Italiano dropdown-ico

Manuale per l’uso Quatech DSP-100

40 pagine 0.64 mb
Scarica

Vai alla pagina of 40

Summary
  • Quatech DSP-100 - page 1

    DSP-100 Dual Channel RS-232 PCMCIA Asynchronous Adapter for PCMCIA Card Standard compatible machines User's Manual QUATECH, INC. TEL: (330) 434-3154 5675 Hudson Industrial Parkway FAX: (330) 434-1409 Hudson, Ohio 44236 www.quatech.com INTERFACE CARDS FOR IBM PC/AT AND PS/2 ...

  • Quatech DSP-100 - page 2

    Warranty Information Quatech Inc. w arran ts th e DSP-100 to be free of defects f or one (5) year f rom the date of purch ase. Qu atech Inc. w ill repair or replace any adapter that fails to perform un der normal operating conditions and in accordance w ith the procedures outlined in this docum ent during the w arranty period. Any damage that resul ...

  • Quatech DSP-100 - page 3

    Declaration of Conformity Manufacturer's Name: Quatech, Inc. Manufacturer's Address: 662 Wolf Ledges Parkway Akron, OH 44311 (USA) Application of Council Directive: 89/336/EEC Standards to which Conformity is Declared: * EN50081-1 (EN55022) * EN50082-1 (IEC 801-2, IEC 801-3, & IEC 801-4) Type of Equipment: Information Technology Equip ...

  • Quatech DSP-100 - page 4

    Table of Contents 7-2 Specifications .......................................................... 6-1 External Connections .................................................. 5-2 Installing DSP-100 ...................................................... 5-2 Windows NT ........................................................... 4-7 Changing Resource Set ...

  • Quatech DSP-100 - page 5

    1. Introduction The DSP-100 is a dual channel RS-232 asynchronous serial adapter for systems equipped with PCMCIA Type II and/or Type III expansion sockets. The DSP-100 is a PCMCIA Type II (5 mm) card and is PCMCIA PC Card Standard Specification 2.1 compliant . The DSP-100's serial port is implemented using two 16C750 Universal Asy nchronous R ...

  • Quatech DSP-100 - page 6

    This page intentionally left blank. 2-1 DSP-100 (Rev. G and later) User’s Manual ...

  • Quatech DSP-100 - page 7

    2. DOS/Windows 3.x Note: Quatech PCMCIA DOS support is dependent upon type of machine and card and socket services software support. DOS support is not guaranteed. Two configuration software prog rams are provided with the DSP- 100: a Client Driver, and a card Enabler. Both of these programs are ex ecute d from DOS (before entering Windows) and all ...

  • Quatech DSP-100 - page 8

    2.1 DSP-100 Client Driver for DOS I n order to use the DSP-100 Client Driver, the sy stem must be configured with Card and Socket Services software. Card and So cket Services software is not provided with the DSP-100 but is available from Quatech . IMPORTANT: Some versions of Card and So cket Services dated before 1993 do not support general purpos ...

  • Quatech DSP-100 - page 9

    from the system as desired. On each insertion int o the P CMCIA socket, the DSP-100 will be automatically reconfigured according to the command line options. 2.1.2 Command Line Options The DSP-100 Client Driver accepts up to ei ght command line arguments from the user to determine the configuration of theDSP-100. I f any arguments are provided, the ...

  • Quatech DSP-100 - page 10

    2.1.2.2 Example 2 DEVICE = C: DSP-100DSP130CL.SYS (b290,i11) I n example 2, a single c ommand line arg ument is provided. The Client Driver will attempt to configure a DSP-100 inserted into any socket with a base address of 290H and IRQ 11. I f address 290H or IRQ 11 is unavailable, the DSP-100 will not be configured. 2.1.2.3 Example 3 DEVICE = C ...

  • Quatech DSP-100 - page 11

    2.1.2.6 Example 6 DEVICE = C: DSP-100DSP130CL.SYS (b300,i5) ( ) (i10) I n exam ple 6, the three command lin e arguments of example 5 have been rearranged. The Client Driver will first attempt to conf igure a DSP-100 inserted into any socket with a base address of 300H and I RQ 5. If address 300H or I RQ 5 is unava ilable, the Client Driver will p ...

  • Quatech DSP-100 - page 12

    Available Resources: One function of the Card and Socket Services software is to track which sy stem resources (memory addresses, I /O addresses, IRQs, etc.) ar e avail able for assignment to i nserted PCMCIA cards. Sometime s, however, the Card Se rvices softwa re assumes or incorrectly determines that a particular resource is used when i t is act ...

  • Quatech DSP-100 - page 13

    The DSP-100 Enabler does not support automatic c onfiguration of adapters upon insertion, more commonly referred to a s "Hot Swapping ". This mea ns the adapter must be insta lled in one of the sy stem's PCMCIA sockets before executing D SP130EN.EXE. I f more than one adapter is installed in a system, the Enabler must be executed sep ...

  • Quatech DSP-100 - page 14

    W address specifies the base address of the memo ry window required to config ure theDSP-100. Set address = D0 for a memory window at segment D000, address = D8 for a memory window at segment D800, etc. Valid settings for address are C8, CC, D0, D4, D8, and DC. If this option is o mitted, a memory window at segment D000 will be used. Before removin ...

  • Quatech DSP-100 - page 15

    2.2.1.5 Example 5 DSP130EN.EXE (o1,i5,b340,s1) I n example 2, the Enabler will configure the D SP-100 in socket 1 with a base address of 340H and IRQ 5 using a configuration memory window at segment D000. 2.2.1.6 Example 6 DSP130EN.EXE (s0,b300,i5,r) I n example 6, the Enabler will release the config ur ation used by the DSP-100 in socket 0 using a ...

  • Quatech DSP-100 - page 16

    Card and Socket Services Software: I n order to use the DSP-100 Enabler for DOS, th e sy stem MUST NOT be configured with Card and Socket Services software. If a Card and So cket Services software is inst alled, th e Enabler may interfere with its operation and with the device( s) it controls. For sy stems configured with Card and Socket Services, ...

  • Quatech DSP-100 - page 17

    3. Windows 95/98/Millennium (ME ) To allow easy config uration of the DSP-100, a Windows 95/98/ME "I NF" c onfiguration file has been written for the hardware. 3.1 Installing a DSP-100 Under Windows 95/98/ME 1. Insert the DSP-100 into any available PC Card socket. 2. The first time a new PC Card type is installed the New Hardware Found wi ...

  • Quatech DSP-100 - page 18

    To view and/or edit hardware devices in Windows 95/98/ME use the system Device Manager . To access Device Manager double click the System icon in the Windows 95/98/ME control panel, or click the My Computer icon on the Windows 95/98/ME desktop with the right mouse button and select Properties from the pull down menu. Consult Windows 95/98/ME on-lin ...

  • Quatech DSP-100 - page 19

    5. Several predefined Basic Configurations have been included for the DSP-100 (see Figure 5. DSP-100 Basic Configuration Table). The Basic Configurations provide many combinations of the operating modes and options listed below. See the Hardware Information section of this manual for complete descriptions. When the Use Automatic Settings check box ...

  • Quatech DSP-100 - page 20

    Base I/O Address Resource Modification Not Allowed: The DSP-100 is configured to allow only a fixed number of base I/O addresses. To change the I/O address resources for the DSP-100 select another “Basic Configuration”. Refer to the Basic Configurations table for a list of the availabe I/O address resources for the DSP-100 . 3-4 DSP-100 (Rev. G ...

  • Quatech DSP-100 - page 21

    4 Windows 2000 To allow easy configuration of the DSP-100, a Windows 2000 "INF" configuration file has been written for the hardware. 4.1 Installing a DSP-100 Under Windows 2000. 1. Insert the Quatech COM CD into an available CD-ROM. 2. Insert the DSP-100 into any available PC Card socket. 3. You will be prompted to search for the correct ...

  • Quatech DSP-100 - page 22

    4. Double click ‘Serial Port Adapters’ 5. Double click ‘Drivers’ 4-2 DSP-100 (Rev. G and later) User’s Manual ...

  • Quatech DSP-100 - page 23

    6. Double click on ‘Windows 2000, XP, for PCI, PCMCIA, ISA’ 7. Click on ‘qserbrd’ and select open Windows 2000 4-3 ...

  • Quatech DSP-100 - page 24

    8. Select ‘OK’ at the ‘Files Needed’ window 9. The same process as above in steps 1-9 will apply for the next file ‘qserpt.inf’. In step 7 be sure to choose ‘qserpt.inf’ and select ‘Open’. 4.2 DSP-100 Resource Settings in Windows 2000 Windows 2000 maintains a registry of a ll known hardware installed within the computer. Inside ...

  • Quatech DSP-100 - page 25

    Windows 2000 handles the DSP-100 as a "parent/child device". v The DSP-100 is the "parent device" and is listed under the hardware class Quatech Multiport Serial Devices in the device manager. v Each serial port is a "child device" of the "parent device" DSP-100 (Quatech PCMCIA Serial Port). There are 2 child ...

  • Quatech DSP-100 - page 26

    4.2.1 Viewing Resource Settings with Device Manager 1. Start the Windows 2000 Device Manager . 2. Double click on the hardware class Quatech Multiport Serial Devices to list hardware devices in the class. 3. The DSP-100 “parent device” belongs to this hardware class. The device name for the DSP-100 is Quatech DSP-100 PCMCIA Two-Port RS-232 Seri ...

  • Quatech DSP-100 - page 27

    6. Use the COM Port device names (COM5, COM6, etc.) to access any of the particular serial ports on the DSP-100. This name is required by a Windows 2000 application when accessing a particular port . 4.2.2 Changing Resource Settings with Device Manager 1. Start the Windows 2000 Device Manager . 2. Double click on the hardware class Quatech Multipor ...

  • Quatech DSP-100 - page 28

    4-8 DSP-100 (Rev. G and later) User’s Manual ...

  • Quatech DSP-100 - page 29

    The X8 clock mode locks the ports hardware clock at eight times the standard rate. The baud rate the port runs at will always be eight times the rate requested by the application. This mode is useful for legacy applications which cannot request baud rates over 115.200. 921,600 X8 The X4 clock mode locks the ports hardware clock at four times the st ...

  • Quatech DSP-100 - page 30

    Scratch Pad 1x Memory Mapped 0004 Scratch Pad 8x Any 0003 Scratch Pad Normal Any 0002 ISR 8x Any 0001 ISR Normal Any 0000 Scratch Pad/ ISR Clock Speed I/O Range*** Basic Configuration *** Any indicates variable value; this value may or may not be user selectable depending on platform. 6. Select a Basic Configurations that displays "No conflict ...

  • Quatech DSP-100 - page 31

    7. Windows 2000 should have chosen an available Interrupt Request setting automatically when the I/O address range was configured by a Basic Configuration selection. This default Interrupt Request setting should not need changed as long as "No conflicts" is displayed in the bottom display region titled Conflicting Device List . If you are ...

  • Quatech DSP-100 - page 32

    This page intentionally left blank. 5-1 DSP-100 (Rev. G and later) User’s Manual ...

  • Quatech DSP-100 - page 33

    5 Windows NT 5.1 Installing DSP-100 To allow easy configuration of the DSP-100 the Quatech Device Manager for Windows NT has been written for the hardware. This configuration util ity supports the DSP-100 only in block addressing mode. To begin the installation, open Windows Explorer and search for the ‘Setup.exe’ command to install the Quatech ...

  • Quatech DSP-100 - page 34

    1. Locate and double click the Quatech Device Manager icon on the desktop Device Manager Icon on Desktop 2. Click the ‘Add’ button at the bottom of the Quatech Device Manager Window 5-3 DSP-100 (Rev. G and later) User’s Manual ...

  • Quatech DSP-100 - page 35

    3. Follow the steps for the ‘Add Quatech Hardware Wizard’. Windows NT 5-4 ...

  • Quatech DSP-100 - page 36

    4. Complete the final steps of the installation, shut down Windows NT insert the PCMCIA Card and re-boot the computer. Additional help is available online The DSP-100 PC Card should now be configured. In the future, Windows NT will automatically recognize and configure the DSP-100. Note: Windows NT does not support ‘Plug and Play ’ for PCMCIA c ...

  • Quatech DSP-100 - page 37

    6. External Connections An adapter cable is included with the DSP-100 to convert the 9-pin PCMCIA output connector into a standa rd D-9 male conn ector, data terminal equipment (DTE), as shown in the fig ures below. Standard D-9 (Male) Figure 14. DSP-100 Adapter Cable. D-9 M ale Conne ctor GND DTR TxD RxD DCD RI CTS RTS DSR 5 4 3 2 1 6 7 8 9 Figure ...

  • Quatech DSP-100 - page 38

    This page intentionally left blank. 7-1 DSP-100 (Rev. G and later) User’s Manual ...

  • Quatech DSP-100 - page 39

    7. Specifications Bus Interface PCMCIA PC Card Standard 2.1 compliant Physical Dimensions Type II PCMCIA card (5mm) Maximum Baud Rate 921.6K Power Requirements +5 volts 30 mA (typical) 45 mA (maximum) Connector Adapter to two standard male D-9 Specifications 7-2 ...

  • Quatech DSP-100 - page 40

    DSP-100 User's Manual Revision 3.12 May 2002 P/N 940-0088-312 Quatech, Inc. ...

Fabbricante Quatech Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoQuatech DSP-100 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Quatech
- manuali per l’uso DSP-100
- schede prodotto Quatech
- opuscoli
- o etichette energetiche Quatech DSP-100
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Quatech DSP-100.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Quatech DSP-100, manuali di manutenzione, brevi manuali o manuali utente Quatech DSP-100. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Quatech DSP-100.

Manuali per l’uso simili

Manuale completo del dispositivo Quatech DSP-100, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Quatech DSP-100 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Quatech DSP-100.

Il manuale per l’uso completo Quatech, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Quatech DSP-100 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Quatech DSP-100, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Quatech DSP-100 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Quatech DSP-100 - che ci dovrebbe aiutare nei primi passi durante l'uso Quatech DSP-100
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Quatech DSP-100
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Quatech DSP-100 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Quatech DSP-100?

Utilizza il modulo sottostante

Se non hai risolto il problema con Quatech DSP-100 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Quatech DSP-100 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)