Italiano dropdown-ico

Manuale per l’uso Fantec GL-35DSR

39 pagine Non applicabile
Scarica

Vai alla pagina of 39

Summary
  • Fantec GL-35DSR - page 1

    EN FANTEC GL-35DSR Network Attached Storage for 2 HDDs User Manual ...

  • Fantec GL-35DSR - page 2

    GL-35DSR Table of Contents Table of Contents 1  Getting Started .............................................................................................................................. .......... 1  1.1  About this Device ................................................................................................................. ...

  • Fantec GL-35DSR - page 3

    GL-35DSR Getting Started 1 Getting S t arted 1.1 About this Device The ultra compact design of the GL-35DSR makes this dual-bay network storage enclosure one of the smallest in the market, but it comes with flexibility and performance. Not only does it come with all the standard functions a network drive offers but thanks to RAID protection, all va ...

  • Fantec GL-35DSR - page 4

    GL-35DSR Getting Started 1.4 Detailed View 1.4.1 Front Press to turn on power. Press and hold for 3 seconds to shut down the system. Press and hold for 6 seconds to cut off power and forcefully power off the system (not recommended under normal circumstances). LED/Icon Status/Function • Blue = Power ON Access • Flashing blue = Read/Write data a ...

  • Fantec GL-35DSR - page 5

    GL-35DSR Getting Started 1.4.2 Rear Fan (40 mm) for cooling of hard disks. Button/Icon Status/Function Slot for security lock RESET • When the power is turned off, press and hold this button, turn on the power and let go of the button when you see the LED at HDD 1 light up red (~ 2 seconds) in order to enter the flash mode. USB 1.1 host port for ...

  • Fantec GL-35DSR - page 6

    GL-35DSR Getting Started 1.5 Quick Installation Guide Following is a quick installation guide to get you up and runnin g in a matter of minutes. For further details on each of the settings, please refer to the subsequent chapters. 1. Install minimum one hard drive. 2. Connect the Ethernet cable from your network router/switch to the GL-35DSR. 3. Wh ...

  • Fantec GL-35DSR - page 7

    GL-35DSR Getting Started 1.7 Before Use 1.7.1 Hard Drive Assembly 1. Unlock the switch at the bottom of the case and lift the front panel upward and away from the housing to remove it. 2. Install the hard drives as illustrated below with the top of the drives, where the label i s located, facing each other. Push the drives lightly into the SATA int ...

  • Fantec GL-35DSR - page 8

    GL-35DSR Getting Started 1.7.2 Initializing the NAS System In order to configure and access the network drive, the NAS system has to be initia lized first. To do so, use the Discover Tool program to locate the device, prepare the hard drives and set up the system. 1. Make sure that at least one hard drive has been installed and the network drive is ...

  • Fantec GL-35DSR - page 9

    GL-35DSR Getting Started 6. Select the drive mode from the list. If you hav e installed only one HDD, select “Single Drive”, or otherwise, for two HDDs select “Dual Drive”. Click OK to continue. If you have installed two hard drives and sele cted the “Dual Drive” mode, you can now select the RAID mode. Select “RAID 1” to create a mi ...

  • Fantec GL-35DSR - page 10

    GL-35DSR Getting Started EN 8/37 7. Select the firmware you like to install. This should be a “..*.tar..” file and has to be uploaded without decompressing the file first. 8. Double-check your settings and press OK to continue. If there is a mistake and you would like to change some of the settings, press C ancel to abort and start again from s ...

  • Fantec GL-35DSR - page 11

    GL-35DSR NAS Configuration 2 NAS Settings and User Interface 2.1 How to login To configure your GL-35DSR LAN, open your web browser, enter the IP address or device name of your GL-35DSR LAN and then use the web interface for further configuration. To locate the network drive and find out its IP address, we recommend using the Discover Tool program. ...

  • Fantec GL-35DSR - page 12

    GL-35DSR NAS Configuration 2.1.2 Web Browser & Device Name on a PC Use the device name, which by default is “//gl-35dsr”, enter that name into the URL field of your web browser and then access the web configuration interface of your GL-35DSR. Note This method of login only works on Windows and not on a Mac! 2.1.3 Safari Web Browser & Bo ...

  • Fantec GL-35DSR - page 13

    GL-35DSR NAS Configuration 2.2 User Interface & Settings 2.2.1 Albums List of available Albums Option to change the View how the media files are displayed Filter files and display them according to media type Click Download to save the selected files on your computer Double-click any media file to open it in the browser The media files that are ...

  • Fantec GL-35DSR - page 14

    GL-35DSR NAS Configuration 2.2.2 Library Toolbar Private folder for all personal files and documents Public folder for all shared files (e.g. SMB or UPnP-AV) Albums directory List of current Albums The Media Library can be used to manage your media files on the NAS. Files can be uploaded, downloaded, sorted, renamed and deleted via web browser. To ...

  • Fantec GL-35DSR - page 15

    GL-35DSR NAS Configuration 1. To share files, browse for your media files in the media library. 2. Select the files, click Share in the toolbar and select the user you would like to share t he files with. 3. A new folder with the user name and a link to the files is automatically created inside the “To” directory. 4. The other user is now able ...

  • Fantec GL-35DSR - page 16

    GL-35DSR NAS Configuration Displays important information about the NAS system Click to shutdown the system Click to reboot the system This menu displays important information about the NAS, such as IP address, firmware version, date & time as well as the disk usage. To shut down the system click Shutdown, to restart the system click Reboot . U ...

  • Fantec GL-35DSR - page 17

    GL-35DSR NAS Configuration Important Never turn off your unit during the firmware update procedure. This may damage your device! If the upgrade fails (e.g. power supply failure during fi rmware update), you may not be able to operate your device anymore Disk Management Displays details about the internal hard drives Displays details about the exter ...

  • Fantec GL-35DSR - page 18

    GL-35DSR NAS Configuration System Log Click on any of the tabs to see the complete log file • System Bootup Message – Displays the system start up log from boot to system ready. • System Log – Displays the main log of the system. • WebServer Log – Displays the log of the web server. • Samba Log – Displays the SMB log of the Samba se ...

  • Fantec GL-35DSR - page 19

    GL-35DSR NAS Configuration Network Device Name LAN setting DNS and Gateway Device Name This name is used to identify your device on the network. If you prefer a different name that is easier to remember, change it and click Submit to save the new name. When selecting a new hostname, make sure to use a unique name and not one that has already been u ...

  • Fantec GL-35DSR - page 20

    GL-35DSR NAS Configuration iTunes Server Advanced Settings Option to enable or disable the iTunes server Option to run a scan manually The iTunes server is enabled by default and will automatically stream all MP3 music that is stored inside the /Public/Music folder with iTunes. To add more songs, simply copy the new MP3 music f iles into the /Publi ...

  • Fantec GL-35DSR - page 21

    GL-35DSR NAS Configuration BitTorrent Service Click to upload new Torrent BitTorrent Service Settings List and details of current Torrent files To start downloading files, download a torrent file from the internet and then upload it to the network drive. Once the torrent file has been added, you can start downloading. The downloaded files will be s ...

  • Fantec GL-35DSR - page 22

    GL-35DSR NAS Configuration EN 20/37 2.2.5 Registration Device registration for remote access Note This function is currently not yet available! 2.2.6 About Displays copyright information and warranty disclaimer ...

  • Fantec GL-35DSR - page 23

    GL-35DSR Network Storage & Extra Features 3 Network S torage & Extra Features 3.1 File Access on a PC 3.1.1 Windows Explorer Use Windows Explorer and type “” followed by t he IP address or the device name gl-35dsr into the address field and press the Enter key on your keyboard. It will then list all available folders on your LAN disk. ...

  • Fantec GL-35DSR - page 24

    GL-35DSR Network Storage & Extra Features 2. Follow the setup wizard and fill in the path to your network drive. When entering the IP address, also add the folder name of the share (e.g. 192.168.11.11public). It is recommended to select the “reconnect at logon” option when you map the network drive, otherwise you will have to map it agai ...

  • Fantec GL-35DSR - page 25

    GL-35DSR Network Storage & Extra Features 2. Select any temporary or mapped network drives that you would like to remove and click OK to disconnect them. 3.1.4 FTP For FTP transfers, we recommend installing and using a separate FTP application, which can either be a free utility or shareware program. Note Files cannot be opened directly via FTP ...

  • Fantec GL-35DSR - page 26

    GL-35DSR Network Storage & Extra Features 3.2 File Access on a Mac 3.2.1 SMB To mount and access the network drive, use the Connect to Server command. 1. Click on “Go” and select “Connect to Server”. 2. Type “smb://” followed by the IP address of your network drive and click on Connect. 3. Select Registered User and enter your user ...

  • Fantec GL-35DSR - page 27

    GL-35DSR Network Storage & Extra Features 5. The mounted drive will be listed in your finder under Shared devices. There you can access the network drive and transfer your files. When no longer needed, click on the eject button to disconnect the drive. 3.2.2 FTP For FTP transfers, we recommend installing and using a separate FTP application, wh ...

  • Fantec GL-35DSR - page 28

    GL-35DSR Network Storage & Extra Features 3.3 BitTorrent Download Manager Used in conjunction with its built-in BitTorrent™ client, the NAS can be used to download files from the Internet and have them saved directly to the hard drive. 3.3.1 Starting a Download To start downloading files, download a torrent file from the internet and then upl ...

  • Fantec GL-35DSR - page 29

    GL-35DSR Network Storage & Extra Features 3.4 Printer Server This network drive is equipped with a printer server. Connect your USB printer to the USB host port on the back of your network drive to share it with other workstations on the same local network. 3.4.1 Installation on a PC Printing via the shared network printer will be slower than w ...

  • Fantec GL-35DSR - page 30

    GL-35DSR Network Storage & Extra Features 7. Make sure the network drive and printer are both turned on and connected to the same local network as your computer, then click on “Next”. 8. Enter the IP address of your network driv e (the port name will be filled out automatically) and then click on “Next”. 9. Select “Custom” and click ...

  • Fantec GL-35DSR - page 31

    GL-35DSR Network Storage & Extra Features 10. Select “RAW”, use the default port number “9100” and then click on OK to confirm it. 11. Click on Fin ish not complete the TCP/IP Wizard and close the dialog. 12. After clickin g on “Next”, a pop-up window will appear asking for a driver. Select your printer model from the list or browse ...

  • Fantec GL-35DSR - page 32

    GL-35DSR Network Storage & Extra Features 3.4.2 Installation on a Mac Printing via the shared network printer will be slower than when the printer is connect ed directly to the USB port on the computer. After you press the Print button, please wait for the printer to receive the data. 1. Go to System Preferences and click on Print & Fax. 2. ...

  • Fantec GL-35DSR - page 33

    GL-35DSR Network Storage & Extra Features 3.5 Media Server The UPnP media server can be used to share your photos, music files and videos that are stored on the network drive in the “Public” folder with a X box 360, a PlayStation 3 or any other DLNA compliant UPnP-AV client that is connected to the same local network. Before you start, make ...

  • Fantec GL-35DSR - page 34

    GL-35DSR Network Storage & Extra Features 4. Once inside the Public folder, you can now access your pictures, music or videos, depending on the media library you have selected on your game console. 5. Select and play the files you would like view or listen to and enjoy! 3.5.2 PlayStation 3 1. On your NAS, make sure that the media files you woul ...

  • Fantec GL-35DSR - page 35

    GL-35DSR Network Storage & Extra Features 3.6 iTunes Server When MP3 music files are stored in the “/Public/M usic” folder, the files will automatically appear on iTunes and music can be played directly from the network drive. 1. Store the MP3 music files that you would like to access from iTunes on the network drive in the Public directory ...

  • Fantec GL-35DSR - page 36

    GL-35DSR Network Storage & Extra Features EN 34/37 3.7 USB Copy When a USB drive is connected to the GL-35DSR via USB, all files on the USB drive can be copied to the internal hard drive of the network drive with a push of the BACKUP button. 1. Connect the USB drive to the front port of your GL-35DSR network drive. We recommend using self-power ...

  • Fantec GL-35DSR - page 37

    GL-35DSR Appendix 4 Appendix 4.1 Specifications Internal Hard Drive(s) • 3.5" SATA-I or SATA-II hard drives (1.5Gb/s or 3.0Gb/s) • 80GB - 2TB Interface/Ports • 10/100/1000Base-TX Auto MDI/MDI-X • 2x USB host ports for USB drives and printers Supported USB devices • USB hard drives (FAT32 only) • USB printers (RAW protocol) Supporte ...

  • Fantec GL-35DSR - page 38

    GL-35DSR Appendix 4.3 Technical Terms Description for terms and abbreviations used in this manual. BitTorrent™ BitTorrent is the name of a peer-to-peer (P2P) file distribution client application and also of its related file sharing protocol, both of which were created by programmer Bram Cohen. BitTorrent is designed to distribute large amounts of ...

  • Fantec GL-35DSR - page 39

    GL-35DSR Appendix EN 37/37 4.5 Precautions 4.5.1 Power on/off precautions It is recommended to switch the unit off when not in use. When re-locating the device or when not in use for an extended period of time, we strongly recommend unplugging the unit. 4.5.2 Location and placing precautions Avoid positioning your device in the following places: ? ...

Fabbricante Fantec Categoria Server

I documenti che otteniamo dal fabbricante del dispositivoFantec GL-35DSR possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Fantec
- manuali per l’uso GL-35DSR
- schede prodotto Fantec
- opuscoli
- o etichette energetiche Fantec GL-35DSR
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Fantec GL-35DSR.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Fantec GL-35DSR, manuali di manutenzione, brevi manuali o manuali utente Fantec GL-35DSR. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Fantec GL-35DSR.

Manuali per l’uso simili

Manuale completo del dispositivo Fantec GL-35DSR, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Fantec GL-35DSR dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Fantec GL-35DSR.

Il manuale per l’uso completo Fantec, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Fantec GL-35DSR - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Fantec GL-35DSR, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Fantec GL-35DSR che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Fantec GL-35DSR - che ci dovrebbe aiutare nei primi passi durante l'uso Fantec GL-35DSR
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Fantec GL-35DSR
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Fantec GL-35DSR in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Fantec GL-35DSR?

Utilizza il modulo sottostante

Se non hai risolto il problema con Fantec GL-35DSR con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Fantec GL-35DSR è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)