Manuale per l’uso Hans Grohe Metris 31102XX1

12 pagine 1.62 mb
Scarica

Vai alla pagina of 12

Summary
  • Hans Grohe Metris 31102XX1 - page 1

    Metris 31102XX1 Metris 31103XX1 Installation Instructions / W arranty ...

  • Hans Grohe Metris 31102XX1 - page 2

    2 Installation Considerations This faucet requires a 1 1 0 V electr ical outlet which must be installed by a pr ofessional electrician in compliance with all applicable local codes. This faucet includes a transformer that must be used. Do not attemp t to hardwire t his f aucet. This faucet cannot be used with a continuous ow water heater . For b ...

  • Hans Grohe Metris 31102XX1 - page 3

    3 Installation Flush the hot and cold supplies thoroughly before install- ing this faucet. Place the faucet in the hole on the mounting surface (1). T ighten the mounting nut (2). Install the adapters and filters on the stops (3). Install the supply lines (4). Be careful not to twist the supply lines, or they may become loose from the faucet, causi ...

  • Hans Grohe Metris 31102XX1 - page 4

    4 T ur n the water on to the faucet (1). Peel the protective film from the sensor (2). W ait 15 seconds, the place a hand in front of the sensor (3). The water should turn on automatically . Model 31102 only : Pivot the temperature control lever for ward to make the water cooler (4). Model 31103 only: Set the temperature T ur n the water off at the ...

  • Hans Grohe Metris 31102XX1 - page 5

    5 Cleaning: Block the sensor for 5 seconds (1). This will turn the water off for approximately 90 seconds, so that the sink may be cleaned (2). Faucet Maintenance Reset the faucet: Remove the set screw with a 2.5 mm Allen wrench. Block the sensor for 2 seconds. W ait 10 seconds (1), then replace the set screw (2). ...

  • Hans Grohe Metris 31102XX1 - page 6

    6 W ait 15 seconds (3). Place a hand in front of the sensor (4). The water should turn on. Clean the filters and aerator If the flow of water is reduced, the aerator and/or the filters must be cleaned. T o clean the aerator: Block the sensor for 5 seconds to temporarily shut off the water (1). Unscrew and remove the vandal resistant aerator using t ...

  • Hans Grohe Metris 31102XX1 - page 7

    7 T o clean the filters: T ur n the water off at the stops. Disconnect the supply hoses from the adapters. Remove and clean the filters. Note: Remove and inspect the check valves yearly . ...

  • Hans Grohe Metris 31102XX1 - page 8

    8 Replacement Parts 1 aerator 95383000 2 solenoid valve 98854000 3 fixation set 97812000 4 connection hose 98809000 5 check valve 96456000 6 electronics 96905000 7 AC adapter 97690000 8 transformer 97689001 9 8 x 2 o-ring 98112000 Important note : the check valves should be removed and inspected yearly . 1 2 3 4 5 6 7 8 9 ...

  • Hans Grohe Metris 31102XX1 - page 9

    9 Cleaning Recommendation for Hansgrohe Pr oducts Modern lavator y faucets, kitchen faucets, and showers consist of ver y different materials to comply with the needs of the market with regard to design and functionality . T o avoid damage and returns, it is necessar y to consider certain criteria when cleaning. Cleaning Materials for Faucets and S ...

  • Hans Grohe Metris 31102XX1 - page 10

    10 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada. WHO IS COVERED BY ...

  • Hans Grohe Metris 31102XX1 - page 11

    11 give us a reasonable opportunity to correct or cure any failure to comply before you can bring any action in cour t against us under the Magnuson- Moss W arranty Act. PRODUCT INSTRUCTIONS AND QUESTIONS Upon purchase or prior to installation, please carefully inspect your Hansgrohe product for any damage or visible defect. Prior to installing, al ...

  • Hans Grohe Metris 31102XX1 - page 12

    US - Installation Instructions • Part No. 90590123 • Revised 5/2009 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgr ohe-USA.com ...

Fabbricante Hans Grohe Categoria Indoor Furnishings

I documenti che otteniamo dal fabbricante del dispositivoHans Grohe Metris 31102XX1 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Hans Grohe
- manuali per l’uso Metris 31102XX1
- schede prodotto Hans Grohe
- opuscoli
- o etichette energetiche Hans Grohe Metris 31102XX1
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Hans Grohe Metris 31102XX1.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Hans Grohe Metris 31102XX1, manuali di manutenzione, brevi manuali o manuali utente Hans Grohe Metris 31102XX1. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Hans Grohe Metris 31102XX1.

Manuali per l’uso simili

Manuale completo del dispositivo Hans Grohe Metris 31102XX1, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Hans Grohe Metris 31102XX1 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Hans Grohe Metris 31102XX1.

Il manuale per l’uso completo Hans Grohe, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Hans Grohe Metris 31102XX1 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Hans Grohe Metris 31102XX1, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Hans Grohe Metris 31102XX1 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Hans Grohe Metris 31102XX1 - che ci dovrebbe aiutare nei primi passi durante l'uso Hans Grohe Metris 31102XX1
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Hans Grohe Metris 31102XX1
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Hans Grohe Metris 31102XX1 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Hans Grohe Metris 31102XX1?

Utilizza il modulo sottostante

Se non hai risolto il problema con Hans Grohe Metris 31102XX1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Hans Grohe Metris 31102XX1 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)