Manuale per l’uso Cavalry CAND-T02

44 pagine Non applicabile
Scarica

Vai alla pagina of 44

Summary
  • Cavalry CAND-T02 - page 1

    CAND Series User ’ s Guide Network Attached Storage ...

  • Cavalry CAND-T02 - page 2

    ...

  • Cavalry CAND-T02 - page 3

    ...

  • Cavalry CAND-T02 - page 4

    4 T able of C ontents 4 T ABLE OF C ONTENTS INTRODUCTION 6 Featur es 6 Accessories 7 Conven tions & Safety Instructions QUICK ST ART 11 Mapping 11 Web-based GUI 12 Printer 12 IP Address 12 FTP Service COMPLETE USER’S GUIDE Chapter 1 - Basics 1.1 - Quick Setup 15 1.1.1 - Wizard 16 1.1.2 - Add User 17 1.1.3 - Add Group 18 1.1.4 - Add Share Chap ...

  • Cavalry CAND-T02 - page 5

    5 27 2.3.2 - Time Settings 27 2.3.3 - T urn O 28 2.3.4 - Information 28 2.3.5 - Disk Usage 29 2.3.6 - Error Notication 2.4 Network Service 30 2.4.1 - DHCP Server 31 2.4.2 - Bonjour 2.5 Maintenance 32 2.5.1 - Disk Utility 33 2.5.2 - RAID Settings 34 2.5.3 - Firmw are Upgrade 34 2.5.4 - Save Conguration 34 2.5.5 - Restore Conguration 34 2 ...

  • Cavalry CAND-T02 - page 6

    6 Introduction Featur es • 10/100/100 Mbit/s LAN Speed • Printer server capability with USB 2.0 • Precongur ed to RAID 1 • Pref ormatted to ext3 • Supports RAID 0, RAID 1, Spanning, and JBOD • Supports ext 2, ex t 3, F A T32 ( JBOD only) formatting • Supports FTP/SMB ser ver • Supports UPnP Protocol • ...

  • Cavalry CAND-T02 - page 7

    7 Conv entions & Safety Instructions CAUTION: This symbol is to r emind you to pay attention and r ead carefully. F ailur e to do so could result in injury or data loss. NOTE: This symbol is used to pr ovide you with useful information. • Read through this entire manual and sav e for future refer ence. • Place unit in a secure locatio ...

  • Cavalry CAND-T02 - page 8

    8 ...

  • Cavalry CAND-T02 - page 9

    9 Quick Star t Guide This portion of the manual gives a brief overview of the steps required to start transferring les. It also goes over the main features and functions of the NAS drive such as attaching a printer and determining the unit’ s IP address. Advanced congura tion of formatting and RAID settings are not required t o use the unit ...

  • Cavalry CAND-T02 - page 10

    10 Quick Star t NOTE: F or optimal security and convenience , we recommend designating a single computer to handle all congurations . 1. Connect the power adapter to the NAS. Then plug the adapter int o an electrical outlet. 2. T urn on the power; the “P ower” LED light will indica te the unit is on. 3. Insert the Ethernet cable to the LAN p ...

  • Cavalry CAND-T02 - page 11

    11 Mapping Windows XP Users 1. Go to “ My Network Places” , then click on “Entire Network” in the lef t hand panel. 2. Go to “Microsoft Window s Network ” >> “ W orkgroup” >> “Ca valry ” 3. Find and right-click “public” then click on “Map Network Drive... ” 4. In the new window , designate a Drive Letter and ...

  • Cavalry CAND-T02 - page 12

    12 Printer (optional) 1. Attach a network-capable printer to the NAS with the USB cable. 2. Refer to your printer settings t o properly congure it to the system. NOTE : GDI/Host-based print ers are not supported. IP Address (optional) 1. T o nd the IP address of the NAS unit, go to the command prompt - “ cmd” in Run. 2. T ype “ping cava ...

  • Cavalry CAND-T02 - page 13

    13 Complet e User ’ s Guide The remainder of this manual is optional and gives a mor e thorough guide to the featur es oered. A higher lev el of networking experience may be required for some of the more advanced fea tures. The following thr ee chapters corresponds to a menu item located on the top of the web-based GUI. Instructions to access ...

  • Cavalry CAND-T02 - page 14

    14 ...

  • Cavalry CAND-T02 - page 15

    15 Chapter 1 Basics 1.1 Quick Setup Click on “Quick Setup” on the lef t of the GUI to open a sub-menu. See the “Quick Start ” section for instructions on how to access the GUI. 1.1.1 Wizard 1.1.2 Add User 1.1.3 Add Group 1.1.4 Add Share 1.1.1 Wizard Follo w the on screen instructions to complete the following steps: • Pref erence Langu ...

  • Cavalry CAND-T02 - page 16

    16 1.1.2 Add User Step 1. Add user name and passwor d • Enter a new user name and password . ( T o simply create a new user with default settings, enter the username and passwor d in the rst step then click “Next ” then click “Next ” through the remaining 2 steps.) • Designate a shared folder b y checking the “Cr eate Shared ...

  • Cavalry CAND-T02 - page 17

    17 Step 3. Share P ermission - Grant users access to existing gr oup-shares. A group-share is a location in the NAS where multiple users can view and/or edit les. • Choose any existing group-share(s) to g rant users access to , and click “Read Only” or “ Writable ” . The g roup-share will move to the “ Access Granted” column wit ...

  • Cavalry CAND-T02 - page 18

    18 Step 3. Give a group ac cess to existing group-shares • Choose any existing group-share(s) to g rant access to , and click “Read Only ” or “Writable” . The group-share will move to the “ Access Granted” column with the chosen permissions. “Read Only ” will allow the group to access les in the g roup- share but will not be ...

  • Cavalry CAND-T02 - page 19

    19 Step 2. Grant users and/or groups ac cess to the share • Click on a user or group (groups ar e denoted by the “@” prex) in the “ Access Denied” column and click either “Read Only ” or “Writable” to move the user to the “ Access Granted” column. • T o remove a user or group , choose a user or group and click “Re ...

  • Cavalry CAND-T02 - page 20

    20 ...

  • Cavalry CAND-T02 - page 21

    21 Chapter 2 Contr ol P anel 2.1 Users and Groups 2.1.1 User Management 2.1.2 Group Management 2.1.1 User Management T o add a new user : • T o add a new user, type a new name in the “User Name” eld • Enter a password and r etype to conrm. • Check the “Create Shared priva te Folder” box to create a personal f older for ...

  • Cavalry CAND-T02 - page 22

    22 2.1.2 Group Management T o add a new group: • T o add a new user, type a new name in the “Group Name ” eld • Click “Save” . T o edit an existing group • Choose an “ existing group ” from the list. • T o add members to this group, click “Members” and follow section 1.1.3 • T o delete a group, choose an ...

  • Cavalry CAND-T02 - page 23

    23 2.2 F ile and Print 2.2.1 File Server 2.2.2 Share Management 2.2.3 Printer Server 2.2.1 File Server • Change the character set of the NAS to one appropriate for y our region. • Check the Windows Setting box (checked by default) t o enable the NAS to be on a Windows workgr oup network. • FTP capability is enabled by default. Unchec ...

  • Cavalry CAND-T02 - page 24

    24 2.2.2 Share Management Grant users and/or groups acc ess to the share • Choose an existing share from the list and click on “Windows, FTP Ac cess” or “NFS Access ” to congure preferred ac cess method settings. • Windows , FTP Access (FTP must be enabled. See 2.2.1) • Click on a user or group (groups ar e denoted by the ...

  • Cavalry CAND-T02 - page 25

    25 • NFS Access • Enter either an IP address or an IP subnet to gr ant access to. • Click on “ Add” to allow the IP address/subnet access t o the NFS. • T o remove, click on the IP address/subnet on the left and click on “Remove” • Alternatively , check “Grant access t o all” to give all IP address/ subnet full ...

  • Cavalry CAND-T02 - page 26

    26 2.3 System 2.3.1 LAN Settings 2.3.2 Time Settings 2.3.3 T urn O 2.3.4 Information 2.3.5 Disk Usage 2.3.6 Error Notication 2.3.1 LAN Settings • Select “Obtain IP Address automatically” and “Obtain DNS Server Address auto- matically” ( These default settings are r ecommended and appropriate for most cases). If unsure, contact th ...

  • Cavalry CAND-T02 - page 27

    27 2.3.2 Time Settings Adjust the NAS internal clock to the local time manually or automatically • Manually change the date, time and time zone. • Click “Save” • Automatically change the time through a Network Time Protocol Server (NTP Server). • Select your time zone then choose one of the default NTP Servers (requires inte ...

  • Cavalry CAND-T02 - page 28

    28 2.3.4 Information Displays the system inf ormation and the IP address of the NAS unit. • Use the IP address when mapping / mounting the drive ont o the computer . (See the Quick Start sec tion) 2.3.5 Disk Usage Displays the amount of disk space used / remaining • View by summary or by individual users. ...

  • Cavalry CAND-T02 - page 29

    29 2.3.6 Error Notication Send error / malfunction notication email. • Check the boxes of the warnings y ou wish to recieve. • Enter the SMTP server address to set up an email service. • Click “Send T est Email” to verify the email ser vice works. • Contact your email service provider for assistance . ...

  • Cavalry CAND-T02 - page 30

    30 2.4 Network Ser vice 2.4.1 DHCP Server 2.4.2 Bonjour 2.4.1 DHCP Ser ver • Check “Enable Ser ver” to allow the NAS to act as a DHCP ser ver . (Only on a LAN without an existing DHCP server) • Optional settings (rst red box) - mainly used is the NAS is not being used as a DHCP server . Set these settings to conform to customized L ...

  • Cavalry CAND-T02 - page 31

    31 2.4.2 Bonjour Enable Bonjour to connect network devices and applications and access shared music in iT unes • Enable / Disable the Bonjour function by checking the box. • Click on “iT unes enable” to allow iTunes to ac cess shared music. • Access the NAS volume fr om your computer and creat e a folder called “music” under ...

  • Cavalry CAND-T02 - page 32

    32 2.5 Maintenance 2.5.1 Disk Utility 2.5.2 RAID Setting 2.5.3 Firmw are Upgrade 2.5.4 Save Conguration 2.5.5 Restore Conguration 2.5.6 F actor y Reset 2.5.7 Software Update 2.5.1 Disk Utility View the status of and ref ormat the individual hard drives. (Only use this utility f or JBOD congurations) • T o reformat, choose from the dro ...

  • Cavalry CAND-T02 - page 33

    33 2.5.2 RAID Settings View or change current RAID congura tions • RAID level and File sy stem information is displayed • The “RAID Size” shows the total usable capacity of the NAS (e.g . RAID 1 is mirrored so half of the total capacity is usable) • T o change the RAID conguration, click on “R emove raid sy stem” then c ...

  • Cavalry CAND-T02 - page 34

    34 2.5.3 Firm ware Upgrade Update the NAS rmware • Check if the “Current F irmware V ersion” is the most recent by visiting the Cavalry website: www.cavalrystorage.c om >> Suppor t >> Downloads • If there is a newer version, download it to y our computer . • Click on “Choose File ” to browse for and select the ...

  • Cavalry CAND-T02 - page 35

    35 2.6 Log F ile 2.6.1 Samba Log 2.6.2 FTP Log 2.6.3 DHCP Log 2.6.4 System Log 2.6.5 Administration Log 2.6.1 - 2.6.5 Logs • View the respective logs f or detailed activit y information. • Click on “Clean” to clear the logs. ...

  • Cavalry CAND-T02 - page 36

    36 ...

  • Cavalry CAND-T02 - page 37

    37 Chapter 3 P ersonal Information 3.1 Personal Inf ormation 3.1.1 Account 3.1.1 Accoun t • Change password, language pr eferences, and ac count description. • View Disk Usage Share membership . • Click “Save” . ...

  • Cavalry CAND-T02 - page 38

    38 ...

  • Cavalry CAND-T02 - page 39

    39 Chapter 4 Help F A Q and T roubleshooting 4.1 Q: Why can ’t I access the NAS setup page? A: Please connect the NAS directly to your computer via the RJ45 port. Open a web browser and key in the default IP address 192.168.1.1 Then type “ admin” for both Ac- count Name and P assword to enter the NAS setup page. 4.2 Q: Why can ’t I perform ...

  • Cavalry CAND-T02 - page 40

    40 4.7 Q: Why can ’t Windows XP ent er the SMB folder with a password via the NAS? A: Please update Windows XP t o SP2 or higher . 4.8 Q: What is the NAS default login name and password? A: The default Login name: “admin” , default password: “ admin” . 4.9 Q: How do I access the NAS via the Internet? A: If your NAS is using a public IP , ...

  • Cavalry CAND-T02 - page 41

    41 4.14 Q: What is the protocol of network le sharing syst em using by the NAS? A: The NAS has the built-in Samba Server for le sharing; it is using a SMB (Server Mes- sage Block) protocol to int egrate TCP/IP , NE TBUEI and IPX/SP X protocol. In other words , if the client PC can support T CP/IP , NETBUEI or IPX/SPX, it will also be compatib ...

  • Cavalry CAND-T02 - page 42

    ...

  • Cavalry CAND-T02 - page 43

    Copyright © 2010 Cavalry Storage, Inc. All rights reserved. Cavalry , the names of series and the Cavalry logo are registered trademarks of Cavalry Storage. All other trademarks or register ed trademarks are the property of their respective owners. When referring to hard drive ca- pacity, one gigab yte, or GB, equals one billion bytes and one tera ...

  • Cavalry CAND-T02 - page 44

    CAND Series 20100318 v1.3 ...

Fabbricante Cavalry Categoria Server

I documenti che otteniamo dal fabbricante del dispositivoCavalry CAND-T02 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Cavalry
- manuali per l’uso CAND-T02
- schede prodotto Cavalry
- opuscoli
- o etichette energetiche Cavalry CAND-T02
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Cavalry CAND-T02.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Cavalry CAND-T02, manuali di manutenzione, brevi manuali o manuali utente Cavalry CAND-T02. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Cavalry CAND-T02.

Manuali per l’uso simili

Manuale completo del dispositivo Cavalry CAND-T02, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Cavalry CAND-T02 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Cavalry CAND-T02.

Il manuale per l’uso completo Cavalry, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Cavalry CAND-T02 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Cavalry CAND-T02, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Cavalry CAND-T02 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Cavalry CAND-T02 - che ci dovrebbe aiutare nei primi passi durante l'uso Cavalry CAND-T02
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Cavalry CAND-T02
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Cavalry CAND-T02 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Cavalry CAND-T02?

Utilizza il modulo sottostante

Se non hai risolto il problema con Cavalry CAND-T02 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Cavalry CAND-T02 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)