-
NuTone CT650 - page 1
MODEL: CT650 HOUSEHOLD TYPE DELUXE MOT OR-DRIVEN POWER BRUSH HOMEOWNERS OPERA TING INSTRUCTIONS SA VE THESE INSTRUCTIONS Garantie limitée d’un an GARANTIE DU PROPRIÉTAIRE: NuTone garantie à l'acheteur original de ses produits que ces derniers seront exempts de tout défaut de matériaux et de fabrication pour une période d’un (1) an à ...
-
NuTone CT650 - page 2
IMPORT ANT SAFEGUARDS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THE V ACUUM CLEANER W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces. • Do not leave Power Brush unattended when plugged in. Dis ...
-
NuTone CT650 - page 3
GENERAL INFORMA TION SERVICE INFORMA TION The performance of your new Power Brush greatly depends upon home mainte- nance. The instructions given in the booklet will guide you in performing simple home maintenance. T o obtain the most satisfying years of service, read through these instructions and keep them handy for future reference. If you requi ...
-
NuTone CT650 - page 4
Item Part No. Headlight Bulb 9123A Belt 0518B P ARTS AND FEA TURES It is important to know your vacuum cleaner ’s parts and features to assure its proper and safe use. Review these before using your cleaner . Cord and Cord Holder Upper Wand Cord Holder Power Cord Belt Headlight and Lens Pile Height Indicator Edge Cleaner (Not Shown) Dirt Sensor P ...
-
NuTone CT650 - page 5
HOW T O ASSEMBLE THE POWER BRUSH 1. Snap together the two interlocking wands. 2. Push assembled wands into Power Brush handle socket so that buttons snap into place. 3. Press cord into channels. 4. Connect power brush cord to hose connection, aligning angled corners of plug to receptacle on hose. 5. Snap end of hose into assembled wands, making sur ...
-
NuTone CT650 - page 6
HOW T O USE THE POWER BRUSH NOTE: The Power Brush is not recommended for use on bare floors. W and release on Power Brush allows you to quickly disconnect wands and switch to Combination Floor/Rug T ool for use on bare floors. Always pick up hard or sharp objects by hand before using your Power Brush. Items such as pins, hairpins, tacks, crayons an ...
-
NuTone CT650 - page 7
V ACUUMING TIPS Suggested sweeping pattern. For best cleaning action, the Power Brush should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direc- tion of the Power Brush should be changed to point into the next section to be cleaned. This pattern should be continued across the rug with slow , gliding ...
-
NuTone CT650 - page 8
SOME MODELS The dirt sensor light system is mounted on the Power Brush nozzle near the reset but- ton. It consists of a series of three red lights and one green light. The lights give you an indica- tion of the amount of dirt particles that are passing thru the sensor on its way to the dust bag. INITIAL ST ART UP When the Power Brush is first start ...
-
NuTone CT650 - page 9
A TT ACHMENT USE CHART EDGE CLEANER Active brush edge cleaners are on both sides of the Power Brush. Guide either side of the Power Brush along the baseboards or next to furniture to help remove dirt trapped at carpet edges. OVERLOAD PROTECTOR The Power Brush has built-in protection against motor and belt damage should the agitator jam. If the agit ...
-
NuTone CT650 - page 10
CHANGING THE BEL T AND CLEANING THE AGIT A T OR W ARNING! Electrical Shock or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so can result in electrical shock or personal injury from cleaner suddenly starting. Disconnect cleaner from electrical outlet. Check and remove hair , string and lint ...
-
NuTone CT650 - page 11
5. Line up front of cover and base. Rest cover on front edge of base as shown. 7. T ilt back. Press cover firmly until side and rear tabs snap into place. T urn the power brush upside down and replace two (2) cover screws. CHANGING THE LIGHT BULB 1. Remove cover as shown in BEL T CHANGING AND AGIT A T OR CLEANING section. 2. Push in and turn bulb c ...
-
NuTone CT650 - page 12
AGIT A T OR ASSEMBL Y SER VICING THE AGIT A T OR ! W ARNING Electrical Shock or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. TO CHECK AGIT A TOR ASSEMBL Y : When brush- es are worn to the level of the ba ...
-
NuTone CT650 - page 13
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Cleaner won’t start. Poor job of dirt pick-up. Cleaner starts but cuts off. Power Brush will not run when attached. Constant green light on in dirt sensor . Any , some, or all red light in dirt sensor burn and never turn green. No green or red dirt sensor lights. Cleaner picks up move- able rugs or Power B ...
-
NuTone CT650 - page 14
NOTES RENSEIGNEMENTS GÉNÉRAUX RENSEIGNEMENTS RELA TIFS AU SERVICE Le rendement de votre nouveau balai motorisé dépend grandement de son entretien à la maison. Les directives du présent guide vous permettront d’ef- fectuer des opérations simples d’entretien à la maison. Pour obtenir un rende- ment satisfaisant pendant de nombreuses anné ...
-
NuTone CT650 - page 15
NOTES IMPORT ANTES PRÉCAUTIONS Il faut toujours prende des précautions de base lors de l’utilisation d’un appareil électrique, notamment ce qui suit: LISEZ TOUTES LES DIRECTIVES A V ANT DE VOUS SERVIR DE L ’ASPIRA TEUR MISE EN GARDE Pour réduire les risques d’incendie, de choc électrique ou de blessure: • N’utilisez pas l’apparei ...
-
NuTone CT650 - page 16
One Y ear Limited W arranty WARRANTY OWNER: NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one (1) year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES ...
Hai una domanda su NuTone CT650?
Utilizza il modulo sottostante
Se non hai risolto il problema con NuTone CT650 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con NuTone CT650 è probabile che voglia condividere il modo di risolverlo.