Italiano dropdown-ico

Manuale per l’uso HP (Hewlett-Packard) HP Kayak XM600

41 pagine 3.06 mb
Scarica

Vai alla pagina of 41

Summary
  • HP (Hewlett-Packard) HP Kayak XM600 - page 1

    Installing and Replacing Hardware Parts in Y our PC Wo rkstatio n This chapter provides information about installing accessories and replacing hardware parts in your PC Workstation . Contact your dealer for an up-to-date l ist of suppo rted devices or che ck the HP web si te: http://www .hp.com/go/kayak . HP UltraFlow Airflow Guid e Front Access Dr ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 2

    Installing and Replacing Hardware Par ts in Your PC Workstation 2 HP Kayak XM600 PC Workstati on Syste m Board HP Kayak XU800 PC Wor kstat ion System Board Up to six accessory cards can be installed: - One Universal AGP PRO (graphics) - Five 32-bit PCI sl ots Support for one or two processors Floppy Disk Drive Connector Primary IDE Connector Second ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 3

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing a nd Replacing the Cover a nd Front Bezel 3 Removing and Rep lacing the Cover and Front Bezel Removin g the Cove r For yo ur own safe ty , it is r ecommende d that you first r ead the w arning notices on in the Introductory Sect ion. 1 Switch off the display and computer. Disc ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 4

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep l acing t he Cover and F ront Bezel 4 NOTE Take care when removing t he upper an d lower beze ls. They are n ot on a hinge , so do not force them open. To remove the upper and lower bezels: a Unclip the two clips located on the left-hand side of the bezel. b Open the b ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 5

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing and Replacing the Airflow Guide 5 Removing and Rep lacing the Airfl ow Guide Removin g the HP UltraFlow Airflow Guide 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables. 2 Remov e the PC Workstation’s cover (re ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 6

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep l acing a P rocessor 6 Removing and Re placing a Processor Single-processor sy stems can be upgraded to dual-proce ssor systems by installing a second processor in the vacant processor slot. The second processor must be of the same t ype, speed and level-2 cache memory ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 7

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing and Repla c ing a Processor 7 Installing a Proce s sor 1 Ensure that the edges of the processor are lined-up with the processor connec tor gu ide rail s alon g the r etentio n mechan ism. 2 Place one h and on the processor’s heatsink and push down onto the processor connecto ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 8

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing, Replacing a nd Upgrading Memory on HP Kaya k XM600 Models Shipped with SDRAM 8 Removing, Replaci ng and Upgrading Memory on HP Kayak XM600 Model s Shipped with S DRAM Upgrad ing SDRAM Memory SDRAM models of th e HP Kayak XM600 are supplied w ith a Memo ry Expansion Card suppo ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 9

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on HP Kayak XM600 Models Shipped with SDRAM 9 5 To install a module , ensure that t he two notches of the memory module are align ed with those of th e soc ket. Wi th the two reta ining clips op en, press th e memory module completely into the s ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 10

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing, Replacing a nd Upgrading Memory on HP Kaya k XM600 Models Shipped with SDRAM 10 6 Relea se t he reta ining scr ew lo cate d on the Memory Expansi on Card. Then remove the s cr ew from accessory card slot. 7 Open the two retai ning clips on the system bo ard to release the Mem ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 11

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing, Re placing and Upgrading Memory on HP Kayak XM600 Models Shipped wi th RDRAM 11 Removing, Replacin g and Upgrading Memory on HP Kayak XM600 Models Shipped w ith RDRAM Upgrad ing RDR AM Memor y RDRAM mod e ls of the HP Kay ak XM600 PC Workstation su pport one or two RAMBUS Dir ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 12

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing, Replacing a nd Upgrading Memory on HP Kaya k XM600 Models Shipped with RDRAM 12 8 Check the HP Summary Screen to ve rify the new c onfiguration (refer to “Viewing th e HP Summary S creen” i n the Se ction on “Set ting Up an d Usin g Your PC Works tation”) . Chapter2.f ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 13

    Installing and Replacing Hardw are Parts in Your PC Workstation Memory Upgrades on the HP Kayak XU800 13 Memory Upgrades on the HP Kayak XU800 There i s a si ngle M emory Exp ansion Card connector on the system board that supports a Memory Expan sion Car d install ed with e ither RIM M or DIMM sockets . NOT E D o not i nstall a me mory mo dule dire ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 14

    Installing and Replacing Hardware Par ts in Your PC Workstation Memory Upgrades on t he HP Kay ak XU800 14 • Four DIMM sockets. Each socket hosts SD RAM 100 MHz non-EC C memory modules that are used in pairs. The first two DIMM sockets A0-B0, closest to the system board, contain the first pair of memory modules. Upgrades are then installed in DIM ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 15

    Installing and Replacing Hardw are Parts in Your PC Workstation Memory Upgrades on the HP Kayak XU800 15 8 Remove memory modu les and any continuity modules f rom the old Memory Expansion Card, then install them in the same positions on the new Memory Expansion Card. Replacing t he Memory Expansion Card 1 Install the Memory Expansion Card so that t ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 16

    Installing and Replacing Hardware Par ts in Your PC Workstation Memory Upgrades on t he HP Kay ak XU800 16 Installing or Replacin g a Memory Module 1 Switch off the display and PC Workstation. Disco nnect all power cables and any LAN or te lecommunications cables. 2 Remove the PC Workstation’s cover (refer to page 3 ). 3 Remo ve t he HP Ul traFlo ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 17

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing and Re placing a PCI Accessory Card 17 Removing and Rep lacing a PCI Accessory Card To remove or install an accessory card, complete t he following steps: 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables. 2 Rem ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 18

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep lacing a PCI Accessory C ard 18 The following table shows the various P CI card in stallations fo r the different PCI slots on t he HP K ayak X U800: Universal AGP PRO slot (Kayak XM600 and Ka yak XU800) PCI Card 5 V 3.3 V Univers al (3.3 V or 5 V comp a tible) PCI Slo ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 19

    Installing and Replacing Hardw are Parts in Your PC Workstation Installing Mass Storage Device s 19 Installing Mass Storage Devices The PC has an integrated Ultra ATA-66 controller t hat supports up to four IDE devices. Removable media IDE devices, such as CD-ROM drives, DVD drives, tape drives and Zip drives, require front access. In addition to t ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 20

    Installing and Replacing Hardware Par ts in Your PC Workstation Installing Mass Storage Devices 20 • The ATA IDE cable supports two IDE devices. This cable is connected to the Primary IDE co nnector on the sy stem board. The bootable hard disk drive is conn ected to this cable via th e MASTER conne ctor. A second har d disk drive c ould b e insta ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 21

    Installing and Replacing Hardw are Parts in Your PC Workstation Installing Mass Storage Device s 21 HP Kayak X U800 Cable s and Co nnecto rs Which SCSI Con necto rs to Us e There is an internal SCSI connector on the system board that enables you to co nnect up to five inter nal S CSI devi ces. Th e l ast c onnector on the SCSI cable is conne cted t ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 22

    Installing and Replacing Hardware Par ts in Your PC Workstation Installing Mass Storage Devices 22 You shoul d assign an unuse d SCSI ID to the second SC SI hard disk drive (for exampl e, SCSI ID 1). The SCS I ID is usua lly confi g ured wit h jumpe rs on the SCSI hard disk drive. Refer to the installatio n guide supp lied with the dri ve for info ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 23

    Installing and Replacing Hardw are Parts in Your PC Workstation Removing and R e placing the Primary Ha r d Disk Drive 23 Removing and Rep lacing the Primary Hard Disk Dr ive CAUTION Handle the hard disk drive with c are. A void shocks and violent movement as this can cau se damage to the h ard disk drive’ s internal components. Make sure that yo ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 24

    Installing and Replacing Hardware Par ts in Your PC Workstation Removing and Rep lacing the Primar y Hard Disk Drive 24 CAUT ION Config ure th e new hard disk dri ve with the same s ett ings as th e old o ne. Installing the New Drive 1 Add th e short blue guid e rai ls to t he new har d disk dr ive. Insert th e gui de rail labeled “L” on the le ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 25

    Installing and Replacing Hardw are Parts in Your PC Workstation Installing a Second Hard Disk Dr ive in an Internal Shelf 25 Installing a Secon d Hard Disk Drive in an Internal Sh elf The internal shelves can support two 3.5-inch devices. The ma ster hard disk drive must be installed in the top shelf when using an ID E configurat ion. To install a ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 26

    Installing and Replacing Hardware Par ts in Your PC Workstation Installing an Accessory in the Front Access Cage 26 Installing an Accessory i n the Front Access Cage 1 Switch off the display and PC Workstation. Disco nnect all power cables and any LAN or te lecommunications cables. 2 Remove the PC Workstation’s cover and front upper bezel (refer ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 27

    Installing and Replacing Hardw are Parts in Your PC Workstation Installing an Accessor y in the Front Access Cage 27 5 Alig n the gu ide rail s on bo th sides of the drive with th e inter nal shel f guide s and th en sl ide the drive u ntil i t clicks i nto p ositio n. 6 Connect the po wer and data cables to the installed device. The connectors are ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 28

    Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the CD-ROM Drive (or DVD-Drive) 28 Replacing the CD-ROM Drive (or DVD-Drive) Removin g the Old Drive 1 Switch off the display and PC Workstation. Disco nnect all power cables and any LAN or te lecommunications cables. 2 Remove the PC Workstation’s cover and front upper beze ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 29

    Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Floppy Disk Drive 29 Replacing the Flop py Disk Drive Removin g the Floppy Disk Drive 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables. 2 Remov e the PC Workstation’s cover and front upper bezel (refer t ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 30

    Installing and Replacing Hardware Par ts in Your PC Workstation Completing the I nstallation of a Mass Storage Device 30 Completing the Installation of a Mass Storag e Device When an IDE Drive Is Installed 1 Switch on th e computer. 2 If an error message appears, follow th e instruction s provided b y the Error Message Utility . 3 To verif y the co ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 31

    Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Power Supply Unit 31 Replacing th e Power Supply U nit WARN ING Hewlett-Pa ckard do es not support power supply upgrades. This informat ion is p rovided to help you replace a defec tive power su pply unit. F or your safety, only r eplace with a power supply unit provided ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 32

    Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the Power S upply Unit 32 Installing the Power Supply Un it 1 Insert the new po wer supply uni t. 2 Secure it in p osition using th e three screws th at you removed in steps 6 and 7. 3 Reconn ect all in ternal power supply con nectors. 4 Repla ce the H P Ultra Flow Airflow Gu ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 33

    Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the System Boa rd 33 Replacing the System Board Removin g the System B o ard 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables. 2 Remove the PC Workstati on’s cover (refer to p age 3 for instructions). 3 Remo ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 34

    Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the System Bo ard 34 Installing the New System Board 1 Clip the retai ning brac ket onto th e new system board. 2 Lower the system board onto the guide p ins ensuring that all hooks are correctly positi oned. Check t hat the rear conne ctors are aligne d correctly wi th their ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 35

    Installing and Replacing Hardw are Parts in Your PC Workstation Rep lac ing t he Re ar Fa n 35 Replacing the Rear Fan Removin g the Rear Fan 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables. 2 Remove the PC Workstati on’s cover (refer to p age 3 for instructions). 3 Remo ve t he H ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 36

    Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the Rear Fan 36 Replac ing the Rear Fan 1 The rear fan ca n only b e inst alled in one way. From the re ar of t he PC Workstation, the two retaining clips should be positioned on the same side as the chassis edge. 2 Connect the rear fan cable to its connector on the system bo ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 37

    Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Fan and S peaker Assembly 37 Replacing the Fan an d Speaker Assembl y Removin g the Fan and Speaker Assembly 1 Switch off the display and PC Workstation. Disconne ct all power cables and any LAN or tele communications cables. 2 Remove the PC Workstati on’s cover and fro ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 38

    Installing and Replacing Hardware Par ts in Your PC Workstation Replacing the Fan and Speaker Assembly 38 Replac ing the Fan and Speaker Assembly 1 Place the fan and speaker assembly behind the int ernal shelves (the speaker should be near the bottom edge of the chassis and facing towards the front of the PC W orkstation). Ensure all cables are cle ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 39

    Installing and Replacing Hardw are Parts in Your PC Workstation Sys tem Boar d S witc he s 39 System Board Switches HP Kayak XM600 PC Workstation There are te n system board swi t ches used for configurat ion, numbered from 1 to 10. Of these a certain number are res erved and should n ot be modifie d, otherw ise it coul d lead to a s ystem f ailur ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 40

    Installing and Replacing Hardware Par ts in Your PC Workstation Syst em Board Swi tch es 40 HP Kayak XU800 PC Workstat ion There are te n system board switches use d for configur ation, nu mbered from 1 to 10. Of these a certain number are reserved and should not be modified , oth erwise it could lead to a s ystem fa ilure. NOTE Switches can also b ...

  • HP (Hewlett-Packard) HP Kayak XM600 - page 41

    Installing and Replacing Hardw are Parts in Your PC Workstation Replacing the Ba ttery 41 Replacing the Battery WARN ING There is a dang er of explo sion if the batt ery is incorrectly in stalled. For your safety, n ever attempt to recha rge, disassemble, o r burn the o ld battery. Replace the battery only with the same or equi valent type recomm e ...

Fabbricante HP (Hewlett-Packard) Categoria Tablet Accessory

I documenti che otteniamo dal fabbricante del dispositivoHP (Hewlett-Packard) HP Kayak XM600 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici HP (Hewlett-Packard)
- manuali per l’uso HP Kayak XM600
- schede prodotto HP (Hewlett-Packard)
- opuscoli
- o etichette energetiche HP (Hewlett-Packard) HP Kayak XM600
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso HP (Hewlett-Packard) HP Kayak XM600.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione HP (Hewlett-Packard) HP Kayak XM600, manuali di manutenzione, brevi manuali o manuali utente HP (Hewlett-Packard) HP Kayak XM600. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto HP (Hewlett-Packard) HP Kayak XM600.

Manuali per l’uso simili

Manuale completo del dispositivo HP (Hewlett-Packard) HP Kayak XM600, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare HP (Hewlett-Packard) HP Kayak XM600 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti HP (Hewlett-Packard) HP Kayak XM600.

Il manuale per l’uso completo HP (Hewlett-Packard), dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale HP (Hewlett-Packard) HP Kayak XM600 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice HP (Hewlett-Packard) HP Kayak XM600, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per HP (Hewlett-Packard) HP Kayak XM600 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo HP (Hewlett-Packard) HP Kayak XM600 - che ci dovrebbe aiutare nei primi passi durante l'uso HP (Hewlett-Packard) HP Kayak XM600
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del HP (Hewlett-Packard) HP Kayak XM600
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio HP (Hewlett-Packard) HP Kayak XM600 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su HP (Hewlett-Packard) HP Kayak XM600?

Utilizza il modulo sottostante

Se non hai risolto il problema con HP (Hewlett-Packard) HP Kayak XM600 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con HP (Hewlett-Packard) HP Kayak XM600 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)