-
Haier WM6002A - page 1
WM6002A Names of the parts.............the 2nd cover Safety precautions .............................................1 Installation and adjustment .........................3 Install the water inlet hose............5 Preparation before washing ...............7 Put in the laundries .............................8 Put in the detergent ................. ...
-
Haier WM6002A - page 2
Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents. Contents marked with that symbol are actions forbidden to perform. Performing of those action may result in damage of the machine or influence the personal safety of the users. Accessor ...
-
Haier WM6002A - page 3
The ventilation holes at the bottom Before Using Before Using Safety precautions In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet. Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel coating . Do not le ...
-
Haier WM6002A - page 4
Do not put hand into the rotating tub.It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine. D ...
-
Haier WM6002A - page 5
The washing machine away from wall should be overrun 20mm.The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal. Adjust the adjus ...
-
Haier WM6002A - page 6
The drainage shall be smooth with the drain hose. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. Do not step on or press the drain hose. If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not ...
-
Haier WM6002A - page 7
The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2 Loosen the s ...
-
Haier WM6002A - page 8
Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged ...
-
Haier WM6002A - page 9
Using process Using process 1 Pr epar a tion before washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand,hairpins etc. Fasten the buttons and zippers. When the pulsator is running ,the buttons of the laundries may cause noise. For the sake of discretion ,please put the laundries with but ...
-
Haier WM6002A - page 10
Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest capacity of this machine is 6.0kg. The t ...
-
Haier WM6002A - page 11
How to use the whitener Standard dosage of the detergent and water quantity Laundries quantity (kg) Water level Water quantity Common powder, Put the washing powder and softener into the detergent box directly as indicated in the left figure. After that, please close the detergent box.Refer to the following list for the usage of the detergent : sta ...
-
Haier WM6002A - page 12
Description of the function of buttons Mode and meaning of the indicators Digital tube Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode 4 Use the oper a tion buttons Using process Using process During sensing, it displays During operation of programs, it displays the remained time (minute) ...
-
Haier WM6002A - page 13
The washing machine can detect the laundries automatically. After detection,it will set the water level to suitable value among 4, 6, 8and 10 automatically. Yo u can also set water level by yourself. Af ter the machine is started, it will not set water level automatically. Yo u shall push the start/pause button to make new setting. If there's ...
-
Haier WM6002A - page 14
SOAK WASH RINSE SPIN Push the "SOAK", "WASH", "RINSE" or "SPIN" button to select suitable procedure. After switching on the power, the machine will set standard program automatically . To select other automatic program, push the "PROGRAM" button till the relative indicator is on. Refer to the " ...
-
Haier WM6002A - page 15
Press " WA TER LEVEL "button, select suitable water level After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth. After detection, it can set the water level automatically. T o select other water level, first push the "START/P AUSE" button, then push the "WA TER LEVEL& ...
-
Haier WM6002A - page 16
Push the "START/P AUSE"button 5 Close the lid 6 Finish washing After Finishing wash alarm automatically After finishing wash it'll alarm automatically As the top lid opened ,the Wa sher will automatically give an alarm and stop running , exclusively during supplying water and rinsing. Using process Using process * Total time: includi ...
-
Haier WM6002A - page 17
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months. Using process Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the mac ...
-
Haier WM6002A - page 18
The digitron displays E0. The safety switch acts, and the spinning cannot work. The digitron displays E3. The water filling does not work, or is slow. After about 15 minutes later , the digital displays E4. The drainage cannot work, or is too slow . The digitron displays E1. It stops running in midway . The digitron displays E2. The power voltage i ...
-
Haier WM6002A - page 19
Packing list Name User's manual Quantity One One Storage position Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the package carton Inner cover component Components of the water inlet hose Inside the accessory bag Eight Tapping screws ST4x16-A Bottom plate One One ...
-
Haier WM6002A - page 20
Specification Model WM6002A Rated voltage frequency 220-240V~ 50Hz Rated washing / spinning capacity 6.0kg (weight of standard dry cloth) Water level/Water quantity (about) Max water consumption Injection pressure 0.03MPa~0.78MPa Rated washing power 380W Rated spinning power 260W Weight About 36kg Dimension L 520 mm W 520 mm H 908 mm About 75L(High ...
Hai una domanda su Haier WM6002A?
Utilizza il modulo sottostante
Se non hai risolto il problema con Haier WM6002A con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Haier WM6002A è probabile che voglia condividere il modo di risolverlo.