and d isconnect t he power supply plug from the socket. • Drain off the water (see point 6.4) • Pull the leve ...
-
Smeg WDF147S - page 18
E N 17 5. USING THE A PPLI A NCE FOR DRYING 5.1 GENERA L During drying cycles, the water tap must be turned on and the drain hose correctly positio ne d. This appliance can be set to perform wash only, dry only and wash-and-dry programmes. In the wash-and-dry programme, the appliance switches from washing to drying automatically, with no need to us ...
-
Smeg WDF147S - page 19
E N 18 5.2 WAS H-AND-DR Y PROGRAMME Automatic washin g and d ryin g can be carried out in the tough fab ri cs (cotton and colours) and synthetic/delicate fabrics programmes. If the wool wash programmes are selected, automatic drying after the w as h cannot be set. For automatic w as hing and dr yin g, the load of laundr y must not exceed 4 kg of co ...
-
Smeg WDF147S - page 20
E N 19 5.3 DISPLA Y MESS A GES IN RESPONSE T O INA P PR O PR IATE LOA D S LO Load too low – the programme stops after about 35 minutes to avoid damaging the laundry HI Load too high – th e programme goes ahead with the drying cycle, with the following maximum times: Normal drying programme (duration in h:mm) Delicate drying programme (duration ...
-
Smeg WDF147S - page 21
E N 20 6. CLEAN I NG A ND M A INTENANCE Important – Before carr y ing out an y cleani ng or maintenance procedure, the plug must be disconnected from the power supply socket. 6.1 CLEA NING THE OU TSIDE OF THE A PPLIANCE • Regular, thorough cleaning will keep your appliance looking good. • Clean the exterior of the appliance with soap and wate ...
-
Smeg WDF147S - page 22
E N 21 3. Extract the drain hose ”A”. W a rning: if the hose is hot, the water is hot o r boiling hot. Place a shallow container on the floor and remove the plug “B” to drain off the water. Depending on the amou nt of water in the a ppliance, the contai n er may have to be emptied several times. W h en no more water is c omin g out, cl o se ...
-
Smeg WDF147S - page 23
E N 22 7. TROUBLESH OOTING This produce complies with the relevant regulations governing the safety of e lectrica l equipment. For safety rea- sons, any technical inspections or repairs must be performed by qualified staff, to prevent all hazards for the user. If the appliance does not work, before calling the After-Sales Service, to avoid unnecess ...
-
Smeg WDF147S - page 24
E N 23 11 A pp liance does not spin Anti-imbalance s af ety device tripped because laundry no t evenl y dis tri b- uted in drum. If l aundry is still wet a t end of cycle, rea rr an ge it in the drum by hand and repeat spin programme only. 12 Empty ing water from drum In the event of a power blackout or appliance failure, the water can be removed f ...
-
Smeg WDF147S - page 25
PROGRAM GUIDE Programs Temp. (°C) Max. Spin (rpm) Max. washing load (kg) Max. drying load (kg) Prewash Wash Softner Prewash Intensive Easy Iron Extra rinse Flexi time Drying after wash if selected Wash program description Cotton Delicate coloureds with light dirt / 30° Max 7 4 Normal Cold wash or at 30°C, rinses a ...
Hai una domanda su Smeg WDF147S?
Utilizza il modulo sottostante
Se non hai risolto il problema con Smeg WDF147S con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Smeg WDF147S è probabile che voglia condividere il modo di risolverlo.