Italiano dropdown-ico

Manuale per l’uso Maytag MLG32PD3

39 pagine 1.77 mb
Scarica

Vai alla pagina of 39

Summary
  • Maytag MLG32PD3 - page 1

    Part No. 113158 MLG32PD3 30 lb. Stacked Model Installation Manual 101000GS/rar W ARNING: For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death. Do not store or use gasoline or other flammable vapor and liquids in the vicinity of this or any o ...

  • Maytag MLG32PD3 - page 2

    Retain This Manual In A Safe Place For Futur e Refer ence This product embodies advanced concepts in engineering, design, and safety . If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSER VE ALL SAFETY PRECAUTIONS displayed ...

  • Maytag MLG32PD3 - page 3

    IMPOR T ANT YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC SUPPL Y and THE GAS SUPPL Y BEFORE ANY COVERS or GUARDS ARE REMOVED FROM THE MACHINE TO ALLOW ACCESS FOR CLEANING , ADJUSTING , INST ALLA TION, or TESTING OF ANY EQUIPMENT per OSHA (Occupational Safety and Health Administration) ST ANDARDS. CHILDREN SHOULD NOT BE ALLOWED TO PLA Y ON OR NEAR T ...

  • Maytag MLG32PD3 - page 4

    W ARNING The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJUR Y or FIRE COULD RESUL T . IMPOR T ANT PLEASE OBSER VE ALL SAFETY PRECAUTIONS displayed on the equipment and/or specified in the installation manual included with the dryer . The wiring diagram for the dryer is located in the ...

  • Maytag MLG32PD3 - page 5

    Table of Contents SECTION I IMPOR T ANT INFORMA TION ............................................................................... 3 A. Recieving and Handling ............................................................................................................... 3 B . Safety Precautions .................................................... ...

  • Maytag MLG32PD3 - page 6

    SECTION VII ROUTINE MAINTENANCE .................................................................................. 2 8 A. Cleaning ................................................................................................................................... 28 B. Adjustments ..................................................................... ...

  • Maytag MLG32PD3 - page 7

    3 SECTION I IMPOR T ANT INFORMA TION A. RECEIVING and HANDLING The dryer is shipped in a protective stretch wrap cover with protective cardboard corners and top cover (or optional box) as a means of preventing damage in transit. Upon delivery , the dryer and packaging, and wooden skid should be visually inspected for shipping damage. If any damage ...

  • Maytag MLG32PD3 - page 8

    4 B. SAFETY PRECAUTIONS W ARNING: For your safety , the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury , or loss of life. W ARNING: The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJUR Y or FIRE COULD ...

  • Maytag MLG32PD3 - page 9

    5 W ARNING: DO NOT use heat for drying articles that contain plastic, foam, sponge rubber , or similarly textured rubberlike materials. Drying in a heated basket (tumbler) may damage plastics or rubber and also may be a fire hazard. 7. A program should be established for the inspection and cleaning of lint in the heating unit area, exhaust duct wor ...

  • Maytag MLG32PD3 - page 10

    6 SECTION II SPECIFICA TIONS NOTE: Manufacturer reserves the right to make changes in specifications at any time without notice or obligation. ...

  • Maytag MLG32PD3 - page 11

    7 ML G 32PD 3 M AXIMUM C AP AC I TY (D RY W EI GH T ) 30 l bs .* 13.6 kg B AS K ET (T UM BLER ) D IAME T ER 27- 1/4" 6 9.21 cm B AS K ET (T UM BLER ) D EP TH 30" 76.2 cm B AS K ET (T UM BLER ) V OL U ME (P ER B AS K ET [T UMB LER ] ) 10.1 c u . f t .* 28.3 cu. m . B AS K ET (T UM BLER ) M OT OR (P ER B AS K ET [T UMB LER ]) 1/2 HP 0.37 2 ...

  • Maytag MLG32PD3 - page 12

    8 SECTION III INST ALLA TION PROCEDURES Installation should be performed by competent technicians in accordance with local and state codes. In the absence of these codes, the installation must conform to applicable American National Standards: ANSI Z223.1- LA TEST EDITION (National Fuel Gas Code) or ANSI/NFP A NO. 70-LA TEST EDITION (National Elect ...

  • Maytag MLG32PD3 - page 13

    9 1. The dryer must be installed on a sound level floor capable of supporting its weight. Carpeting must be removed from the floor area that the dryer is to rest on. IMPOR T ANT : “The dryer must be installed on noncombustible floors only .” 2. The dryer must not be installed or stored in an area where it will be exposed to water or weather . 3 ...

  • Maytag MLG32PD3 - page 14

    10 C. DR YER ENCLOSURE REQUIREMENTS Bulkheads and partitions should be made of noncombustible materials and must be located a minimum of 12-inches (30.48 cm) - (18-inches [45.72 cm] or more is recommended for ease of installation, maintenance, and service) - above the dryer ’ s outer top, except along the front of the dryer which may be closed in ...

  • Maytag MLG32PD3 - page 15

    11 IMPOR T ANT : Make-up air openings should not be located near duct work exhaust outlets. If make-up air openings are too close to the exhaust outlet, lint and fumes may be drawn back into the dryer area through these openings. NOTE: Component failure due to dry cleaning fumes will VOID THE W ARRANTY . ...

  • Maytag MLG32PD3 - page 16

    12 E. EXHAUST REQUIREMENTS Exhaust duct work should be designed and installed by a qualified professional. Improperly sized duct work will create excessive back pressure which results in slow drying, increased use of energy , overheating of the dryer , and shutdown of the burner by the airflow (sail) switches, burner hi-limits, or basket (tumbler) ...

  • Maytag MLG32PD3 - page 17

    13 NOTE: When the exhaust duct work passes through a wall, ceiling, or roof made of combustible materials, the opening must be 2-inches (5.08 cm) larger than the duct ( ALL the way around). The duct must be centered within this opening. T o protect the outside end of the horizontal duct work from the weather , a 90º elbow bent downward should be i ...

  • Maytag MLG32PD3 - page 18

    14 2. Multiple Dryer (Common) V enting If it is not feasible to provide separate exhaust ducts for each dryer , ducts from individual dryers may be channeled into a common main duct. The individual ducts should enter the bottom or side of the main duct at an angle not more than 45º in the direction of the airflow . IMPOR T ANT : No more than eight ...

  • Maytag MLG32PD3 - page 19

    15 IMPOR T ANT : DO NOT use screens or caps on the outside opening of the exhaust duct work. NOTE: I n situations where a 10-inch (25.4 cm) exhaust duct is required or acceptable, to ease installation an 8-inch (20.32 cm) dryer exhaust outlet size to 10-inch (25.4 cm) exhaust duct increaser (transition piece) is available from the factory by orderi ...

  • Maytag MLG32PD3 - page 20

    16 F . ELECTRICAL INFORMA TION 1. Electrical Requirements It is your responsibility to have ALL electrical connections made by a properly licensed and competent electrician to assure that the electrical installation is adequate and conforms with local and state regulations or codes. In the absence of such codes, ALL electrical connections, material ...

  • Maytag MLG32PD3 - page 21

    17 3. Electrical Connections A wire diagram is located on the inside of the control (service) box for connection data. a . Single-Phase (1ø) Hookup The electrical connections on ALL single-phase (1ø) dryers are made into the junction box located at the upper rear of the dryer . A separate circuit servicing each dryer basket (tumbler) must be prov ...

  • Maytag MLG32PD3 - page 22

    18 * A WG Stranded T ype W ire for individual lengths less than 100 feet (30.48 meters). NOTE: Contact factory for electrical information not listed. NOTE: Manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Providing local codes permit, power to the dryer can be made by use of a flexible U.L. ...

  • Maytag MLG32PD3 - page 23

    19 G . GAS INFORMA TION It is your responsibility to have ALL plumbing connections made by a qualified professional to assure that the gas plumbing installation is adequate and conforms with local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable require ...

  • Maytag MLG32PD3 - page 24

    20 2. T echnical Gas Data a . Gas Specifications * Measured at gas valve pressure tap when the gas valve is on. ** For elevations up to 2,000 feet (610 meters). W .C. = W ater Column in inches. N.P .T . = National Pipe Thread. b. Natural Gas Regulation is controlled by each gas valve’ s internal regulator . Incoming supply pressure must be consis ...

  • Maytag MLG32PD3 - page 25

    21 The dryer is provided with a 3/4” N.P .T . inlet pipe connection at the upper right hand corner (when viewed from the rear) of each dryer . It is recommended that a gas shutof f valve be provided to the gas supply line of each dryer for ease of servicing. The size of the main gas supply line (header) will vary depending on the distance this li ...

  • Maytag MLG32PD3 - page 26

    22 W ARNING: T est ALL connections for leaks by brushing on a soapy water solution (liquid detergent works well). W ARNING: NEVER TEST FOR LEAKS WITH A FLAME!!! It is important that gas pressure regulators meet applicable pressure requirements and that gas meters be rated for the total amount of appliance BTUs being supplied. H. PREP ARA TION FOR O ...

  • Maytag MLG32PD3 - page 27

    23 NOTE: The dryer can be stopped at any time by opening the main door . T o restart dryer , shut the main door and press desired fabric setting. 4) Open main door to stop the dryer , and change to a different fabric setting. Repeat this procedure, until ALL fabric selections have been tested. This will also confirm that setting key circuits and do ...

  • Maytag MLG32PD3 - page 28

    24 3. Make a complete operational check of ALL the operating controls to ensure that the timing is correct and that the temperatures are set properly . 4. Make a complete operational check of ALL safety-related circuits (i.e., door switches, hi-limit thermostats, sail switches, basket (tumbler) safety thermostats, etc.). NOTE: The sail switch can b ...

  • Maytag MLG32PD3 - page 29

    25 SECTION IV OPERA TING INSTRUCTIONS A. ST AR TING THE DR YER The dryer is available for use when the appropriate side of the microprocessor display reads “0 minutes” and the amount needed to start the dryer (i.e., “25”). Once the load has been put into the dryer and the main door is closed, start the dryer as follows: 1. Insert the proper ...

  • Maytag MLG32PD3 - page 30

    26 SECTION V SER VICE/P AR TS INFORMA TION A. SER VICE 1. Only properly trained or competent technicians should service the dryer . If service is required, contact the distributor from whom the equipment was purchased. If the distributor cannot be contacted or is unknown, contact the Maytag Company for a distributor in your area. NOTE: When contact ...

  • Maytag MLG32PD3 - page 31

    27 SECTION VI W ARRANTY INFORMA TION A. RETURNING W ARRANTY CARD(S) 1. Before any dryer leaves the manufacturer , a warranty card is affixed to the glass of the main door . These warranty cards are intended to serve the customer as a record installation date of that specific dryer so as to extend the customer ’ s warranty period. IMPOR T ANT : A ...

  • Maytag MLG32PD3 - page 32

    28 SECTION VII ROUTINE MAINTENANCE A. CLEANING A program or schedule should be established for periodic inspection, cleaning, and removal of lint from various areas of the dryer , as well as throughout the duct work system. The frequency of cleaning can best be determined from experience at each location. Maximum operating efficiency is dependent u ...

  • Maytag MLG32PD3 - page 33

    29 90 DA Y S Remove lint from the motor air vents and surrounding area. IMPOR T ANT : Lint accumulation will restrict the airflow over the motors, causing overheating and irreparable motor damage. Motor failure due to lint accumulation will VOID THE W ARRANTY . Remove lint accumulation from around the openings in the dryer ’ s back panels. Remove ...

  • Maytag MLG32PD3 - page 34

    30 B. ADJUSTMENTS 7 DA YS AFTER INST ALLA TION and EVERY 6 MONTHS THEREAFTER Inspect bolts, nuts, screws (bearing setscrews), nonpermanent gas connections (unions, shutoff valves, orifices, etc.), electrical terminations, and grounding connections. Motor and drive belts should be examined. A cracked or seriously frayed belt should be replaced. T ig ...

  • Maytag MLG32PD3 - page 35

    31 SECTION VIII DR YER DA T A LABEL INFORMA TION A. DA T A LABEL LOCA TION The dryer data label is located in the upper basket (tumbler) gas train area (left middle section of dryer) as shown in the photo below . ...

  • Maytag MLG32PD3 - page 36

    32 B. DA T A LABEL The data label includes ALL the pertinent information about the dryer necessary to ensure the dryer is installed with the proper services (i.e. type of gas and electric voltage, etc.). It also includes ALL the necessary data for technical support and parts information. When contacting the Maytag Company , please have the model an ...

  • Maytag MLG32PD3 - page 37

    33 THE DA T A LABEL 1. MODEL NUMBER The model number is a number , which describes the size of the dryer and the type of heat (i.e. gas). 2. SERIAL NUMBER The serial number allows the Maytag Company to gather information on your particular dryer . 3. MANUF ACTURING CODE NUMBER The manufacturing code number is a number issued by the manufacturer whi ...

  • Maytag MLG32PD3 - page 38

    34 SECTION IX PROCEDURE FOR FUNCTIONAL CHECK OF REPLACEMENT COMPONENTS Theory Of Operation: Start the drying cycle. When the gas burner ignites within the chosen trial for ignition time (6-seconds), the flame sensor detects gas burner flame and signals the DSI module to keep the gas valve open...as long as there is a call for heat. The DSI module w ...

  • Maytag MLG32PD3 - page 39

    35 Part No. 113158 1- 11/03/00-50 ...

Fabbricante Maytag Categoria Clothes Dryer

I documenti che otteniamo dal fabbricante del dispositivoMaytag MLG32PD3 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Maytag
- manuali per l’uso MLG32PD3
- schede prodotto Maytag
- opuscoli
- o etichette energetiche Maytag MLG32PD3
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Maytag MLG32PD3.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Maytag MLG32PD3, manuali di manutenzione, brevi manuali o manuali utente Maytag MLG32PD3. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Maytag MLG32PD3.

Manuali per l’uso simili

Manuale completo del dispositivo Maytag MLG32PD3, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Maytag MLG32PD3 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Maytag MLG32PD3.

Il manuale per l’uso completo Maytag, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Maytag MLG32PD3 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Maytag MLG32PD3, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Maytag MLG32PD3 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Maytag MLG32PD3 - che ci dovrebbe aiutare nei primi passi durante l'uso Maytag MLG32PD3
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Maytag MLG32PD3
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Maytag MLG32PD3 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Maytag MLG32PD3?

Utilizza il modulo sottostante

Se non hai risolto il problema con Maytag MLG32PD3 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Maytag MLG32PD3 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)