-
Zanussi ZWH7132J - page 1
EN User manual Washing Machine ZWH 7132J ...
-
Zanussi ZWH7132J - page 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ...
-
Zanussi ZWH7132J - page 3
• Obey the maximum load volume of 7 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be repla ced by the manu- facturer, its service agent or sim ilarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MP a) and 8 bar (0,8 ...
-
Zanussi ZWH7132J - page 4
This appliance complies with the E.E.C. Di- rectives. Water connection • Make sure not to cause damage to the water hoses. • The appliance is to be connected to the wa- ter mains using the new supplied hose-sets. Old hose sets must not be reused. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water ...
-
Zanussi ZWH7132J - page 5
Product description 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 4 5 6 Detergent dispenser drawer Compartment for detergent used for pre- wash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak de tergent is added at th ...
-
Zanussi ZWH7132J - page 6
To activate this de- vice, rotate the button (without pressing it) inside the door clock- wise until the groove is horizontal. If neces- sary use a co in. To disable this de- vice and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical. Control Panel On the following page there is a picture of ...
-
Zanussi ZWH7132J - page 7
Table of symbols Night Cycle Rinse Hold Child Safety Lock Eco Programme selector dial, spin speed button and available options Programme Selector Dial It allows you to switch the appliance on/off and/ or to select a programme. Spin Reduction By pressing this button you can change the spin speed of the selected programme. Available options: Night Cy ...
-
Zanussi ZWH7132J - page 8
Door locked pilot light The pilot light 9 illuminates when the pro- gramme starts and indicates if the door can be opened: • light on: the door cannot be opened. The machine is working or has stopped with wa- ter left in the tub. • light off: the door can be opened. The pro- gramme is finished or the water has been emptied out. • light blinki ...
-
Zanussi ZWH7132J - page 9
these 2 buttons again, the acoustic signal is re- activated. Child safety lock This device permits you to leave the appliance unattended so you do not need to worry that children might be injured by or cause damage to the appliance. This fu nction remains enabled also when the washing machine is not working. There are two different ways to set this ...
-
Zanussi ZWH7132J - page 10
speed provided for that programme. (See "Washing programmes" for the maximum al- lowed spin speed). Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant pilot light illumi- nates. Select the available optio ns by means of buttons 3, 4, 5 and 6 Depending on the pr ogr ...
-
Zanussi ZWH7132J - page 11
starts blinking. Press the button again to re- start the programme. Cancelling a programme Turn the selector dial to to cancel a pro- gramme which is running. Now you can select a new programme. Opening the door after the programme has started First set the machine to pause by pressing the butto n 7 . If the pilot light 9 blinks and after a few min ...
-
Zanussi ZWH7132J - page 12
Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a spe- cial detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface a ...
-
Zanussi ZWH7132J - page 13
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartm ent COTTONS 1) 90° - 30° Main wash - Rins es Maximum spin speed at 1300 rpm Max. load 7 kg - R educed load 3,5 kg White and coloured cotton (normally soiled items). SPIN REDUCTION NIGHT ...
-
Zanussi ZWH7132J - page 14
Programme Maximum an d Minimum Temperature Cycle De scription Maximum Sp in Speed Maximum Fa brics Lo ad Type of Laundry Options Detergent Compartment JEANS 40° Main wash - Rinses Maximum spi n speed at 900 rpm Max. load 3,5 kg With this pro gramme it is possible t o wash items like tro u- sers, shirt s or jackets in denim and also jersey realized ...
-
Zanussi ZWH7132J - page 15
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartm ent RINSE Rinses Maximum spin speed at 1300 rpm Max. load 7 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machin e performs 3 rinses, fo llowed b ...
-
Zanussi ZWH7132J - page 16
ening powder manufacturer's instructions. This will help to prevent the formation of lime depos- its. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer The washing powder and addi tive dispenser drawer should be cleaned regu larly. M A X Remove the dra ...
-
Zanussi ZWH7132J - page 17
Check carefully whether the pump impeller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Service Centre. Put the cap back on the emergency emptying hose and place the latter back in its seat. Replace the filter into the pump by inserting it correctly into the special guides. Screw the pump cov- er firmly by turning it clo ...
-
Zanussi ZWH7132J - page 18
• Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out. • Screw the water inlet hose back on and re- position the emergency emptying hose after having put the cap on again. • When you intend to start the machine up again, make sure that the room temperature is above 0°C ...
-
Zanussi ZWH7132J - page 19
Problem Possible cause/Solut ion The machine does not fill: The water tap is closed. • Open the wate r tap. The inlet hose is squashed or kin ked. • Check the inlet hose connection. The filter i n the inlet hose or t he inlet valve filter a re blocked. • Clean the water in let filters. (See "Clean ing the water inlet f ilters" for m ...
-
Zanussi ZWH7132J - page 20
Problem Possible cause /Solution The machine vibrates is noisy: The transit bolts and packing have not been removed. • Check the corre ct installation of the applia nce. The support f eet have not been adjuste d • Check the correct levelling of th e appliance. The laundry is n ot evenly distributed in the drum. • Redis tribute the l aundry. M ...
-
Zanussi ZWH7132J - page 21
Spin Spee d Maximum 1300 rpm Consumption values The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. Programmes Load (kg) Energy con- sumption (kWh) Water con- sumption (lit re) Approximate programme duration (mi- nutes) Remaining moisture (%) 1) Cottons 6 ...
-
Zanussi ZWH7132J - page 22
After removing all the packaging, carefully lay machine on it's back to remove the polystyrene base from the bottom. Remove the power suppl y cabl e and t he hose from the hose holders on the rear of the appliance. Unscrew the three bolts. Slide out the relevant plastic spacers. Open the porthole, remove the polystyr- ene block fitted on the d ...
-
Zanussi ZWH7132J - page 23
1. Connect the ap- propriate end of the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. 35° 45° 2. Connect the other end of the inlet hose to the back of the appliance. The inlet hose can ONLY be turned as showed in the picture. Do not place the inlet hose down- wards. Angle the hose to the left or right depen ...
-
Zanussi ZWH7132J - page 24
Min. 60 cm (23.6”) Max. 90 cm (35.4”) If your drain hose looks like this (see beside) you do not requi re the “ U” piece”. Just push the hose firmly in to the standp ipe. 2. Onto a sink outlet spigot. Loop If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and ...
-
Zanussi ZWH7132J - page 25
household waste disposal service or the shop where you purchased the product. Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by dis- posing of them properly in appropriate collec- tion containers. Ecological hints T ...
-
Zanussi ZWH7132J - page 26
26 www.zanussi.com ...
-
Zanussi ZWH7132J - page 27
27 www.zanussi.com ...
-
Zanussi ZWH7132J - page 28
www.zanussi.com/shop 192981401-A-482012 ...
Hai una domanda su Zanussi ZWH7132J?
Utilizza il modulo sottostante
Se non hai risolto il problema con Zanussi ZWH7132J con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Zanussi ZWH7132J è probabile che voglia condividere il modo di risolverlo.