Italiano dropdown-ico

Manuale per l’uso Emerson 00825-0100-4530 Rev EC

36 pagine 5.12 mb
Scarica

Vai alla pagina of 36

Summary
  • Emerson 00825-0100-4530 Rev EC - page 1

    Quick Installat ion Guide 00825-0100- 4530, Rev EC March 2013 Superior Pe r formanc e Guided W av e Radar Lev el and Inter face T ransmitte r ...

  • Emerson 00825-0100-4530 Rev EC - page 2

    March 2013 2 Quick Installati on Guide About this guide This installati on guide provides b asic guidelines for Rosemoun t 5300 Series transmitters. It does no t provide instruct ions for configuration , diagnostics, maintenance, service, trouble shooting, Expl osion-proof, Flame proof, or intrinsically safe (I.S .) installations. Re fer to the Ros ...

  • Emerson 00825-0100-4530 Rev EC - page 3

    Quick Installat ion Guide 3 March 2013 Any sub stitution o f non-authorized p arts or repair , othe r than exc hang ing the c omplet e transmitter he ad or probe ass embly , may jeopardiz e safety and is prohibited. Unauthorized c hanges t o the product are stric tly prohibited as they m ay uninte ntionally and unpredictably alter performance and j ...

  • Emerson 00825-0100-4530 Rev EC - page 4

    March 2013 4 Quick Installati on Guide St ep 1: Confirm system readiness Conf irm HART revision capability  If usi ng HA RT- bas ed cont ro l o r ass et mana geme nt s ys tem s, conf ir m th e HA RT capabilit y of those systems prior to tr ansmitt er instal lat ion. Not all syste ms are capable of communicating with the HART R evision 7 protocol ...

  • Emerson 00825-0100-4530 Rev EC - page 5

    Quick Installat ion Guide 5 March 2013 St ep 2: Mount the transmitter head/probe T ank connection with flange 1. Place a g ask et on top of the tank flange . 2. Lowe r the probe with flange into the tank. 3. Tighten the bolts and nuts with sufficie nt torque regarding flange and gask et choice . 4. Loose n the nut that c onnec ts the housing to the ...

  • Emerson 00825-0100-4530 Rev EC - page 6

    March 2013 6 Quick Installati on Guide St ep 2 c ontin ued... Brack et mounting, on wall 1. Mount the brack et direc tly to the wall with screws suitable for the purpo se . 2. Mount the tra nsmitte r with probe to th e brack et and secure the instal lation with the three supplied screws. Bracket mounting, on pipe 1. Put the two U-bolts through th e ...

  • Emerson 00825-0100-4530 Rev EC - page 7

    Quick Installat ion Guide 7 March 2013 St ep 2 c ontin ued... Remo te h o us in g 1. Re move the tran smitte r he ad from the probe b y unscrewing the M50 nut. For saf et y inform ation regar ding ESD discha rge , see the applicabl e warning on page 3 . 2. Mount the probe in the tank. 3. Mount the bracket t o the pole, ma king sure the distance bet ...

  • Emerson 00825-0100-4530 Rev EC - page 8

    March 2013 8 Quick Installati on Guide St ep 3: Connec t the wirin g Wiring and power supply requ irements can be dependent upon the app roval certification . As with all F OUNDATION fieldbus requirements, a conditioned power supply and terminat ing resistors are requ ired for proper o peration. It is recomme nded that sh ielded twisted pair wiring ...

  • Emerson 00825-0100-4530 Rev EC - page 9

    Quick Installat ion Guide 9 March 2013 T o connec t the transmitter 1. V erify that the powe r supply is disconne cted. 2. Re move the te rminal b lock co ve r (see picture below ). 3. Pull the cable th rough the cable g land/conduit. For Explosion-proof / Flameproof installations, only use cable glands or conduit entry d evices ce r tified Explosi ...

  • Emerson 00825-0100-4530 Rev EC - page 10

    March 2013 10 Quick Installati on Guide St ep 3 c ontinued... HART c ommunication The Rosemount 53 00 Series transmit ter operates with a power supply rangin g from 16 - 42.4 Vdc (16 - 30 Vdc in IS ap plications, 20- 42.4 Vdc in Explosi on-proof / Flameproof appl ications and in Non-Sp arking / Energy Limited appl ications). All configuration tools ...

  • Emerson 00825-0100-4530 Rev EC - page 11

    Quick Installat ion Guide 11 March 2013 St ep 3 c ontin ued... T ype n approvals : non-sparking / energ y limited pow er supply T ransient protection terminal block Load Resistance 250  Power Supply HART Modem Field Communicator PC Rosemount 5300 Series Tr a n s m i t t e r HART: U n = 42.4 V Power Supply Load Resistance 250  PC HART Modem Fi ...

  • Emerson 00825-0100-4530 Rev EC - page 12

    March 2013 12 Quick Installati on Guide St ep 3 c ontin ued... Load l imitations The Field Commu nicator require s a minimum load resist ance of 250  wi thin the loop to function properly . The maximum load resistan ce can be obtain ed from the following dia grams. NOT E: For Flameproo f / Explosion-proof inst allations, the diagram is only vali ...

  • Emerson 00825-0100-4530 Rev EC - page 13

    Quick Installat ion Guide 13 March 2013 St ep 3 c ontin ued... F OUND ATION fie ldbus The Rosemount 5300 Series transmitter, F OUNDATION fieldbus version, operates with a power sup ply ranging from 9 - 32 Vd c (9 - 30 Vdc in IS applicatio ns and 16 - 32 Vdc in Explosion-p roof / Flameproof and in Non -Sparking / Energy Limited application s). FISCO ...

  • Emerson 00825-0100-4530 Rev EC - page 14

    March 2013 14 Quick Installati on Guide St ep 3 c ontin ued... T ype n approvals : non-sparking / energy limited po wer supply RS-485 with Modbu s communica tion The 5300 Series RS-48 5 with Modbus communication tran smitter version operates using a power supply rangin g from 8 - 30 Vdc ( max. rating). See the Rosemount 5300/54 00 Series with HART ...

  • Emerson 00825-0100-4530 Rev EC - page 15

    Quick Installat ion Guide 15 March 2013 St ep 4: Configure NOTE: If the transmitter is pre-c onfigured at the factor y, it is only nec essary to proceed with the follo wing steps if you need to ve r if y or change the settings. Basic configuration c an easily be done either with Rosemount Radar Master, a Field Communica tor, the AMS™ Suite, Delt ...

  • Emerson 00825-0100-4530 Rev EC - page 16

    March 2013 16 Quick Installati on Guide Configuration using the R osem ount Radar Master sof twa r e 1. Start Ro semoun t Radar Mast er ( Programs > Ro sem ount > Ro semo unt R adar Master ). 2. Connect to the desired transmitter . Once the transmit ter is c onnec ted, the Guided Setup win dow app ears au tom atica lly . 3. Click the Run Wiza ...

  • Emerson 00825-0100-4530 Rev EC - page 17

    Quick Installat ion Guide 17 March 2013 are norm ally c onfi gured at the f actor y , but can be c hang ed if , for exampl e, t he probe is cut in the fi eld, or if disturbi ng objects in the near zone need to be block ed out ( Hold Off Distanc e/Uppe r Null Z one (UN Z)). Handheld HAR T Communica tor: F ast K ey Seque nce [2, 1, 2]. F OUND ATION f ...

  • Emerson 00825-0100-4530 Rev EC - page 18

    March 2013 18 Quick Installati on Guide Click Nex t and the following window appears (T ank Environment). 8. In the Environment window , select Measurement Mode . If the sur face is m ov i ng u p o r d o w n a t ra t e s o ve r 4 0 m m / s (1 . 5 i n . /s ) , t h e Rapid Le vel Changes box sh ould also be s elected. En ter the Upper Produc t Dielec ...

  • Emerson 00825-0100-4530 Rev EC - page 19

    Quick Installat ion Guide 19 March 2013 the available pre-defined tank options, or if high volume accurac y is desired. Choose None if volume calculation is not desired. Handheld HART C ommunicator: F ast Ke y Sequenc e [2, 1, 5] F OUND ATION fieldbu s paramet ers: TRANSDUCER_1300 > VOL_ VO LU ME _ C A LC_ M E TH O D TRANSDUCER_1300 > V OL_ID ...

  • Emerson 00825-0100-4530 Rev EC - page 20

    March 2013 20 Quick Installati on Guide 12. The Basic Configurat ion with the Radar Maste r Wizard is now finished. Proceed with the Device Specific Setup to see which additional configuration is needed. Y ou may be required to calibrate V apor Compensa tion, to set up Probe End Projec tion, or to per form a T r im Near Zone de pending on t ype of ...

  • Emerson 00825-0100-4530 Rev EC - page 21

    Quick Installat ion Guide 21 March 2013 Safet y Instrumented Systems (4-20 mA only) The following sec tion is applicable to th e Rosemount 5300 Prio r-Use option (Special certi fication: QS). Ad ditional Safety In strumented Systems informati on is available in the Rose mount 5300 Series Reference Manual (Document No. 00809-010 0-4530). The m anual ...

  • Emerson 00825-0100-4530 Rev EC - page 22

    March 2013 22 Quick Installati on Guide Damping User adjusted damping affects the transm itter’s ability to respond to proces s changes. Therefore, th e damping values + response time should not exceed the Safety loop requirem ents. Alarm and saturation lev els DCS or safety logic solver should be configured to ha ndle both High alarm and Low ala ...

  • Emerson 00825-0100-4530 Rev EC - page 23

    Quick Installat ion Guide 23 March 2013 Site acceptance After the installa tion and configura tion, proper operat ion of the transmitte r should be verified. A site acceptance test is th erefore recommended. The proof test outlined in this sect ion can be used for this. Operation and main ten a nce The Rosemount 5300 Series Prior-Use opti on must b ...

  • Emerson 00825-0100-4530 Rev EC - page 24

    March 2013 24 Quick Installati on Guide 6. Enable write protec tion. 7. Restore the loop to full operation. 8. Remo ve the bypa ss from the sa f ety logic solver or o ther wise restore normal operation. 9. Docu ment the test res ult for f uture reference . Inspec tion Visual inspection It is recommended to inspect th e probe for possible build up o ...

  • Emerson 00825-0100-4530 Rev EC - page 25

    Quick Installat ion Guide 25 March 2013 Product cer tifications EU c onf ormit y The EC declaration of c onformity can be found on page 33 . The most recent revision of the EC declaration of conformity can be found at www.rosemount.com . Saf et y Instrume nt ed Syste ms (SI S) The Rosemount 53 00 Series has been e valuated by a th ird party, Exida, ...

  • Emerson 00825-0100-4530 Rev EC - page 26

    March 2013 26 Quick Installati on Guide I5, IE 1 Intrinsically safe and FISCO model: Intrinsically Sa fe f or Cla ss I, II, III, Div . 1, Groups A, B, C, D, E, F , and G, Cla ss I, Zone 0, AEx i a IIC T4 when installed per Con trol Drawing: 9240 030-936. Non-Incendive Class I, Div. 2, Groups A, B, C, D, F , and G; Suitable for Cla ss II, III, Div . ...

  • Emerson 00825-0100-4530 Rev EC - page 27

    Quick Installat ion Guide 27 March 2013 European certifications A TE X appro vals Special conditions for safe us e (X) The intrinsically safe c ircuits do not withstand the 500 V AC test as specified in IE C 60079-11 clause 6.4.12. Impact and fric tion hazards need to be considered acc ording to EN 60079-0 cl ause 8.1.2 when the transmitter and par ...

  • Emerson 00825-0100-4530 Rev EC - page 28

    March 2013 28 Quick Installati on Guide Brazilian c ertifications INMETRO approv als Special conditions for safe use (X) Letter X in the number of the cer tificate indicates the following special condition(s) for safe use:  For models 530xFxxxxxxxxxE1..., 530xFxxxxxxxxx KA..., 530 xFxxxxxxxxxKB... or 530xFxxxxxxxxxKC... and when the sensor area ...

  • Emerson 00825-0100-4530 Rev EC - page 29

    Quick Installat ion Guide 29 March 2013 I2 1 Intrinsical ly safe : 4-20 mA/HART model : Ex ia IIC T4 Ga Ex ta IIIC T79 °C -50 °C < T a < +70 °C U i : 30 V , I i : 130 mA, P i : 1.0 W , L i : 0 μ H, C i : 7.26 nF F OUNDA TION fieldbu s model : Ex ia IIC T4 Ga Ex ta IIIC T69 °C -50 °C < T a < +60 °C U i : 30 V , I i : 300 mA, P i : ...

  • Emerson 00825-0100-4530 Rev EC - page 30

    March 2013 30 Quick Installati on Guide IC 1 F OUNDAT ION fieldbus FISCO model: Ex ia IIC T 4 (-50 °C < T a < +60 °C) DIP A20 T A 69 °C U i = 17.5 V , I i = 380 mA, P i = 5.32 W , C i  4.95 nF , L i  0.1 μ H N3 T yp e n: HART model : Ex nL IIC T4 (-50 °C < T a < +70 °C) U i = 30 V , I i = 130 mA , P i = 1.0 W , C i ...

  • Emerson 00825-0100-4530 Rev EC - page 31

    Quick Installat ion Guide 31 March 2013 IE CEx certifications IECEx appro vals Special conditions for safe us e (X) The intrinsically safe circuits do not withstand the 500 V AC test as spec ified in IEC 60079-11 clause 6.4.12. Impact and fric tion hazards need to be c onsidered acc ording to EN 60079-0 clau se 8.1.2 when the transm itte r and pa r ...

  • Emerson 00825-0100-4530 Rev EC - page 32

    March 2013 32 Quick Installati on Guide Other certifications Ove r fill protectio n Cert. no: Z-65.16-476 U1 TÜV-tested and approved by DIBt for ove r fill protection according to the German WHG regulations Approval valid for HART and F OU NDATION fie ldbu s op tions. Suitabilit y for intend ed use Compliant with NAMUR NE 95, ve rsion 07.07.2006 ? ...

  • Emerson 00825-0100-4530 Rev EC - page 33

    Quick Installat ion Guide 33 March 2013 E C Declaration of Conformit y Figure 1. EC Dec laration of Conf ormity - page 1 ...

  • Emerson 00825-0100-4530 Rev EC - page 34

    March 2013 34 Quick Installati on Guide Figure 2. E C Declar ation of Conf ormity - page 2 ...

  • Emerson 00825-0100-4530 Rev EC - page 35

    Quick Installat ion Guide 35 March 2013 Figure 3. EC Dec laration of Conf ormity - page 3 ...

  • Emerson 00825-0100-4530 Rev EC - page 36

    Emerson Process Management Rosemount Me asurement 8200 Mark et Boule vard Chanha ssen , MN 55317 U SA T el (USA) 1 800 999 9307 T el (Intern ational ) +1 952 906 8888 F ax +1 952 906 88 89 Emerso n Process Management Asi a Pa c if ic Pt e L td 1 Pandan Cr esce nt Singapor e 128461 T el +65 6777 8211 F ax +65 6777 0947 Service Support Hotline: +65 6 ...

Fabbricante Emerson Categoria Satellite Radio

I documenti che otteniamo dal fabbricante del dispositivoEmerson 00825-0100-4530 Rev EC possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Emerson
- manuali per l’uso 00825-0100-4530 Rev EC
- schede prodotto Emerson
- opuscoli
- o etichette energetiche Emerson 00825-0100-4530 Rev EC
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Emerson 00825-0100-4530 Rev EC.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Emerson 00825-0100-4530 Rev EC, manuali di manutenzione, brevi manuali o manuali utente Emerson 00825-0100-4530 Rev EC. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Emerson 00825-0100-4530 Rev EC.

Manuali per l’uso simili

Manuale completo del dispositivo Emerson 00825-0100-4530 Rev EC, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Emerson 00825-0100-4530 Rev EC dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Emerson 00825-0100-4530 Rev EC.

Il manuale per l’uso completo Emerson, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Emerson 00825-0100-4530 Rev EC - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Emerson 00825-0100-4530 Rev EC, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Emerson 00825-0100-4530 Rev EC che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Emerson 00825-0100-4530 Rev EC - che ci dovrebbe aiutare nei primi passi durante l'uso Emerson 00825-0100-4530 Rev EC
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Emerson 00825-0100-4530 Rev EC
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Emerson 00825-0100-4530 Rev EC in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Emerson 00825-0100-4530 Rev EC?

Utilizza il modulo sottostante

Se non hai risolto il problema con Emerson 00825-0100-4530 Rev EC con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Emerson 00825-0100-4530 Rev EC è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)