Italiano dropdown-ico

Manuale per l’uso Kenwood KDC-X7006

40 pagine 0.98 mb
Scarica

Vai alla pagina of 40

Summary
  • Kenwood KDC-X7006 - page 1

    CD-RECEIVER KDC-X7006U KDC-X7006 INSTR UCTION MANU AL © B64-3627-00/00 (MW) B64-3627-00_00.Indd 1 B64-3627-00_00.Indd 1 07.1.10 3:50:06 PM 07.1.10 3:50:06 PM ...

  • Kenwood KDC-X7006 - page 2

    2 | English Con tents Safety precautions 3 Notes 4 General featur es 6 Pow er Selecting the Source Volume Attenuator Audio Control Adjusting the detail of Audio Contr ol Audio Setup Speaker Setting Subwoofer Output TEL Mute F unction Control mode Display T ype Selection Status Setting Graphic Display Selection T ext Display Selection—Display T yp ...

  • Kenwood KDC-X7006 - page 3

    English | 3 Safety precautions 2 W ARNING T o prev ent injury or fire, take the follo wing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your ey es on the unit ’ s display when you are driving for an y extended period. • Mounting and ...

  • Kenwood KDC-X7006 - page 4

    4 | English • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters conforming to ISO 8859-1 character set can be displayed. • There ar e places in this manual where ...

  • Kenwood KDC-X7006 - page 5

    English | 5 An online manual about audio files is put on the site, ww w .kenw ood.com/audiofile/ . On this online manual, detailed information and notes which ar e not written in this manual are provided . Mak e sure to read through the online manual as well. ⁄ • In this manual, the word "USB device" is used for flash memories and dig ...

  • Kenwood KDC-X7006 - page 6

    6 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 25) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. Selecting the S ource There are two types of sourc e selection met ...

  • Kenwood KDC-X7006 - page 7

    English | 7 V olume Increasing V olume T urn the [ VOL] knob clockwise. Decreasing V olume T urn the [ VOL] knob counterclockwise. Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF . When the Attenuator is ON, the " A T T" indicator blinks. Audio C o ...

  • Kenwood KDC-X7006 - page 8

    8 | English General fea tures Adjusting the detail of A udio Contr ol Among the Basic Audio items, y ou can adjust the Bass level, Middle level, and Treble lev el in detail. 1 Select the Basic Audio item Select the desired item to be set in detail from followings; • Bass level • Middle level • T reble level F or how to select Basic Audio item ...

  • Kenwood KDC-X7006 - page 9

    English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY " display . Refer to <Selecting the Source> (page 6). 2 Enter Speaker Setting mode Press the [VOL] knob. "SP SEL " is displayed. 3 Select the Speaker typ ...

  • Kenwood KDC-X7006 - page 10

    10 | English General fea tures F unc tion Con trol mode T o set up various func tions of this unit, select tree- structured function items. 1 Enter Function Con trol mode Press the [FNC] button. 2 Select your desired setup item Select a setup item using the Control knob. Operation type Operation Movement between items T urn the Control knob . Selec ...

  • Kenwood KDC-X7006 - page 11

    English | 11 Display T ype A/ Display T ype B Status Setting Determine whether the On and Off statuses of various functions are to be displayed on the Display T ype A/B. 1 Enter Status Setting mode Using the Contr ol knob, select "DISP" > "ST A TUS" . F or the operation method, refer to <F unc tion Control mode> (page 1 ...

  • Kenwood KDC-X7006 - page 12

    12 | English General fea tures T ext Display Selection — Display T ype C&D— Changing the text display . 1 Enter T ext Display Selection mode Using the Contr ol knob, select "DISP" > "TEXT " . F or the operation method, refer to <F unc tion Control mode> (page 10). 2 Select the text display part Push the Contr ol ...

  • Kenwood KDC-X7006 - page 13

    English | 13 The te x t display In T uner source Information Display Condition Station name "SNPS" 34 Fr equency "Fr equency" 34 Spectrum Analyzer & Clock * 1 "Speana/Clock" 456 Clock * 1 "Clock" 37 Clock * 2 "Clock" 34567 Date "Date" 3456 7 Blank "Blank" 567 In CD & Exte ...

  • Kenwood KDC-X7006 - page 14

    14 | English General fea tures Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to attach a title to ⁄ • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Using the Contr ol knob, select "MENU" . F or the operation method, refer to <F unc tion Con ...

  • Kenwood KDC-X7006 - page 15

    English | 15 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the facepla te to left side pull it to forward and remov e it. ¤ • The faceplate is a precision piece of equipment and can be damaged ...

  • Kenwood KDC-X7006 - page 16

    16 | English T uner/T V control f eatures T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . Refer to <Selecting the Source> (page 6). 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and ...

  • Kenwood KDC-X7006 - page 17

    English | 17 Station Pr eset Memor y Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequenc y to put in the memory Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Enter Preset Memory mode Using the Contr ol knob, select "P .MEM" . F or the operation method, refer to <F u ...

  • Kenwood KDC-X7006 - page 18

    18 | English T uner/T V control f eatures F unction of LX BUS T elevision TV T uning Selecting the TV channel of a connected LX BUS T elevision (optional accessor y). The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details. 1 Select TV source Press the [SRC] button. ...

  • Kenwood KDC-X7006 - page 19

    English | 19 CD/USB device/A udio file/External disc control f eatures SRC FNC SRC S.MODE SCAN REP RDM/ A.RDM M.RDM  E Control knob IN indicator Play time Release button Function icon File number Folder number Playing CD & A udio file When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 Insert a disc. 3 Push t ...

  • Kenwood KDC-X7006 - page 20

    20 | English CD/USB device/A udio file/External disc control f eatures F unction of KDC-X7006U Playing USB (iP od) device When the USB devic e is not connected C onnect the USB device Playback of the file contained in the USB device starts. When the USB devic e is connected Select USB source Press the [SRC] button. Select the "USB" (or &q ...

  • Kenwood KDC-X7006 - page 21

    English | 21 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Refer to <Selecting the Source> (page 6). Display examples: Display Disc player "CD Changer" CD changer "MD Changer" MD changer Pause an ...

  • Kenwood KDC-X7006 - page 22

    22 | English CD/USB device/A udio file/External disc control f eatures Play function of CD and Audio file Setting up the Repeat Play and Scan Play 1 Set up the play function Using the Contr ol knob, set your desired setup item to On/Off . F or the operation method, refer to <F unc tion Control mode> (page 10). When the play function is turned ...

  • Kenwood KDC-X7006 - page 23

    English | 23 T ext/Title Scroll Scrolling the displayed CD text, A udio file text, or MD title. Push the Contr ol knob toward up for at least 2 seconds. ⁄ • When the <Display Illumination Control> (page 27) is set to OFF , the display may black out while scrolling. B64-3627-00_00.Indd 23 B64-3627-00_00.Indd 23 07.1.10 3:50:15 PM 07.1.10 3 ...

  • Kenwood KDC-X7006 - page 24

    24 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Using the Contr ol knob, select "MENU" . F or the operation method, refer to ...

  • Kenwood KDC-X7006 - page 25

    English | 25 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle. Indication of this Security Code activation prevents your pr ecious audio un ...

  • Kenwood KDC-X7006 - page 26

    26 | English Menu system In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode T urn the Control knob . Select the "Clock Adjust" display . 2 Enter Clock Adjust mode Press the C ontrol knob for at least 1 second. The clock display blinks. 3 Selecting the item (hours or minutes) to adjust Push the Contr ol knob towards rig ...

  • Kenwood KDC-X7006 - page 27

    English | 27 In Standby mode DSI (Disabled Sy stem Indicator) A red indicator will blink on the unit after the faceplate is remov ed, warning potential thieves. Display Setting "DSI : ON" LED flashes. "DSI : OFF" LED OFF . Display Illumination C ontrol This function turns off the display when you perform no operation for 5 secon ...

  • Kenwood KDC-X7006 - page 28

    28 | English Menu system When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 Select AMP Control mode T urn the Control knob . Select the " AMP Contr ol" display. 2 Enter AMP Contr ol mode Press the C ontrol knob for at least 1 second. 3 Select the AMP Control item for adjustment Push the Contr ol ...

  • Kenwood KDC-X7006 - page 29

    English | 29 Auxiliary Input Display Setting & Station/Disc Naming Selecting the display when changing to Auxiliary input source. F or the Station/Disc Naming ref er to the <Station/Disc Naming (SNPS/DNPS)> (page 14). 1 Select Auxiliar y input source Press the [SRC] button. Select the " A UX"/" AUX EXT" display . Refer ...

  • Kenwood KDC-X7006 - page 30

    30 | English Menu system Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 30). 1 Select the source Press the [SRC] button. Refer to <Selecting the Source> (page 6). 2 Enter Menu mode Using the Contr ol knob, select "MENU" . F or the operation method, refer to < ...

  • Kenwood KDC-X7006 - page 31

    English | 31 Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case . 2 W ARNING • Store unuse ...

  • Kenwood KDC-X7006 - page 32

    32 | English Basic Operations of r emote contr ol Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 7) for the operation method, such as the procedures f or Audio control and others operations. • The remote control can only select and adjust the ...

  • Kenwood KDC-X7006 - page 33

    English | 33 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........2 6 ..........1 7 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Mak e the proper input and output wire connections for each unit. ...

  • Kenwood KDC-X7006 - page 34

    34 | English Connecting W ires to T erminals P .CONT ILLUMI ANT . CONT MUTE EXT . CONT FRONT L FRONT R REAR L REAR R – + SUB WOOFER REAR FRONT REMO.CONT FM/AM antenna input Fr ont left output ( White) Fr ont right output (Red) F use (10A) Wiring harness (Accessory 1 ) White/Black Gray/Black Green/Black Purple/Black White Gray Green Purple T o fro ...

  • Kenwood KDC-X7006 - page 35

    English | 35 Installation non-Japanese cars Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed secure ...

  • Kenwood KDC-X7006 - page 36

    36 | English Installation Removing the hard rubber fr ame 1 Engage the catch pins on the removal t ool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. Catch Lock Accessory 2 Removal tool 2 When the upper level is remov ed, remove the lower two locations. ⁄ • The frame can be removed from ...

  • Kenwood KDC-X7006 - page 37

    T roubleshooting Guide English | 37 Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ • AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 29) • A UX cannot be used when the KCA-iP200 is connected. ! • Cannot set up the subwoof er . • Cannot set up subwo ...

  • Kenwood KDC-X7006 - page 38

    T roubleshooting Guide 38 | English The messages shown belo w display your systems condition. Eject: • No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. • No CD in the unit. No Disc: No disc has been loaded in the disc magazine. TOC Error: • No disc has been loaded in the disc magazine. • The CD i ...

  • Kenwood KDC-X7006 - page 39

    English | 39 No Device: The USB device is selec ted as a source although no USB device is connected. ➪ Change the source to any sour ce other than USB. Connect an USB device, and change the source to USB again. N/A Device: An unsupported USB device is connected. ➪ For the supported USB devices, r efer to <http://www.kenwood.com/usb/>. No ...

  • Kenwood KDC-X7006 - page 40

    40 | English Specifications FM tuner section Fr equency range (50 kH z space) : 87.5 MH z – 108.0 MHz Fr equency range (200 kH z space) : 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 V/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 V/75 Ω) Fr equency response (±3 dB) : 30 H z – 15 kHz Signal to Noise ...

Fabbricante Kenwood Categoria CD Player

I documenti che otteniamo dal fabbricante del dispositivoKenwood KDC-X7006 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Kenwood
- manuali per l’uso KDC-X7006
- schede prodotto Kenwood
- opuscoli
- o etichette energetiche Kenwood KDC-X7006
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Kenwood KDC-X7006.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Kenwood KDC-X7006, manuali di manutenzione, brevi manuali o manuali utente Kenwood KDC-X7006. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Kenwood KDC-X7006.

Manuali per l’uso simili

Manuale completo del dispositivo Kenwood KDC-X7006, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Kenwood KDC-X7006 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Kenwood KDC-X7006.

Il manuale per l’uso completo Kenwood, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Kenwood KDC-X7006 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Kenwood KDC-X7006, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Kenwood KDC-X7006 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Kenwood KDC-X7006 - che ci dovrebbe aiutare nei primi passi durante l'uso Kenwood KDC-X7006
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Kenwood KDC-X7006
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Kenwood KDC-X7006 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Kenwood KDC-X7006?

Utilizza il modulo sottostante

Se non hai risolto il problema con Kenwood KDC-X7006 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Kenwood KDC-X7006 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)