Manuale per l’uso Rimage 360i

27 pagine 0.73 mb
Scarica

Vai alla pagina of 27

Summary
  • Rimage 360i - page 1

    Rimage 360i ™ User Guide This manual provides the information ne eded to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Gui de. ...

  • Rimage 360i - page 2

    ...

  • Rimage 360i - page 3

    Corporate Headquarters: Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA European Headquarters: Rimage Eur ope GmbH Hans-Böckler-Straße 7 63128 Dietzenba ch, Germ any CD and DVD Recor d ing Soft ware Disclaimer This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own ...

  • Rimage 360i - page 4

    Rimage 360i Support information For Rimage 360i™ Support, go to: www.rimage.com/Rimage360iSupport North America South America Asia/Pacific Europe Africa Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA Rimage Eur ope GmbH Hans-Böckler-Straße 7 63128 Dietzenba ch, Germ any ...

  • Rimage 360i - page 5

    Contents Contents Introduction ..................................................................................................................... 1 Requirements .............................................................................................................. 1 Software requirements ................................................... ...

  • Rimage 360i - page 6

    Rimage 360i ii ...

  • Rimage 360i - page 7

    Introduction Introduction This manual provides the information ne eded to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Gui de. Requirements Software requirements The Rimage 360i will operate only with the Rimage 3 60i Software. Operating System requirements T ...

  • Rimage 360i - page 8

    Rimage 360i 2 110808_C Label design requirements The Rimage 360i Software includ es a label editor called CD De sig ner ™ , which is installed on your system. You can use CD De signer to design you r label s. If you have another software application that you pref er, you can create a label and save it as an Acrobat ® (.pdf) file, a .jpg file, or ...

  • Rimage 360i - page 9

    Identify the parts of the Rimage 360i Identify the parts of the Rimage 360i This section describe s the Rimage 3 60i hardware and its feature s. Front View Front Cove r Input Door Project Status Indicator (PSI) Ink Cartridge Access Door Disc Output 110808_C 3 ...

  • Rimage 360i - page 10

    Rimage 360i 4 110808_C Rimage 360i Buttons On the right side of the Rimage 360i, there is one but ton. Pause button • Press this button once to pause the Rimage 360i. • Press this button again to return to normal operation. Inside the front cover of the 360i, there are three buttons. To access these buttons, open the fron t cover. n Warning: To ...

  • Rimage 360i - page 11

    Identify the parts of the Rimage 360i Rimage 360i Project St atus Indicator (PSI) On the front of the Rimage 360i is the Project Status Indicator (PSI), made up of 5 LEDs. LED: Light-emitting diode. A type of diode that emits light when current passes throu gh it. The PSI communicates Rimage 36 0i, disc, p rinter, and recorder status. Some of the f ...

  • Rimage 360i - page 12

    Rimage 360i 6 110808_C Rear view Power Po Filter Rear Sw it ch wer Cord Port Cover Cove r USB 2.0 Port ...

  • Rimage 360i - page 13

    Operate the Rimage 360i Operate the Rimage 360i This section provides the information that y ou need to prod uce CDs or DVDs with the Rima ge 360i. Powering on the Rimage 360i 1. To power on the 360i, press the power switch on the rear of the 360i. The Rimage 360i initializes. 2. To power off the 360i, press the power switch again. Pausing the Rima ...

  • Rimage 360i - page 14

    Rimage 360i 8 110808_C Loading the discs 1. Open the input door. 2. Place up to 25 discs in the disc input with the printable side facing out. 3. Close the input door. ...

  • Rimage 360i - page 15

    Operate the Rimage 360i Select your printing preferences Printing Preferences allows you to set up and run your Rimage 3 60i to produce the best possibl e label on your discs. # Tip: For additional information about these features, access the online help in Printing Preferences. Through Printing Preferences, you can: • Set the print quality • A ...

  • Rimage 360i - page 16

    Rimage 360i 10 110808_C Setting the print quality Use this procedure to change the print q uality for your images, if necessary. 1. Navigate to Printing Preferences (refer to page 9 ). 2. Select the Disc/Quality tab. 3. In the Disc Options panel, select the appropriate Ty pe from the drop-down list. 4. In the Print Quality panel, select the desired ...

  • Rimage 360i - page 17

    Operate the Rimage 360i Adjusting the ink volume used This functionality allows you to adjust the amount of ink that is u sed. 1. Navigate to Printing Preferences (refer to page 9 ). 2. Select the Basic s tab. 3. Select Advanced Features . The Advan ced Features wind ow open s. 4. To increase or decrease the ink volume or dry time, move the Ink Vol ...

  • Rimage 360i - page 18

    Rimage 360i 12 110808_C # Tip If you print on areas of the disc where the surface is not suitable for printing, the ink can smear or run. Changing or enabling masking This functionality allows you to adj ust the non-printable are a, or mask, settings for standard CD/DVD 120 mm media. 1. Navigate to Printing Preferences (refer to page 9 ). 2. Select ...

  • Rimage 360i - page 19

    Operate the Rimage 360i # Tip: The image below shows a disc with no stacking ring. # Tip: Rimage recommends that you set the inner diameter so that it is 1 mm greater than the actual measurement to prevent the ink from smearing. The inner diameter on Rimage media is 23 mm. Set the inner diameter field to 24 mm. Printing on hub without a stacking ri ...

  • Rimage 360i - page 20

    Rimage 360i 14 110808_C Centering the image on the disc The Rimage 360i provides two ways to cente r the image on the disc. You can use the Auto Centering method or the Manual Centering method. The Auto Centering m ethod is accurate to within +/- 0.5 mm. You can improve the centeri ng position accuracy with the manual centering adjustment to better ...

  • Rimage 360i - page 21

    Maintain the Rimage 360i Maintain the Rimage 360i The procedures in this section will help keep your Rimage 360i in optimum opera ting con dition. General Cleaning # Tip: To keep your Rimage 360i clean, keep it in a dust free environment. Cleaning the exterior If your Rimage 360i becomes dusty: 1. Power off the Rimage 360i. 2. Wipe the exterior wit ...

  • Rimage 360i - page 22

    Rimage 360i 16 110808_C Replace Consumables Replacing the fan filter The fan filter is a consumable item. You will need to change the fan filter after 20 ink cartri dges. Use this procedure to change the fan filter. 1. On the rear of the Rimage 360i, pre s s the tab on the filter cover and lift up the filter cover. 2. Remove the filter. 3. Place th ...

  • Rimage 360i - page 23

    Maintain the Rimage 360i Replacing the ink cartridges Use this procedure to change the in k cartridges on your Rim age 360i. - Important! You must u se t he appropriate ink cartri dges in one of the configurations as stated on page 1 of this document . 1. Open the ink cartridge access door . The ink cartridge carri age moves to an accessibl e posit ...

  • Rimage 360i - page 24

    Rimage 360i 18 110808_C Learn More Rimage 360i Specifications Standard System One disc recorder, Rimag e 360i with Rimage 360i Di sc Color Printer, and software. Software requirements Rimage 360i Software Input bin capacity 25 Discs Output capacity 25 Discs Physical size Width – 15.25” (38.7 cm) Height – 19.00” (48.3 cm ) Depth – 20.00” ...

  • Rimage 360i - page 25

    Learn More Technical support and product updates Support for the Rimage 360i is available through your authorized reseller. - Important! Register your Rimag e 360i online or complete and return the registration ca rd so Rimage can notify you of upgrade s as they become available. Safety information This manual and the indications on the prod uct al ...

  • Rimage 360i - page 26

    Rimage 360i 20 110808_C Safety testing Product name: Rimage 360i Model: RAS17 Notice for USA Tested to Comply with FCC Standards FO R HOME OR OFFICE USE. NOTE: This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Rules. T hese limits are d esigned to provide reasonable pro ...

  • Rimage 360i - page 27

    Learn More Rimage 360i Limited 1 Year Warranty Rimage warrants, to the original end user onl y, that all non-consumable par ts of the Rimage 360i Autoloader products will be free from defects in material and workmanship for 12 months, according to the follo wing terms: • Rimage will provide 30 da ys of free telephone suppor t beg inning on the da ...

Fabbricante Rimage Categoria Printer

I documenti che otteniamo dal fabbricante del dispositivoRimage 360i possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Rimage
- manuali per l’uso 360i
- schede prodotto Rimage
- opuscoli
- o etichette energetiche Rimage 360i
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Rimage 360i.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Rimage 360i, manuali di manutenzione, brevi manuali o manuali utente Rimage 360i. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Rimage 360i.

Manuali per l’uso simili

Manuale completo del dispositivo Rimage 360i, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Rimage 360i dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Rimage 360i.

Il manuale per l’uso completo Rimage, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Rimage 360i - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Rimage 360i, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Rimage 360i che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Rimage 360i - che ci dovrebbe aiutare nei primi passi durante l'uso Rimage 360i
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Rimage 360i
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Rimage 360i in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Rimage 360i?

Utilizza il modulo sottostante

Se non hai risolto il problema con Rimage 360i con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Rimage 360i è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)