-
Miele 09 968 440 - page 1
Oper ating and Installation Instructions V entilation hood T o pr event accidents and damage to the appliance, you must r ead these instructions before installing the appliance and using it for the first time. en-US M.-Nr . 09 968 440 ...
-
Miele 09 968 440 - page 2
Contents 2 IMPORT ANT SAFETY INS TRUCTIONS ................................................................. 4 Caring for the environment ................................................................................. 13 Description of functions ...................................................................................... 14 Con@ctivity ...
-
Miele 09 968 440 - page 3
Contents 3 Installation Instructions .......................................................................................... 31 Disassembly ........................................................................................................... 31 Installation parts ............................................................................. ...
-
Miele 09 968 440 - page 4
IMPORT ANT SAFETY INS TRUCTIONS 4 READ AND SA VE THESE INSTRUC TIONS This appliance complies with current safety r equirements. Impr oper use of the appliance can lead t o personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep thes ...
-
Miele 09 968 440 - page 5
IMPORT ANT SAFETY INS TRUCTIONS 5 Children As w ith any appliance, close supervision is necessary when used by children. Please super vise children in the vicinity of the hood and do not let them play with it. Dange r of suffocation! Ensure that any plastic wr appings, bags, etc. are disposed of safely and k ept out of the reach of chil ...
-
Miele 09 968 440 - page 6
IMPORT ANT SAFETY INS TRUCTIONS 6 Be cer tain your appliance is properly installed and gr ounded by a qualified technician. T o guarant ee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding syst em. It is imperative that this basic safety requir ement be met. If there is any doubt, ha ...
-
Miele 09 968 440 - page 7
IMPORT ANT SAFETY INS TRUCTIONS 7 During installation, maintenance, and r epair work, the ventilation hood must be disconnected fr om the electrical supply . It is only completely isolat ed from the electricity supply if one of the following applies: – The circuit br eakers on the electrical service panel are tripped. – The screw-type fuses ...
-
Miele 09 968 440 - page 8
IMPORT ANT SAFETY INS TRUCTIONS 8 W ARNING: T O REDUCE THE RISK OF INJURY T O PERSONS IN THE EVENT OF A COOKT OP GREASE FIRE, OBSERVE THE FOLL OWING*: – a) SMO THER FLAMES with a close fitting lid, cookie sheet, or metal tr ay then turn off the burner . BE CAREFUL T O PREVENT BURNS. If the flames do not go out immediately, EV ACU A TE AND CAL ...
-
Miele 09 968 440 - page 9
IMPORT ANT SAFETY INS TRUCTIONS 9 Overheat ed oils and fats can ignit e and set the ventilation hood on fire. When cooking with oils or fats, do not leave pots, pans or fryers unattended. Never leave an electric grill unatt ended when grilling. F at and debris deposits impair the proper functioning of the ventilation hood. T o ensure that c ...
-
Miele 09 968 440 - page 10
IMPORT ANT SAFETY INS TRUCTIONS 10 Pr oper installation W ARNING: T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY T O PERSONS, OBSERVE THE FOLL OWING: – a) Installation work and electrical wiring must be done by quali fied person(s) in accordance with all applicable codes and standards, including fir e-r ated construction. – b) Suffi ...
-
Miele 09 968 440 - page 11
IMPORT ANT SAFETY INS TRUCTIONS 11 Be sur e t o observe the information contained in the "Installation" section when mounting the ventilation hood. When install ing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained fr om your Miele dealer or from Miele T echnical Service. Exhaust a ...
-
Miele 09 968 440 - page 12
IMPORT ANT SAFETY INS TRUCTIONS 12 FCC Radiation Exposure Statement This equipment co mplies with FCC r adiation exposure limits set forth for an uncontrolled envir onment. This equipment should be installed and oper ated with minimum distance 8" (20 cm) between the r adiator and your body . Industry Canada Statement This digi tal appa ...
-
Miele 09 968 440 - page 13
Caring for the envir onment 13 Disposal of the packing mat erial The cardboar d box and packing mat erials pr otect the appliance during shipping. They have been designed to be biodegradable and r ecyclable. Ensure that any plastic wr appings, bag s, etc. are disposed of safely and kept out of the reach of childr en. Danger of suffocation! Disposal ...
-
Miele 09 968 440 - page 14
Description of functions 14 The following functions are available on your ventilation hood, depending on the model: V ented mode The air is drawn in and cleaned by the gr ease filt ers and directed outside. Non-return flap A non-return flap in the ducting pr events the e xchange of inside and outside air from occurring when the ventilation hood is ...
-
Miele 09 968 440 - page 15
Description of functions 15 Con@ctivity 2.0 function Automatic contr ol This hood features a communication fun ction which enables the automatic control of the hood based on the operational status of a Miele cookt op. T o enable the communication function, th e cooktop must be equipped with the corresponding Con@ctivity 2.0 stick . Please refer ...
-
Miele 09 968 440 - page 16
Guide to the appliance 16 ...
-
Miele 09 968 440 - page 17
Guide to the appliance 17 a Chimney ext ension b Chimney c Canopy d Control panel e Grease filt ers f Recirculation vent (only for recir culation mode) g Glass edge lighting h LED cooktop lighting i OdorF ree Char coal Filter optional accessory for recir culation mode j On/Off button for glass edge lighting k Button for cooktop lighting l On/Off bu ...
-
Miele 09 968 440 - page 18
Operation (Aut omatic mode) 18 When Con@ctivity 2.0 is active, the hoo d always operat es in Automatic mode (see "Activating Con@ctivity 2.0"). See "Cooking without Con@ctivity 2.0" for informa tion on manually operating the hood. Cooking with Con@ctivity 2.0 (Au tomatic mode) T urn on a burner to the desired power setting. ...
-
Miele 09 968 440 - page 19
Operation (Aut omatic mode) 19 Cooking process If, for example, you switch on a burner at the highest power setting to heat cookware in pr eparation for searing and then reduce the power level after appr ox. 60 to 90 seconds, a cooking process is r ecognized. The hood turns on automatically and, after the cooktop power level has been reduced, s ...
-
Miele 09 968 440 - page 20
Operation (Aut omatic mode) 20 T emporarily e xiting Automatic mode T o tempor arily exit the Automatic mode when cooking: Manu ally select a different fan level, or Manually turn the hood off, or Activat e the Delayed shut down function on the ventilation hood. The fan turns off after the delay time selected, and the lighting will ...
-
Miele 09 968 440 - page 21
Operation (Manual mode) 21 Cooking without Con@ctivity 2.0 (Manual mode) The hood can be operat ed manually if: – The Con@ctivity 2.0 function is not activated. – Y ou have tempor arily deactivated the Con@ctivity 2.0 function (see "T emporarily e xiting Automatic mode"). T urning on the fan P r ess the On/Off button . The fan ...
-
Miele 09 968 440 - page 22
Operation (Manual mode) 22 T urning cooktop lighting On/Off The cooktop lighting can be turned on a nd off separat ely from the fan. T o do so, press the button. The symbol is lit when the co oktop lighting is turned on. P ower management The ventilation hood features a power manag ement system for switching off the lighting and reducin ...
-
Miele 09 968 440 - page 23
Operation (Aut omatic and Manual modes) 23 Glass edge lighting T urning on the glass edge lighting The glass edge lighting can be turned on and off separ at ely from the fan and the cooktop lighting. P r essing the Glass edge lighting button turns on the backlighting for the glass edge. Changing the color of the glass edge lighting The colo ...
-
Miele 09 968 440 - page 24
Operation (Aut omatic and Manual modes) 24 Filter saturation i ndicator The number of hours the hood has been in oper ation is st ored in appliance memory . The filter satur ation indicators show when the filt ers need to be cleaned or changed by lighting up the grease filt er symbol or OdorF ree Char coal Filter symbol . Additional informa ...
-
Miele 09 968 440 - page 25
Operation (Aut omatic and Manual modes) 25 Activating/changing the grease filter satur ation counter The OdorF ree Char coal Filter is requir ed for r ecir culation mode. The filter satur ation counter for the OdorF ree Char coal Filter requir es one- time activation and must be set to match your cooking habits. Pr ess the On/Off button to ...
-
Miele 09 968 440 - page 26
Cleaning and care 26 WARNING: T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY T O PERSONS, OBSERVE THE FOLL OWING: Befor e cleaning or servicing the hood, disconnect it from the power supply, see "IMPORT ANT SAFETY INSTRUC TIONS". Stainless steel housing General The surfaces and control butt ons are susce ptible to scr atching ...
-
Miele 09 968 440 - page 27
Cleaning and care 27 Special instructions for control butt ons Do not leave dirt and debris on the butt ons for any length of time. Otherwise they may become discol ored or damaged. Remove any dirt or debris immediately . Observe the general cleaning instructions contained in this chapter . Do not use a stainless steel cleaner t o clean the con ...
-
Miele 09 968 440 - page 28
Cleaning and care 28 T o remove a gr ease filter , release the locking clip. Then, open the filter to a 45° angle, unhook it, and remove it from the hood. Cleaning the grease filters by hand Cle an the filters with a soft nylon brush in a mild solution of hot water and dish soap. Do not use undiluted dish soap. Unsuitable cleaning agents U ...
-
Miele 09 968 440 - page 29
Cleaning and care 29 Rein stall the grease filt ers. When inserting the filters, make sur e that the locking clip is facing down. If the filters have been installed incorrectly, you can insert a small screwdriver int o the slit to disengage the locking clip. Resetting the filter saturation count er for the grease filters Once cleaning is co ...
-
Miele 09 968 440 - page 30
Cleaning and care 30 When to change the OdorF ree Char coal Filter Always r eplace the OdorF ree Charcoal Filt er whenever it no longer absorbs kitchen odors effectively . Replace the filter at least once every 6 months. The OdorF ree Char coal Filter satur ation coun ter will light up to r emind you to change the charcoal filt er regularly ...
-
Miele 09 968 440 - page 31
Installation 31 Before installation Befor e installing the appliance, read all of the information contained in this chapter and also in the "IMPORT ANT SAFETY INSTRUC TIONS" section. Removing the protective film The housing components are cover ed by a p rot ective film to prevent them from becoming damaged during transport. Pleas ...
-
Miele 09 968 440 - page 32
Installation 32 Installation parts ...
-
Miele 09 968 440 - page 33
Installation 33 a 3 protective installation sheets for use when installing the chimney b 1 exhaust connector for an exhaust duct 6" (150 mm). c 1 reducer for an exhaust duct 5" (125 mm). d 1 non-return flap for installation in the outlet duct collar of the motor unit (not for recir culation mode). Depending on the device version, ...
-
Miele 09 968 440 - page 34
Installation 34 Appliance dimensions The drawing is not t o scale. a Extraction b Recirculation c Air vent positioned at top for r ecirculation ...
-
Miele 09 968 440 - page 35
Installation 35 de Mounting area (only d is r equired for r ecirculation hoods). Wall and ceiling area for e xhaust duct opening and for wall socket installation. Only the wall socket installation is requir ed for recir culation hoods. V ent collar 6" (150 mm), with adapter 5" (125 mm). Distance between cooktop and ventilation hoo ...
-
Miele 09 968 440 - page 36
Installation 36 Installation recommendations – We also r ecommend a distance of at least 25 ¹/₂" (650 mm) above electric coo ktops to pr ovide more workspace and easier cooking under the hood. – When selecting an installation height, always tak e the user height into consideration. Users should have ample space to work comfortably on th ...
-
Miele 09 968 440 - page 37
Installation 37 Plywood backing The majority of the weight of the in stalled ventilation system will be supported by the lower r etaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the requir ed locations, a plywood backing (min. ½ " (13 mm) thick) spanning at least two studs must b ...
-
Miele 09 968 440 - page 38
Exhaust duct 38 WARNING: Danger of t oxic fumes. Gas cooking appliances release carbon monoxide that can be harmful or fatal if inhaled. T o reduce the risk of fir e and to pr operly e xhaust air , the exhaust gases extr acted by the hood should be vented outside of the building only . Do not vent exhaust air int o spaces within walls or ceilings o ...
-
Miele 09 968 440 - page 39
Exhaust duct 39 Condensate trap In addition to insulating the e xhaust duct, w e recommend installing a condensate tr ap to collect and evaporat e any condensate which might accumulate. Condensate tr aps are available for exhaust ducts with a diamet er of 5" (125 mm) or 6" (150 mm). When insta lling a condensate tr ap, make sure that ...
-
Miele 09 968 440 - page 40
Electrical connection 40 WARNING: T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY T O PERSONS, OBSERVE THE FOLL OWING: All electrical work should be per formed by a qualified electrician in strict accordance with national regulations (for USA: ANSI-NFP A 70) and local safety regulations. Installation, repairs and other work by unqualified pe ...
-
Miele 09 968 440 - page 41
Activating Con@ctivity 2.0 41 Activating Con@ctivity 2.0 T o use the Con@ctivity 2.0 function, the r adio link between the cookt op and the hood must be activated. Both appliances must be installed and oper ational. Y ou only need to carry out the activati on procedur e once. If the appliances are disconnect ed from the electricity supply, for exam ...
-
Miele 09 968 440 - page 42
Activating Con@ctivity 2.0 42 If Con@ctivity 2.0 has been activated, the indica tors for levels 2 and 3 will be constantly lit. If Con@ctivity 2.0 has not been activat ed, the indicators for levels 2 and 3 will flash simultaneously . T o exit the check, pr ess the Delayed shut down button 5 15 . All indicators will go out. T o check whe ...
-
Miele 09 968 440 - page 43
Service and warranty 43 F or faults that you cannot resolve on your own, please contact your Miele dealer or Mie le T echnical Service. The telephone number for the T ech nical Ser vice Department is listed at the back of these instructions. When contacting Miele, please state the model and serial number of your ventilation hood. These can be found ...
-
Miele 09 968 440 - page 44
T echnical data 44 F an motor 350 W LED cooktop lighting 3 x 3 W Glass edge lighting 10 W T otal connected load 369 W V oltage, frequency 120 V AC, 60 Hz F use r ating 15 A P ower cord length 6.5 ft (2 m) Weight 59 lbs (27 kg) Optional accessories for recir culation mode: Recir culation kit DUW 20 and OdorF ree Charcoal Filt er DKF 12 Contains FCC ...
-
Miele 09 968 440 - page 45
...
-
Miele 09 968 440 - page 46
...
-
Miele 09 968 440 - page 47
9 Independence Way Princeton, NJ 08540 Phone: Fax: www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial number of your appliance available before contacting Technical Service. Canada Importer Miele Limited Headquarters and Miele Centre 800-843-7231 609-419-9898 609-419-4298 Technical Service & Support Natio ...
-
Miele 09 968 440 - page 48
M.-Nr . 09 968 440 / 02 en-US DA 6296 W ...
Hai una domanda su Miele 09 968 440?
Utilizza il modulo sottostante
Se non hai risolto il problema con Miele 09 968 440 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Miele 09 968 440 è probabile che voglia condividere il modo di risolverlo.