-
Image IMSB63910 - page 1
USER’S MANUAL QUESTIONS? If you have questions, or if there are missing parts, we will guar- antee complete satisfaction through direct assistance from our factory . TO A VOID DELA YS, PLEASE CALL DIRECT TO OUR T OLL- FREE CUSTOMER HOT LINE. The technicians on our customer hot line will provide immediate assistance, free of charge. CUSTOMER HOT L ...
-
Image IMSB63910 - page 2
2 IMAGE is a registered trademark of ICON Health & Fitness, Inc. Posting the W arning Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Image IMSB63910 - page 3
3 W ARNING: T o reduce the risk of drowning, electric shock, or serious injury , read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the hydrotherapy spa are adequately informed of all precautions. 2. Use the hydrotherapy ...
-
Image IMSB63910 - page 4
4 20. DANGER—Risk of electric shock. Keep all electrical appliances such as radios, tele- phones, televisions, and lights at least five feet away from the water . 21. A wire connector is provided on the electron- ics pack of the hydrotherapy spa to connect a minimum No. 6 A WG (13.3 mm 2 ) solid copper conductor between the spa and any metal equi ...
-
Image IMSB63910 - page 5
5 W ARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. SA VE THESE INSTRUCTIONS 35. W ARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body ma ...
-
Image IMSB63910 - page 6
6 Congratulations for selecting the new IMAGE ® RENEW 639 hydrotherapy spa. The innovative RENEW 639 allows you to enjoy all the benefits of hydrotherapy in the comfort and privacy of your home. Hydrotherapy is a proven method for soothing tired muscles after exercise or for relieving the stress of a busy life. The warm environment stimulates bloo ...
-
Image IMSB63910 - page 7
7 There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. If you set up the hydrotherapy spa inside: 1. The spa will increase the level ...
-
Image IMSB63910 - page 8
8 2. Close the valve knob on the drain hose. Thread the cap onto the drain hose. Locate the four gate valves inside the access open- ing (there are two gate valves per pump). Make sure that the gate valves are open and that the locking clips are snapped onto the stems of the gate valves, as shown in the inset drawing. Make sure that the six collars ...
-
Image IMSB63910 - page 9
9 5. Make sure that a qualified electrician has wired the spa to a 240-volt power source. Remove the two warning decals (see page 5) from the spa shell. Using a damp cloth, wipe the spa shell clean. Before filling the spa, make sure that it is in the desired position and that there is room to easily service it. Once the spa is filled, it will have ...
-
Image IMSB63910 - page 10
10 The hydrotherapy spa is designed to seat seven adults. The spa holds approximately 375 gallons of water and offers a heating system (80°F to 104°F), a filtration system, and adjustable hydrotherapy jets. Follow the guidelines below to use and maintain the spa for your long-term enjoyment. WIRING THE HYDROTHERAPY SP A The hydrotherapy spa is de ...
-
Image IMSB63910 - page 11
A. The filters can be removed for cleaning or replace- ment (see CHECKING AND CLEANING THE FIL- TERS on page 13). B. The underwater light can be used for night opera- tion (see USING THE CONTROLS on page 12). The spa includes both red and blue covers for the light. C. The temperature probe monitors water temperature. D. The volcano jet provides a s ...
-
Image IMSB63910 - page 12
12 Using the Controls Air Control 1: Determines the amount of air flowing through the hydrotherapy jets labeled 1 (above). If the control is turned counterclockwise, the amount of air will increase; if the control is turned clockwise, the amount of air will decrease. Air controls 2–4 function in the same manner . Air Controls 2, 3, and 4: Determi ...
-
Image IMSB63910 - page 13
13 The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa. MAINTENANCE SCHEDULE Daily • Check the water level and refill the spa to the level shown in step 5 on page 9. • Check the pH balance and sanitizer level. Adjust if necessary (see W A TER CHEMISTRY on this page). W ...
-
Image IMSB63910 - page 14
14 MAINT AINING THE PROPER PH BALANCE The pH factor is a measure of the relative acidity or alkalinity in the water , and is measured on a scale of 1 to 14. Pure water has a value of 7, which is neutral. Any value above 7 is alkaline, and any value below 7 is acidic. Y ou should maintain a slightly alkaline pH level, between 7.2 and 7.8, in the hyd ...
-
Image IMSB63910 - page 15
15 T o drain the hydrotherapy spa, follow the steps below: 1. Using the console, adjust the temperature to the lowest setting. 2. Shut off the power to the spa, at the circuit breaker or GFCI. 3. Remove the access panel from the spa (see A TT ACHING AND REMOVING THE ACCESS P ANEL on page 14). 4. Pull the hose out and hold it above the waterline. Re ...
-
Image IMSB63910 - page 16
16 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check to see if the GFCI breaker is tripped or was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR THE GFCI TRIPS WHILE THE SP A IS OPERA TING a. Reset the circuit breaker or the GFCI. If the cir- cuit breaker or the GFCI trips again, contact a qualified electrician for service ...
-
Image IMSB63910 - page 17
17 9. SYMPTOM: THE W A TER LEVEL DROPS a. A clamp or seal inside the pump compartment may be loose. Check inside the pump compart- ment for excess water and watch the pump unit while it is operating to see if water drips from any of the plumbing. If you can identify the location of the leak inside the spa jet unit, tight- en the clamp or replace th ...
-
Image IMSB63910 - page 18
18 Part List —Model No. IMSB63910/IMSG63910 R1 101A 1 1 Thermometer Fitting 2 1 3-wire Power Cord 3 2 Filter Cover with O-Ring 4 2 Filter O-Ring 5 2 Filter 6 2 Rubber Isolator 7 1 Blue Light Cover 8 1 Red Light Cover 9 12 #10 x 1” Sheet Metal Screw 10 1 2-speed Pump 1 1 1 Spa Cover 12 6 Dual Rotary Jet Face 13 4 Jet Pump/Motor O-ring 14 1 Heate ...
-
Image IMSB63910 - page 19
19 26 27 25 18 29 18 11 13 10 9 31 13 13 19 9 31 13 20 1 12 2 15 37 43 44 36 40 39 41 42 41 38 35 46 46 16 17 16 17 16 17 16 17 46 46 25 6 6 9 5 3 4 5 3 4 47 45 48 45 48 49 14 9 9 54 52 53 53 55 23 Exploded Drawing —Model No. IMSB63910/IMSG63910 ) R1 101A ...
-
Image IMSB63910 - page 20
Part No. 180722 R1 101A Printed in USA © 2001 ICON Health & Fitness, Inc. T o order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be pre- pared to give the following information when call ...
Hai una domanda su Image IMSB63910?
Utilizza il modulo sottostante
Se non hai risolto il problema con Image IMSB63910 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Image IMSB63910 è probabile che voglia condividere il modo di risolverlo.