-
Invacare 1073955 - page 1
Owner’s Operator and Maintenance Manual DEALER: This manual MUST be given to the user of the product. USER: B E F OR E u s i n g t h i s product, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.invacare.com Orbit ™ ...
-
Invacare 1073955 - page 2
Orbit ™ 2 Part No. 107395 5 WARNING A QUALIFIED TECHNICIAN MUST PERFORM THE INITIAL SET UP OF THIS WHEELCHAIR. ALSO, A QUALIFIED TECHNICIAN MUST PERFORM ALL PROCEDURES SPECIFICALLY INDICATED IN THE MANUAL. WHEELCHAIR USERS: DO NOT SERVICE OR OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND UNDERSTANDING (1) THE OWNER’S OPERATOR AND MAINTENA ...
-
Invacare 1073955 - page 3
TABLE OF CONTENTS Part No. 1073955 3 Orbit™ TABLE OF CONTENTS REGISTER YOUR PR ODUCT ............................................................... 6 SPECIAL NOTES ................................................................................ 9 LABEL LOCATION .......................................................................... 10 Standar ...
-
Invacare 1073955 - page 4
TABLE OF CONTENTS Orbit™ 4 Part No. 107 3955 TABLE OF CONTENTS SECTION 5—FRONT RIGGINGS ........................................................ 30 Installing/Removing Front Riggings ............ ............................................. .................................... ..........30 Adjusting Footplate Heig ht .......................... ...
-
Invacare 1073955 - page 5
TABLE OF CONTENTS Part No. 1073955 5 Orbit™ TABLE OF CONTENTS SECTION 10—ANTI-TIPPERS /WHEEL LOCKS ..................................... 65 Foot Activated Wheel Lock Procedures . .......................................................................................... .65 Hand Activated Wheel Lock Procedures .... .............................. ...
-
Invacare 1073955 - page 6
REGISTER YOUR PRODUCT Orbit™ 6 Part No. 107 3955 REGISTER YOUR PRODUCT The benefits of registering: 1. Safeguard your investment. 2. Ensure long term maintenance an d servicing of your purchase. 3. Receive updates with prod uct information, maintenanc e tips, and industry news. 4. Invacare can contact you or your provider, if servicing is needed ...
-
Invacare 1073955 - page 7
Part No. 1073955 7 Orbit ™ Name _______________________________________________________________ Address _____________________________________________________________ City ___________________ State/Province __________ Zip/Postal Code ________ Email ___________________________________ Phone No. _________________ Invacare Model No. _________________ ...
-
Invacare 1073955 - page 8
Orbit ™ 8 Part No. 107395 5 Fold here Fold here Cut Along Line Invacare Product Registration Form Please Seal with Tape Before Mailing ...
-
Invacare 1073955 - page 9
SPECIAL NOTES Part No. 1073955 9 Orbit ™ SPECIAL NOTES Signal words are use d in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. Refer to the following table for definit ...
-
Invacare 1073955 - page 10
LABEL LOCATION Orbit ™ 10 Part No. 107395 5 LABEL LOCATION Standard Labels WARNING DO NOT OPERATE WITHOUT THE ANTI-TIP TUBES INSTALLED. REV. 5/98 P/N 60106X144 Ref er to Owner's Manual f or proper anti-tipper setting. 1085379 W ARNING NOTE: Seat removed for clarity . WEIGHT CAPACITY 150 LBS. (68 kgs.) REFER TO OWNER’S M ANU ...
-
Invacare 1073955 - page 11
LABEL LOCATION Part No. 1073955 11 Orbit ™ Wheelchairs with TRRO P/N 1120033 REV B - 08/05 Refer to attached TRANSPORT READ Y OPTION Instruction Card and wheelchair Owner's Man ual before use. NOTE: Seat removed for clarity . ...
-
Invacare 1073955 - page 12
TYPICAL PRODUCT PARAMETERS Orbit ™ 12 Part No. 107395 5 TYPICAL PRODUCT PARAMETERS *NOTE: Invacar e rec o mm e n ds that rea r seat ‐ to ‐ floor height be at least 3/8 inch shorter than fr ont seat ‐ to ‐ floor height. Otherwis e a forward seat dump ca ...
-
Invacare 1073955 - page 13
SECTION 1—GENERAL GUIDELINES Part No. 1073955 13 Orbit ™ SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - GENERAL GUIDELIN ES contai ns important inform ation for the safe operation and use of this product. DO NOT use this prod uct or any available optional equipment without first comple tely reading and understanding these instructions a ...
-
Invacare 1073955 - page 14
SECTION 1—GENERAL GUIDELINES Orbit ™ 14 Part No. 107395 5 Anti-Tippers Anti ‐ tippers MUST be attached at all times. Inasm uch as the anti ‐ tippers are an option on this wheelchair (y ou may order with or without the anti ‐ tippers), Inv a ...
-
Invacare 1073955 - page 15
SECTION 1—GENERAL GUIDELINES Part No. 1073955 15 Orbit ™ DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes. DO NOT tip the wheelchair without assistance. DO NOT use an escalator to move a whee ...
-
Invacare 1073955 - page 16
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Orbit ™ 16 Part No. 107395 5 SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Safety/Handling of Wheelchairs Safety and handling of the wheelchair require the close attention of the wheelchair user as wel l as the assistant. Th is ...
-
Invacare 1073955 - page 17
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Part No. 1073955 17 Orbit ™ Coping With Everyday Obstacles Coping with the irritation of ev eryday obstacles can be alleviated somewhat by learning how to manage yo u r wheelchair . Keep in mind yo u r ce nter of ...
-
Invacare 1073955 - page 18
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Orbit ™ 18 Part No. 107395 5 Reaching, Leanin g an d Bending Forward WARNING DO NOT attempt to reach objects if you have to move fo rward in the seat or pick them up from the floor by reaching down between your knees. NOTE: For this proced ure, ref er to FIGURE 2.1. Po s i t i ...
-
Invacare 1073955 - page 19
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Part No. 1073955 19 Orbit ™ Method 1 - Wheelchair With Step Tubes NOTE: For this proced ure, ref er to FIGURE 2.3. Place foot on the step tube and begin to tilt the wheelchair toward you . Apply a continuous downw ...
-
Invacare 1073955 - page 20
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Orbit ™ 20 Part No. 107395 5 WARNING When lowering the front casters of th e wheelchair, DO NO T let the wheelchair drop the last few inches to the ground. This coul d result in injury to the occupant and/or damage to the wheelchair. Roll the wheelchair backward and slowly low ...
-
Invacare 1073955 - page 21
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS Part No. 1073955 21 Orbit ™ 3. The second assistant, with a firm hold on a non ‐ detachable part of the framework, lifts the wheelchair up and over the stair and steadies the wheelchair as the ? ...
-
Invacare 1073955 - page 22
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING Orbit ™ 22 Part No. 107395 5 SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING NOTE: Every six months or as necessary , take your wheelchair to a qualified technician for a thorough ins pection and servicing. Regular clean ...
-
Invacare 1073955 - page 23
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING Part No. 1073955 23 Orbit ™ ❑ Inspect handrims for signs of rough edges or peeling. ❑ Inspect axle assembly for proper tension by spinning caster . Caster should come to a gradual stop. ❑ Adjust front ...
-
Invacare 1073955 - page 24
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING Orbit ™ 24 Part No. 107395 5 ❑ Check that the wheel lock pivot point s are free of wea r and looseness. ❑ Inspect seat and back for loose or broken hardw are. ❑ Inspect seat positioning strap for ...
-
Invacare 1073955 - page 25
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING Part No. 1073955 25 Orbit ™ Troubleshooting Maintenance Maintenance Safety Precautions WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely. CAUTION DO NOT overtighten hardware attaching to th e frame. This could cause damage to th ...
-
Invacare 1073955 - page 26
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING Orbit ™ 26 Part No. 107395 5 WARNING DO NOT use the wheelchair unless it has th e proper tire pressur e (P.S.I.). DO NOT overinflate the tires. Failu re to follow these suggestio ns may cause the tire to explode and cause bodily harm. 5. If tires are pneumatic, recommended tire ...
-
Invacare 1073955 - page 27
SECTION 4—ASSEMBLY Part No. 1073955 27 Orbit ™ SECTION 4—ASSEMBLY WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. Assembling/Disassembling the Removable Orbit Wheelchair NOTE: For this proced ure, ref er to ...
-
Invacare 1073955 - page 28
SECTION 4—ASSEMBLY Orbit ™ 28 Part No. 107395 5 WARNING The locking pins MUST be protruding past the top of the seat plate assembly for a positive lock. Keep locking pins clean. 10. Push in on the tip of the quick ‐ release pin and reinstall in the seat/base frame plate assem ...
-
Invacare 1073955 - page 29
SECTION 4—ASSEMBLY Part No. 1073955 29 Orbit ™ FIGURE 4.1 Assembling/Disassembling the Removable Orbit Wheelchair Locking Channel Seat Frame Base Frame Base Frame Plate Locking Button Locking Buttons Engage Here Seat Fram e Plate DETAIL “A” - SECTIONAL OF SEAT FRAME AND BASE FRAM E ASSEMBLED (WITHOUT SEATING SYSTEM) Seat Frame Plate Locking ...
-
Invacare 1073955 - page 30
SECTION 5—FRONT RIGGINGS Orbit ™ 30 Part No. 107395 5 SECTION 5—FRONT RIGGINGS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. Installing/Removing Front Riggings NOTE: For this proced ure, ref er to FIGU ...
-
Invacare 1073955 - page 31
SECTION 5—FRONT RIGGINGS Part No. 1073955 31 Orbit ™ Adjusting Footplate Height NOTE: Release the footrest locking mec hanism and lift the mounting pin out of the mounting tub e. Lay the assembly on a flat surface to simplify this procedur e. ...
-
Invacare 1073955 - page 32
SECTION 5—FRONT RIGGINGS Orbit ™ 32 Part No. 107395 5 WARNING DO NOT overtighten. Footrest must be able to rotate upwar d from the horizon- tal to vertical position. 4. Reinstall the mounting screw through the mounting holes of the footplate and footrest support. 5. Secure the foot ...
-
Invacare 1073955 - page 33
SECTION 5—FRONT RIGGINGS Part No. 1073955 33 Orbit ™ Installing Elevating Legrest NOTE: For this proced ure, ref er to FIGURE 5.5. 1. Insert the pivot tu be into the legrest support and secure it with the bolt and nut. 2. Place legrest on the out ...
-
Invacare 1073955 - page 34
SECTION 5—FRONT RIGGINGS Orbit ™ 34 Part No. 107395 5 Installing/Adjusting the Adjustable Angle Flip-up Footplates WARNING When determining the angle of the footplates, make sure the rear of the footplates do not in terfere with the movement of the front casters. NOTE: For this proced ure, ref er to FIGURE 5.7. Insta ...
-
Invacare 1073955 - page 35
SECTION 5—FRONT RIGGINGS Part No. 1073955 35 Orbit ™ FIGURE 5.8 Adjusting Depth on Adjustable Angle Fl ip-Up - Adjusting Angle on Adjustable Angle Flip-up Footplate Adjusting Perpendicular and/or Inversion/Eversion Adjustable Angle Flip-up Footplate NOTE: For this proced ure, ref er to FIGURE 5.9. NOTE: It is ...
-
Invacare 1073955 - page 36
SECTION 5—FRONT RIGGINGS Orbit ™ 36 Part No. 107395 5 4. Secure the bilateral contracture platform to the seat frame in the mounting position shown in FIGURE 5.10 with the mounting screws and wa s h e r s provided. Securely tighten. 5. Adjust ...
-
Invacare 1073955 - page 37
SECTION 5—FRONT RIGGINGS Part No. 1073955 37 Orbit ™ FIGURE 5.11 Adjusting Height of Bilate ral Contracture Platform Adjusting Bilateral Contracture Platform Angle 1. Remove the two mounting screws and locknuts that secure the upper support of the bilateral contracture platform ...
-
Invacare 1073955 - page 38
SECTION 5—FRONT RIGGINGS Orbit ™ 38 Part No. 107395 5 FIGURE 5.12 Replacing Sector Block Installing/Removing/Adjusti ng the Telescoping Front Frame Tubes NOTE: For this proced ure, ref er to FIGURE 5.13 on page 39. Installing/Removing Telesc oping Front Frame Tubes 1. If necessary , remove the ...
-
Invacare 1073955 - page 39
SECTION 5—FRONT RIGGINGS Part No. 1073955 39 Orbit ™ FIGURE 5.13 Installing/Removing/Adjusting the Telescoping Front Frame Tubes Optional Footrest Accessories Replacing Heel Loop Composite Footplates NOTE: For this proced ure, ref er to FIGURE 5.14. 1. Remove the mounting screw and coved was h er ...
-
Invacare 1073955 - page 40
SECTION 5—FRONT RIGGINGS Orbit ™ 40 Part No. 107395 5 Adjustable Footplate NOTE: For this proced ure, ref er to FIGURE 5.15. 1. Remove the four mounting screws and was h e r s that secure the existing heel loop to the footplate. 2. P osition the mounting ...
-
Invacare 1073955 - page 41
SECTION 6—ARMS Part No. 1073955 41 Orbit ™ SECTION 6—ARMS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. Installing the T-Arm Sockets NOTE: For this proced ure, ref er to FIGURE 6.1. 1. Remove the ? ...
-
Invacare 1073955 - page 42
SECTION 6—ARMS Orbit ™ 42 Part No. 107395 5 Installing/Removing the T-arms NOTE: For this proced ure, ref er to FIGURE 6.2. Installing T-Arms 1. P osition the T ‐ arm ov er the T ‐ arm socket on the wheelchair frame. NOTE: Make sure the locking lever is ...
-
Invacare 1073955 - page 43
SECTION 6—ARMS Part No. 1073955 43 Orbit ™ Adjusting the T-Arms Adjusting T-Arm Height NOTE: For this proced ure, ref er to FIGURE 6.3. 1. Unlock the T ‐ arm by flipping the T ‐ arm release lev er tow ards the inside of the wheelchair . NOTE: If necessar ...
-
Invacare 1073955 - page 44
SECTION 6—ARMS Orbit ™ 44 Part No. 107395 5 2. Rotate the arm pad 180 o and reposition the arm pad on the arm tube. 3. Re ‐ secure the arm pad to the arm tube with the tw o mounting screws. Securely tighten. 4. Repeat STEPS ...
-
Invacare 1073955 - page 45
SECTION 6—ARMS Part No. 1073955 45 Orbit ™ FIGURE 6.5 Adjusting the T-Arms - Adjusting T-Arm Depth Adjusting T-Arm Sockets NOTE: For this proced ure, ref er to FIGURE 6.6. 1. Remove the rear wheels from the wheelchair . Refer to Remo ving/Installing Rear Wheels on page ...
-
Invacare 1073955 - page 46
SECTION 6—ARMS Orbit ™ 46 Part No. 107395 5 FIGURE 6.6 Adjusting the T-Arms - Adjusting T-Arm Sockets Adjusting the Transfer Assists and/or Side Guards NOTE: For this proced ure, ref er to FIGURE 6.7 on page 47. 1. Remove the T ‐ arm from the wheelchair . Re fer to Installing ...
-
Invacare 1073955 - page 47
SECTION 6—ARMS Part No. 1073955 47 Orbit ™ 4. Re ‐ secure the side guard to the bottom clamp with the two bottom mou nting screws. Securely tighten. 5. Install the T ‐ arm onto the wheelchair . Refer to Installing/Removing the T ‐ arms ? ...
-
Invacare 1073955 - page 48
SECTION 6—ARMS Orbit ™ 48 Part No. 107395 5 WARNING DO NOT over tighten the lo cknut that secures the locking lever to the bottom bracket. Over tightening this locknut w ill prevent the locking lever from operating properly, possibly causing injury. 7. Install the phillips bolt and tighten securely with the ? ...
-
Invacare 1073955 - page 49
SECTION 6—ARMS Part No. 1073955 49 Orbit ™ Installing/Removing/Adjusting Catilever Arms NOTE: To rem ov e, reverse this pr ocedure. NOTE: When remo v i n g the locknuts and washers fr om the cantilever arm assembly , leave the top mounting screw , coved ...
-
Invacare 1073955 - page 50
SECTION 6—ARMS Orbit ™ 50 Part No. 107395 5 Replacing/Repositioning the Locking Mechanism in the Cantilever Arm NOTE: For this proced ure, ref er to FIGURE 6.10 on page 50. CAUTION The locking mechanism is sp ring loaded. Place your fr ee hand over the locking mechanism to prevent parts f rom springing out of ...
-
Invacare 1073955 - page 51
SECTION 6—ARMS Part No. 1073955 51 Orbit ™ Replacing and Adjusting Arm Pad Depth for Cantilever Arms NOTE: For this proced ure, ref er to FIGURE 6.1 1. Adjustment 1. Remove the mounting screw from the rear of the armrest pad and self ‐ taping screw if full ...
-
Invacare 1073955 - page 52
SECTION 7—SEAT AND BACK Orbit ™ 52 Part No. 107395 5 SECTION 7—SEAT AND BACK WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. NOTE: The procedures in this section of the ma nual apply to ? ...
-
Invacare 1073955 - page 53
SECTION 7—SEAT AND BACK Part No. 1073955 53 Orbit ™ Installing Fixed Height Stroller Handles NOTE: For this proced ure, ref er to FIGURE 7.2. 1. Remove the back cane grip and plug button from the back cane. 2. Slide the stroller handle into the back ...
-
Invacare 1073955 - page 54
SECTION 7—SEAT AND BACK Orbit ™ 54 Part No. 107395 5 Removing Adjustable Angle Stroller Handles 1. Remove the tw o mounting screws that secure the adjustable height stroller handle to the back canes. 2. Remove the adjustable angle stroller handle from the ? ...
-
Invacare 1073955 - page 55
SECTION 7—SEAT AND BACK Part No. 1073955 55 Orbit ™ FIGURE 7.4 Adjusting Adjustable Angle Stroller Handles Removing/Installing the Spreader Bar NOTE: For this proced ure, ref er to FIGURE 7.5 on page 56. NOTE: For remo v i ng and installing the spr eader bar on the rec ...
-
Invacare 1073955 - page 56
SECTION 7—SEAT AND BACK Orbit ™ 56 Part No. 107395 5 CAUTION When reattaching back assembly, DO NOT OVERTIGH TEN! Back will not fold down properly. Tighte n hardware unt il snug. 10. Reattach back assembly to the back angle bracket with the existing mounting screws, spacers, w ashers, ...
-
Invacare 1073955 - page 57
SECTION 7—SEAT AND BACK Part No. 1073955 57 Orbit ™ Installing/Removing a Seating System NOTE: If a seating system is being used on the wheelchair , ref er to your particular sea ting system manufacturer ʹ s Owner ʹ s Manual for installation and remova ...
-
Invacare 1073955 - page 58
SECTION 8—FRONT CASTERS Orbit ™ 58 Part No. 107395 5 SECTION 8—FRONT CASTERS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. CAUTION DO NOT overtighten hardwar e attaching to the frame. Damage to components may occur. Replacing ...
-
Invacare 1073955 - page 59
SECTION 8—FRONT CASTERS Part No. 1073955 59 Orbit ™ Replacing Front Fork NOTE: For this proced ure, ref er to FIGURE 8.2. 1. Remove the front caster assemblies from the wheelchair . Refer to Replacing/Installing Front Caster Assemblies on page 58. 2. Remove ...
-
Invacare 1073955 - page 60
SECTION 8—FRONT CASTERS Orbit ™ 60 Part No. 107395 5 Adjusting Caster Headtubes NOTE: For this proced ure, ref er to FIGURE 8.3. NOTE: Caster headtubes that ar e perpendicular to the floor will ro ll better , track straighter and minimize any ʺ 3 ‐ whe ...
-
Invacare 1073955 - page 61
SECTION 9—REAR WHEELS Part No. 1073955 61 Orbit ™ SECTION 9—REAR WHEELS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. Removing/Installing Rear Wheels NOTE: For this proced ure, ref er to FIGURE 9.1 ...
-
Invacare 1073955 - page 62
SECTION 9—REAR WHEELS Orbit ™ 62 Part No. 107395 5 FIGURE 9.1 Removing/Installing Rear Wheels Adjusting the Quick-Release Axle NOTE: For this proced ure, ref er to FIGURE 9.2. 1. Remove rear wheel and quick ‐ release axle from the wheelchair . Refer to Removing/Installing ...
-
Invacare 1073955 - page 63
SECTION 9—REAR WHEELS Part No. 1073955 63 Orbit ™ Replacing Handrims Non-Projection Handrims NOTE: For this proced ure, ref er to FIGURE 9.3. NOTE: The following procedur es will work for any type of pr ojection handrim. Removing Non-Projection Handrims 1. Remove rear w ...
-
Invacare 1073955 - page 64
SECTION 9—REAR WHEELS Orbit ™ 64 Part No. 107395 5 Installing Projection Handrims 1. If necessary , remove rear wheels from the wheelchair . Refer to Removing/Installing Rear Wheels on page 61. 2. If necessary , remove the existing handrim from the rear ...
-
Invacare 1073955 - page 65
SECTION 10—ANTI-TIPPE RS/WHEEL LOCKS Part No. 1073955 65 Orbit ™ SECTION 10—ANTI-TIPPERS/WHEEL LOCKS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. Foot Activated Wheel Lock Procedures NOTE: For this proced ure, ? ...
-
Invacare 1073955 - page 66
SECTION 10—ANTI-TIPPERS/WHEEL LOCKS Orbit ™ 66 Part No. 107395 5 FIGURE 10.1 Foot Activated Wheel Lock Procedures Hand Activated Wheel Lock Procedures Installing/Removing Hand Activated Wheel Locks NOTE: For this proced ure, ref er to FIGURE 10.3 on page 67. 1. Remove the foot activ ated wheel ...
-
Invacare 1073955 - page 67
SECTION 10—ANTI-TIPPE RS/WHEEL LOCKS Part No. 1073955 67 Orbit ™ Engaging/Disengaging Hand Activated Wheel Locks NOTE: For this proced ure, ref er to FIGURE 10.3. 1. Push handle forw ard aw ay from tire to engage wheel locks. 2. Pull handle back tow ard tire to ...
-
Invacare 1073955 - page 68
SECTION 10—ANTI-TIPPERS/WHEEL LOCKS Orbit ™ 68 Part No. 107395 5 FIGURE 10.4 Adjusting the Wheel Lock Installing Anti-Tippers NOTE: For this proced ure, ref er to FIGURE 10.5. NOTE: A 1/2 ‐ inch clearance between the bottom of the anti ‐ tipper wheels and the floor ...
-
Invacare 1073955 - page 69
SECTION 10—ANTI-TIPPE RS/WHEEL LOCKS Part No. 1073955 69 Orbit ™ Adjusting Anti-Tippers NOTE: For this proced ure, ref er to FIGURE 10.6. NOTE: The anti ‐ tippers must maintain a 1 ‐ 1/2 to 2 ‐ inch clearance between the bottom of the anti ‐ tipper w ...
-
Invacare 1073955 - page 70
SECTION 11—RECLINER Orbit ™ 70 Part No. 107395 5 SECTION 11—RECLINER WARNING After any adjustments, repair or service and before us e, make sure all attaching hardware is tightened securely. Othe rwise injury or damage may occur. Engaging Tilt-In-Space WARNING After ANY adjustments, repair or service an d before u se, make sure all at ...
-
Invacare 1073955 - page 71
SECTION 11—RECLINER Part No. 1073955 71 Orbit ™ WARNING Before using the recliner op tion, make sure the anti-tip per wheel assemblies are in the lowest adjustment ho le (adjustment hole clo sest to the ground/floor.) Before using ANY recline position of this wheelchair, make sure the rear wheels are in the most rearward position to main ta ...
-
Invacare 1073955 - page 72
SECTION 11—RECLINER Orbit ™ 72 Part No. 107395 5 FIGURE 11.1 Engaging Tilt-In-Space Operating Recliner WARNING Pinch Points exist between sp reader bar and gas cylinder s. Use caution, otherwise injury may occur. NOTE: For this proced ure, ref er to FIGURE 1 1.2 on page 73. 1. Make sure the wh ...
-
Invacare 1073955 - page 73
SECTION 11—RECLINER Part No. 1073955 73 Orbit ™ 7. When the back reaches desired angle, slowly release the handles of the recliner cable assemblies. 8. T o return the back to the full upri ght position, reverse the above steps keeping ...
-
Invacare 1073955 - page 74
SECTION 11—RECLINER Orbit ™ 74 Part No. 107395 5 Adjusting Posterior (Rearward) Limit Stops NOTE: For this proced ure, ref er to FIGURE 1 1.3 WARNING Contact a heal thcare professional or assistant for allowab le tilt angles that are suitable for the occu pant. 1. Engage both wheel locks. 2. Tilt whee ...
-
Invacare 1073955 - page 75
SECTION 11—RECLINER Part No. 1073955 75 Orbit ™ FIGURE 11.4 Replacing Upholstery ( Recliner Models Only) Adjusting the Back Height - Recliner Models Only NOTE: For this proced ure, ref er to FIGURE 1 1.5. 1. If necessary , remove the rear wheels. Refer to Removing/Installing Rear W ...
-
Invacare 1073955 - page 76
SECTION 12—TRANSPORT READY OPTION Orbit ™ 76 Part No. 107395 5 SECTION 12—TRANSPORT READY OPTION WARNING Contact Invacare Corporation (800-333-690 0) with any question s about using this wheelchair for seating in a moto r vehicle. When feasible, wheelc hair occupants s hould transfer into the vehicle seat and use the OEM (Original Equipme ...
-
Invacare 1073955 - page 77
SECTION 12—TRANSPORT READY OPTION Part No. 1073955 77 Orbit ™ About Transport Ready Packages TRRO includes four factory ‐ installed transport brackets and a wheelchair anchored pelvic belt. TRRO has been crash ‐ tested in accordance with ANSI/RESNA WC Vo l ? ...
-
Invacare 1073955 - page 78
SECTION 12—TRANSPORT READY OPTION Orbit ™ 78 Part No. 107395 5 Securing the Wheelchair to the Vehicle Positioning the Wheelchair in the Vehicle WARNING This wheelchair must be in a forward facing positi on during travel in a motor vehicle. The recommended clear zones for wheelchai r seated occupants restraine d by both pelvic and upper tors ...
-
Invacare 1073955 - page 79
SECTION 12—TRANSPORT READY OPTION Part No. 1073955 79 Orbit ™ Securement Points FIGURE 12.1 Securement Points Securing the Wheelchair This wheelchai r is to be used only with Wheelchair Tie ‐ down and Occupant Restraint Systems (WTORS) that have been installed in ...
-
Invacare 1073955 - page 80
SECTION 12—TRANSPORT READY OPTION Orbit ™ 80 Part No. 107395 5 Securing the Occupant Vehicle-Anchored Belts NOTE: For this proced ure, ref er to FIGURE 12.2. This wheelchai r has an ov erall rating of “B” with regard to accommodating the use and fit ...
-
Invacare 1073955 - page 81
SECTION 12—TRANSPORT READY OPTION Part No. 1073955 81 Orbit ™ Positioning Belts WARNING The angle of the pelvic belt should be within the preferre d zone of 45 to 75 degrees to the horizontal or within the optional zo ne of 30 to 45 degrees to the horizontal. Steeper side-view pelvic belt angle s are especially important if the pelvic belt ...
-
Invacare 1073955 - page 82
SECTION 13—OPTIONS Orbit ™ 82 Part No. 107395 5 SECTION 13—OPTIONS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely. Othe rwise injury or damage may occur. RECLINER MODELS ONLY - If the ventilato r, ventilator battery, or ventilator tray option is removed, the reclin ...
-
Invacare 1073955 - page 83
LIMITED WARRANTY Part No. 1073955 83 Orbit ™ LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABL E TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser who purchases this produc t when new and unused from Invacare or a dealer . This warranty is not ...
-
Invacare 1073955 - page 84
Invacare Corporation www.invacare.com USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800-668-5324 Invacare, the Medallion Design, and Yes, you can. are register ed trademarks of Invacare Corporation. Orbit is a trademark of Invaca re Corporation. Loctite is a regist ...
Hai una domanda su Invacare 1073955?
Utilizza il modulo sottostante
Se non hai risolto il problema con Invacare 1073955 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Invacare 1073955 è probabile che voglia condividere il modo di risolverlo.