Italiano dropdown-ico

Manuale per l’uso Snapper SAC55140BV

27 pagine 1.37 mb
Scarica

Vai alla pagina of 27

Summary
  • Snapper SAC55140BV - page 1

    OPERA T OR’S MANU AL 5/14 Series Mfg. No. Description 85637 Model SAC55140BV, 5HP Chipper Shredder 1692203 Model 5/14, 5HP Chipper Shredder 1692352 Model 5/14, 5HP Chipper Shredder (Export) 1692722 Model 5/14, 5HP Chipper Shredder (Export) 9050100 Model 5/14, 5HP Chipper Shredder 8/14 Series Mfg. No. Description 1692330 Model 8/14, 8HP Chipper Sh ...

  • Snapper SAC55140BV - page 2

    1 T able Of Contents MODEL IDENTIFICA TION ........................................1 SAFETY RULES General ...............................................................2 Setting Up ...........................................................2 Operating Location ..............................................3 Safe Wearing Apparel ................... ...

  • Snapper SAC55140BV - page 3

    DANGER You must read and understand this manual and all safety instructions and labeling completely, before attempting to assemble, set-up, trans- port, operate, service, or install any options or accessories on this unit. This chipper/shredder is a powerful machine designed for chipping of tree limbs and branch- es up to 2-1/2" in diameter (3 ...

  • Snapper SAC55140BV - page 4

    DANGER SPARK/FIRE HAZARD GAS ENGINES MAY REQUIRE A SPARK ARRESTER FOR SAFE OPERATION If the engine on this unit is not equipped with a spark arrester and is to be used on any forest, brush, or grass-covered unimproved land, a spark arrester must be added to the muffler before using the engine on such land. The arrester must be maintained in effecti ...

  • Snapper SAC55140BV - page 5

    4 Safety Rules OPERA TING SAFETY 1. Always obey the size limitations for tree limbs and branches stated in the Waste Materials Guide portion of this manual. 2. Never leave the machine running unattended. Always turn off the engine, wait for the rotor to come to a complete stop, and disconnect the spark plug before leaving the area. Always move the ...

  • Snapper SAC55140BV - page 6

    fuel leakage, and unwanted transfer of the sump oil into the cylinder head area. 3. Always refill the oil sump with the recommended oil before attempting to use the unit again after it has been drained for transportation. 4. Always observe safe refueling and fuel handling prac- tices when refueling the unit after transportation or storage. 5. Alway ...

  • Snapper SAC55140BV - page 7

    6 Assembly GENERAL All of the major assembly procedures on your new Chipper/Shredder were performed at the factory, and only the items listed in this section need to be taken care of to make your unit fully operational. T OOLS REQUIRED - 1/2" Box Wrench or Socket - 7/16" Box Wrench or Socket - 1/4" Hex Wrench HARDW ARE DESCRIPTION Th ...

  • Snapper SAC55140BV - page 8

    7 Assembly HOPPER 1. Attach the hopper to the rotor housing, using care to engage the metal lip of the hopper liner to the inside of the housing as shown in figure 3. 2. Secure the hopper to the rotor housing using (2) 5/16 x 1/2 hex head bolts and (2) 5/16 flat washers. Do not tighten hardware at this time. 3. See figure 4. From the inside of the ...

  • Snapper SAC55140BV - page 9

    C. Bag The two-bushel bag is standard equipment and attaches in seconds for direct, one-step bagging. D. The Support Leg And Wheels The sturdy support leg and wide-track wheels give your chipper/shredder a stable, 3-point stance, allowing solid positioning on virtually all surfaces. The large wheel diameter and durable rubber tread design make tran ...

  • Snapper SAC55140BV - page 10

    SPECIFICATIONS MODEL 5/14 MODEL 8/14 Horsepower 5 H.P. 8 H.P. Chipping Capacity 2 1/2" 3" Chipping Knives 2 2 Shredding Hammers 2 - Triangular 2 - Triangular 2 - J Hammers 2 - J Hammers Shredder Capacity 1/2" x 18" Long 1/2" x 18" Long Waste Reduction Ratio Up to 20:1 Up to 20:1 Weight 97 lbs. 119 lbs. Optional Equipme ...

  • Snapper SAC55140BV - page 11

    DESCRIPTION General Your new chipper/shredder is designed to permit years of trouble-free operation while handling a wide range of chipping and shredding needs. To help you get the most out of your investment, as well as to help you understand how the unit works, this section explains the basic operation of the chipper/ shredder. Chipper Operation ...

  • Snapper SAC55140BV - page 12

    CHECKS BEFORE ST ARTING 1. Inspect the chipper cone and shredder hopper for debris and other objects that may have fallen into the machine while the unit was idle, and remove them before starting the unit. Before reaching into the openings, always disconnect the spark plug wire at the spark plug. 2. Inspect the chipper cone and shredder hopper, and ...

  • Snapper SAC55140BV - page 13

    Never wrap your fingers around tree limbs and branches so tightly that you can’t let go quickly if the tree limb or branch is suddenly pulled into the chipper block or shred- der hopper area. Leaves and other lightweight organic matter can be quickly shredded in your chipper/ shredder and reduced to 1/20th of their original volume. Place material ...

  • Snapper SAC55140BV - page 14

    13 Operation MA TERIAL PROCESSING General Most materials to be processed can be handled more efficiently by observing the following chipper/shredder operating tips: Shredding 1. Don’t overload the shredder hopper by dumping large volumes of material into the hopper opening. 2. Alternate wet and dry material to prevent the dis- charge chute from b ...

  • Snapper SAC55140BV - page 15

    OPERATION TYPE OF WASTE PERMITTED SIZE LIMITATIONS NOTES Shredding Dry, moist, or wet organic Branches and twigs Alternately chip or material, including leaves, plants, up to 1/2" diameter shred wet, green flowers, fruits, vegetables. and 18" long. waste with dry waste Dry waste is more easily to avoid plugging of processed than wet waste ...

  • Snapper SAC55140BV - page 16

    Normal Care Procedures - Perform Each Item At Use Interval Shown ITEM Page 5 Hrs 25 Hrs 100 Hrs* Check For Loose Parts & Hardware 15 ● Check Oil Level And Add As Req’d 16 ● Change Oil 16 ● Change Spark Plug 16 ● Clean Engine Air Intake Area 16 ● Clean/Oil Air Filter Element 17 ● Inspect/Rotate Shredding Hammers 17 ● Clean Coolin ...

  • Snapper SAC55140BV - page 17

    Oil Level 1. Oil level must be full. Check the oil level by removing oil fill plug. Oil level should be up to the bottom of the fill plug opening (see Figure 10). 2. Add SAE 30 oil (5W30 for winter use) as necessary.. 3. Do not overfill the oil sump! Excess oil will result in frothing of oil, reducing the effectiveness of the oil and shortening eng ...

  • Snapper SAC55140BV - page 18

    Clean Engine Fins/Air Intake Area The engine that powers this chipper/shredder is air- cooled, and requires unobstructed air flow into and around the engine. For proper engine cooling, the cool- ing fins on the engine cylinder head area must also be kept clear of chipper/shredder deposits, as well as any other build-up of debris that could prevent ...

  • Snapper SAC55140BV - page 19

    Inspect/Sharpen Chipping Knives This unit’s high-quality chipping knives are manufactured from a high-quality precision tempered steel, and are designed to provide positive feeding of tree limbs and branches, as well as exceptionally long service life. Normal chipping operations will gradually wear the cut- ting edges of these blades, but the rug ...

  • Snapper SAC55140BV - page 20

    TEMPORAR Y ST ORAGE (30 Days Or Less) Remember, the chipper/shredder fuel tank probably will still contain some gasoline, so never store the chipper/ shredder indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the chipper/shredder in any structure used for human or ...

  • Snapper SAC55140BV - page 21

    SYMPTOM POSSIBLE CAUSE REMEDIES Engine won’t start. • Out of gas. • Add gas. • Spark plug wire disconnected. • Connect spark plug wire. • Engine controls set wrong. • Check engine controls and adjust. • Spark plug fouled. • Remove Spark Plug, clean, and replace. • No compression - rope pulls• • See your local dealer. without ...

  • Snapper SAC55140BV - page 22

    REP AIR Engine Service Your chipper/shredder engine requires routine mainte- nance for long-life and trouble-free operation. Consult the manufacturer’s manual provided with this unit for specific recommendations and service procedures. In general, however, your engine requires only the preven- tive maintenance indicated on the Normal Care Schedul ...

  • Snapper SAC55140BV - page 23

    22 T roubleshooting & Repair 4. Using leather work gloves to protect your hands from sharp edges, carefully rotate the rotor counterclock- wise until the first worn hammer is at the top position. 5. Before proceeding, note the assembly sequence of the hammer, spacer, spacer tube, and hardware. Hammers and spacers must be reassembled in the same ...

  • Snapper SAC55140BV - page 24

    • If the spacer tube has deep grooves worn into it, do not reuse the part - replace it using an exact factory replacement part only. • Rotate or flip the hammer to provide a new cutting edge, or install a new hammer if worn out or dam- aged. • Reassemble the hammer and related parts and hardware, observing the correct assembly sequence as sho ...

  • Snapper SAC55140BV - page 25

    24 T roubleshooting & Repair 4. Using a 1/4” hex wrench, loosen and remove the two socket head cap screws holding the chipper knife in place (access the screw heads from the rear of the unit), and remove the chipper knife. See Figure 24 for location and temporary removal of an access plug that permits removal of the capscrews. 5. See Figure 2 ...

  • Snapper SAC55140BV - page 26

    OPTIONS & ACCESSORIES Several optional items and accessories are available that can help increase the usefulness and utility of your chip- per/shredder unit: V acuum Attachment This easy-to-add accessory allows the chipper/ shredder to be equipped with a vacuum hose and other attach- ments to help simplify pick up of lightweight materials such ...

  • Snapper SAC55140BV - page 27

    MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2003 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA. ...

Fabbricante Snapper Categoria Chipper

I documenti che otteniamo dal fabbricante del dispositivoSnapper SAC55140BV possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Snapper
- manuali per l’uso SAC55140BV
- schede prodotto Snapper
- opuscoli
- o etichette energetiche Snapper SAC55140BV
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Snapper SAC55140BV.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Snapper SAC55140BV, manuali di manutenzione, brevi manuali o manuali utente Snapper SAC55140BV. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Snapper SAC55140BV.

Manuali per l’uso simili

Manuale completo del dispositivo Snapper SAC55140BV, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Snapper SAC55140BV dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Snapper SAC55140BV.

Il manuale per l’uso completo Snapper, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Snapper SAC55140BV - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Snapper SAC55140BV, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Snapper SAC55140BV che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Snapper SAC55140BV - che ci dovrebbe aiutare nei primi passi durante l'uso Snapper SAC55140BV
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Snapper SAC55140BV
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Snapper SAC55140BV in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Snapper SAC55140BV?

Utilizza il modulo sottostante

Se non hai risolto il problema con Snapper SAC55140BV con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Snapper SAC55140BV è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)