-
EdgeStar IB450SS - page 1
IB450SS Clear Ice Maker Owner ’ s Manual This owner ’ s manual provides instructions on safe installation, use, and maintenance. ...
-
EdgeStar IB450SS - page 2
User ’ s Manual Clear Ice Maker Installation onl y b y a licensed p lumber . Be sure to stand the ice maker upright for at least 24 hours prior to plugging it in. 2 ...
-
EdgeStar IB450SS - page 3
Thank you for purchasing this EdgeS tar produc t. W e are glad you chose us. W e believe that your purchase of this product opens a relationship be tween you and EdgeS tar . W e will provide the customer support needed to nurture that relationship. This manual contains important informati on regarding the proper installation, use and maintenance of ...
-
EdgeStar IB450SS - page 4
T ABLE OF CONTENTS Page ICE MAKER SAFETY………………………………………………………………… 5 IMPOR T ANT SAFEGUARDS………………………………………………………. . 6-7 TECHNICAL INFORM A TION…………………………………………………………..7 COMPONENT LOCA TIONS ……………………? ...
-
EdgeStar IB450SS - page 5
ICE MAKER SAFETY Y our safety and the safety of others ar e very important . W e have provided many im portant safety messa ges in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert sym bol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will f ...
-
EdgeStar IB450SS - page 6
IMPOR T ANT SAFEGUARDS Before the ice maker is used, it m ust be properly positioned and installed as described in this manual, so read the manual carefully . T o reduce the risk of fire, electrical shock or injury wh en using the ice maker , follow basic precautions, including the following: z Plug into properly grounded outlet, do not use an adap ...
-
EdgeStar IB450SS - page 7
first batch of cubes must be discarded. z Never turn the water supply tap of f when the ice maker is working. z If the ice maker will not be used for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instru ctions provided for cleaning or use of sanitizing solution. Do not leave any solu tion inside the ice maker ...
-
EdgeStar IB450SS - page 8
Note on ice storage This type of icemaker produces crystal-clear , gourmet cube ice. An insulated ice sto rage bin is built into each the icemaker . The ice bin will fill with ice and the ice maker will automatically shut of f. Then the ice in the b i n will slowly melt and go out the drain. Once enough of the ice has melted, th e ice maker will au ...
-
EdgeStar IB450SS - page 9
I c e s c o o p Figure 1 Power supply Control panel W ater inlet Ice scoop Drain hose ICE MAKER INST ALLA TION Unpacking Excessive W eight Hazard Use two or more people to move and install icem aker . Failure to do so can result in back or other in j ur y . Remove packaging materials IMPOR T ANT : Do not remove any permanent instruction labels or t ...
-
EdgeStar IB450SS - page 10
z T o remove any remaining tape or glue, rub the area briskly with your thumb. T ape or glue residue can also be eas ily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers . W ipe with warm water and dry . z Do not use sharp instruments, rubbing alcohol, flamm able fluids, or abrasive cleaners to remove tape o ...
-
EdgeStar IB450SS - page 11
The ambient operational temperature should be between 50 ℉ and 100 ℉ . The operating water temperature should be between 41 ℉ and 90 ℉ . Operation outside these temperatures may result in lowered production or other adverse ef fects. • In general, it is always a good idea to filter the water. A wa ter filter can rem ove taste and odors as ...
-
EdgeStar IB450SS - page 12
Before you move your icemaker into its final location, it is im portant to make sure you have the proper electrical connection: A standard electrical supply (1 15 V , 60Hz.), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required. It is recommended that a separate circuit, serving only your ice ...
-
EdgeStar IB450SS - page 13
To remove door from hinges: 1. Using a Phillips screwdriver, remove the sc rew s and take off top hinge. Keep the parts together and set them aside. 3. Lift door off bottom hinge and turn it ups ide down so that the handle is on the right. Set door aside. To replace door on hinges: 1. Using a flathead screwdriver, remove the plug buttons from the s ...
-
EdgeStar IB450SS - page 14
IMPOR T ANT : 1. All installations must be in accor dance with local plumbing code requir ements. 2. Make certain that the pipes ar e not pinched or kinked or damaged during installation. 3. Check for leaks after connection. T ools required: ½ in. open-end wrench, Phillips screwdriver Connecting the water line: 1. Turn off main water supply. Turn ...
-
EdgeStar IB450SS - page 15
provided you have access to a water supply and a drain. Y ou must follow the stated instructions for a- Electrical requirements b- W ater supply and drain c- Leveling the icemaker . Recessed inst allation: A recessed installation will allow you to install the ice maker under a counter , or in a kitchen cabinet provided the required clearan ce space ...
-
EdgeStar IB450SS - page 16
11. Have you checked for leaks at all wate r supply connections- and at the drain? Operating Method 1. Turn on the water tap, let the water tr ough fill, then switch the ICE/OFF/WASH switch on the front panel to the ICE pos ition. The ice maker will s tart working automatically. 2. After three minutes, the m achine will auto matically go to the ice ...
-
EdgeStar IB450SS - page 17
There are two distinct cycles : freeze and harvest. During the freeze cycle, water flows to the evap orator surface. In the harv est cycle, the ice is released and water enters the machine. A complete cycle can take 15 to 40 m inutes, depending on temperature and operating conditions. Freeze : During the freez e cycle the compressor is pumping re f ...
-
EdgeStar IB450SS - page 18
z W ater running from the evaporator to th e water bin may make a splashing sound. z As each cycle ends, you may hear a gur gling sound due to the refrigerant flowing in your icemaker . z Y ou may hear air being forced over the condenser by the condenser fan. z During the harvest cycle, you may hear the of ice cubes falling into the ice storing bin ...
-
EdgeStar IB450SS - page 19
There are 5 things to keep clean: 1. The exterior . 2. The interior . 3. The condenser 4. W ater distribution tube 5. The ice-making system Exterior Cleaning The door and cabinet may be cleaned with a m ild detergent and warm water solution such as 1 oz of dishwashing liquid mixed with 2 gallons of warm water. Do not use solvent based or abrasive c ...
-
EdgeStar IB450SS - page 20
Condenser Cleaning A dirty or clogged condenser prevents proper airflow , reduces ice making capacity , and causes higher than recommended operating te mperatures that may lead to com ponent failure. Have the condenser cleaned at least once every six months. 1. Unplug the ice maker or disconnect power . 2. Remove the 2 screws at the bottom of the f ...
-
EdgeStar IB450SS - page 21
Minerals that are removed fr om water during the freezing cy cle will eventually form a hard scaly deposit in the water system. Clean ing the system regularly helps remove the mineral scale buildup. How often you need to clean the system depends upon how hard your water is or how effectiv e you r filtration may be . W ith hard water of 15 to 20 gra ...
-
EdgeStar IB450SS - page 22
Descriptions of LEDs and buttons: 1. Ice Full (Red) LED: Ice Full indicator light. When this LED is lit, the ice storage bin is full of ice or there is something obstructing the ice-full probe. The unit will stop working. When ice cubes are taken out of the ice storage bin, clearing the ice-fu ll prob e, th e red LED will keep flashing for 3 minute ...
-
EdgeStar IB450SS - page 23
and the ice size will be smaller in the next cycle. IMPORTANT: • It is not recommended that the ice size be adjusted unnecessa rily s ince this could damage the machine’s controls . • Do not let water contact the control box. Major Functions 1. Completely automatic operation. 2. When the ice storage bin is full, the m ach ine stops making ice ...
-
EdgeStar IB450SS - page 24
Problem Possible Cause Probable Corr ection The icemaker is unplug ged. Plug the ice maker in. The fuse is blown. Replace fuse. The icemaker power switch is OFF . T urn the ice maker power switch to ICE (ON) The machine won't operate. The ice storage bin is full of ice. T ake away some ice cubes; make the ice-full probe is free of ice. The wat ...
-
EdgeStar IB450SS - page 25
LIMITED W ARRANTY This EdgeS tar product is warranted to be fr ee from defective workmanship and materials for the first year following the date of origin al purchase. Replacement parts will be supplied free of char ge for the first year following th e date of original pu rchase. Labor will be performed free of charge for the first 90 days followin ...
-
EdgeStar IB450SS - page 26
Once an EdgeS tar authorized representative ha s confirmed that your product is eligible for warranty service, the product must be retu rned to our EdgeS tar repair facility . The purchaser is solely responsible for prepayin g all shipping related costs to and from the repair facility . EdgeStar is not responsible for damage resulting from shipper ...
-
EdgeStar IB450SS - page 27
For product guides, additional t roubleshooting resources, and up to date information, visit us on the web at: http://www .edgest ar .com EdgeS tar Products Box 81336 Austin, TX 78708-1336 T oll Free: 1-866-319-5473 27 ...
Hai una domanda su EdgeStar IB450SS?
Utilizza il modulo sottostante
Se non hai risolto il problema con EdgeStar IB450SS con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con EdgeStar IB450SS è probabile che voglia condividere il modo di risolverlo.