Italiano dropdown-ico

Manuale per l’uso Nextar IL9 PRO

40 pagine 2.23 mb
Scarica

Vai alla pagina of 40

Summary
  • Nextar IL9 PRO - page 1

    Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IL9 Pro Motherboard Socket 775 Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D  Intel 945P / ICH7  FSB1066  Dual DDR2 667  PCI Express  Gigabit LAN  4x SATA 3Gb/s  7.1 Channel HD Audio ...

  • Nextar IL9 PRO - page 2

    IL9 Pro User’s Manual English + Multilingual QIG 1 st Edition, October 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or represent ...

  • Nextar IL9 PRO - page 3

    Hardware Setup Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specifications .............................................................................. 1-1 1.2 Motherboard Layout .....................................................................1-2 1.3 Choosing a Computer Chassis .......... ...

  • Nextar IL9 PRO - page 4

    iv IL9 Pro iv IL9 Pro ...

  • Nextar IL9 PRO - page 5

    Hardware Setup 1. Hardware Setup 1.1 Specifications • 3x PCI Internal I/O Connectors CPU • Support Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D Processor with 1066MHz FSB • Supports Intel Hyper-Threading Technology Chipset • Intel 945P / ICH7 Memory • 4x 240-pin DIMM slots support maximum memory capacity up to 4GB • Supports Dual C ...

  • Nextar IL9 PRO - page 6

    1.2 Motherboard Layout 1-2 IL9 Pro ...

  • Nextar IL9 PRO - page 7

    Hardware Setup 1.3 Choosing a Computer Chassis • Choose a chassis big enough to install this motherboard. • As some features for this motherboard are implemented by cabling connectors on the motherboard to indicators and switches or buttons on the chassis, make sure your chassis supports all the features required. • If there is possibility of ...

  • Nextar IL9 PRO - page 8

    1.5 Checking Jumper Settings • For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. SHORT OPEN OPEN • For 3-pin jumper, pin 1~2 or pin 2~3 can be shorted by plugging the jumper cap in. Pin 1~2 SHORT Pin 2~3 SHORT ...

  • Nextar IL9 PRO - page 9

    Hardware Setup CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “ CMOS BATTERY HAS FAILED ” or “ CMOS checksum error ” displays on monitor, th ...

  • Nextar IL9 PRO - page 10

    1.6 Connecting Chassis Components 1.6.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATX 24-Pin Power Connector: The power supply with 20-pin or 24-pin cables can both be connecte ...

  • Nextar IL9 PRO - page 11

    Hardware Setup 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention when connectin ...

  • Nextar IL9 PRO - page 12

    1.6.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. • CPUFAN1: CPU Fan Power Connector • SYSFAN2~3: System Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 1.6.4 Chassis Speaker Connector This header provides the connection to cha ...

  • Nextar IL9 PRO - page 13

    Hardware Setup 1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. ※ In order to protect the contact pins, please pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch ...

  • Nextar IL9 PRO - page 14

    5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 6. Lower the plate onto the CPU package. Engage the load lever while gently pressing down the load plate. 7. Secure the lever ...

  • Nextar IL9 PRO - page 15

    Hardware Setup 1.7.2 DDR2 Memory Slots • To reach the optimum performance in dual-channel configurations, install identical DDR2 DIMM pairs for each channel. • Install DIMMs with the same CAS latency. To reach the optimum compatibility, obtain memory modules from the same vendor. ※ Usually there is no hardware or BIOS setup required after add ...

  • Nextar IL9 PRO - page 16

    1.7.3 PCI Express X16 Add-on Slots These slots support the connections of graphics cards that comply with PCI Express specifications. This motherboard provides dual PCI-Express X16 slots for one or two graphics cards installation: One PCIE graphics card installation (Normal Mode): Install one PCIE graphics card into [Master] slot (the PCIEX1 slot o ...

  • Nextar IL9 PRO - page 17

    Hardware Setup 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the other end to the floppy disk drives connector. Gener ...

  • Nextar IL9 PRO - page 18

    1.8.2 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by SATA cable. To connect SATA device: 1. Attach either end of the signal cable to the SATA connector on motherboard. Attach the other end to SATA device. 2. Attach the SATA power cable to the SATA device and connect the other end from the power ...

  • Nextar IL9 PRO - page 19

    Hardware Setup 1.8.3 Additional USB 2.0 Port Headers Each header supports 2x additional USB 2.0 ports by connecting bracket or cable to the rear I/O panel or the front-mounted USB ports of your chassis. Pin Pin Assignment Pin Pin Assignment 1 VCC 2 VCC 3 Data0 - 4 Data1 - 5 Data0 + 6 Data1 + 7 Ground 8 Ground 10 NC ※ Make sure the connecting cabl ...

  • Nextar IL9 PRO - page 20

    1.8.5 Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. • To use the audio connector at front panel, remove all the jumpers on this header, and then connect to front panel by the extension cable provided with the chassis. • To use the audio connector at rear panel, disconnect the extensio ...

  • Nextar IL9 PRO - page 21

    Hardware Setup 1.8.6 PCI and PCI Express X1 Slots Install PCI Express X1 card into slot “PCI-E1”. Install PCI cards into slots “PCI1”, “PCI2”, and/or “PCI3”. ※ Slot PCI-E1 will be disabled when slot PCIEX2 is installed. IL9 Pro 1-17 ...

  • Nextar IL9 PRO - page 22

    1.9 Connecting Rear Panel I/O Devices The rear I/O part of this motherboard provides the following I/O ports: • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • LPT1: Connects to printer or other devices that support this communication protocol. • COM1: Connects to external modem, mouse or other devices that support t ...

  • Nextar IL9 PRO - page 23

    BIOS Setup IL9 Pro 2-1 2. BIOS Setup This motherboard provides a programmable EEPROM so that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a program that deals with the basic level of communication between processor and peripherals. Use the BIOS Setup program only when installing motherboard, reconfiguring system, or prom ...

  • Nextar IL9 PRO - page 24

    2-2 IL9 Pro ...

  • Nextar IL9 PRO - page 25

    Driver & Utility IL9 Pro 3-1 3. Driver & Utility The “Driver & Utility CD” that came packed with this motherboard contains drivers, utilities and software applications required for its basic and advanced features. Place the “Driver & Utility CD” into the CD-ROM drive in your system. The following installation auto-run screen ...

  • Nextar IL9 PRO - page 26

    3-2 IL9 Pro 3-2 IL9 Pro ...

  • Nextar IL9 PRO - page 27

    Multilingual QIG IL9 Pro 4-3 4. Multilingual Quick Installation Guide 4.1 繁體中文 4.1.1 規格 處理器 • 支援具備 1066MHz 前端匯流排的 Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D 處理器 • 支援 Intel Hyper-Threading 技術 晶片組 • Intel 945P / ICH7 記憶體 • 4 條 240 針腳 DIMM 插槽支援最大 4GB 記? ...

  • Nextar IL9 PRO - page 28

    4.1.2 快速安裝指南 本 「快速安裝指南」 僅包含安裝 abit 主機板時 所需的基本硬體資訊。詳細的操作方式，請參 閱完整的手冊版本。 硬體安裝注意事項 • 安裝機板或變換任何設定之前，請先關閉電源並拔 掉電源插頭。 • 從抗靜電袋中取出機板前，請先戴上靜電 ...

  • Nextar IL9 PRO - page 29

    Multilingual QIG IL9 Pro 4-5 附加的 USB 連接埠接頭： [FP-USB1] 、 [FP-USB2] 除了位於 I/O 面板上的內建 USB 接頭外，您可透過帶 有支架的延長線，連接這些各有兩個附加 USB 連接埠 的接頭。 針腳 針腳定義 針腳 接腳定義 1 VCC 2 VCC 3 負資料通道 0 4 負資料通道 1 5 正資料通道 0 6 ...

  • Nextar IL9 PRO - page 30

    4-6 IL9 Pro 4-6 IL9 Pro ...

  • Nextar IL9 PRO - page 31

    Multilingual QIG IL9 Pro 4-7 4.2 简体中文 4.2.1 规格 处理器 • 支持具备 1066MHz 前端总线的 Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D 处理器 • 支持 Intel 超线程技术 芯片组 • Intel 945P / ICH7 内存 • 4 条 240 针脚 DIMM 插槽支持最大 4GB 内存容量 • 支持双信道 DDR2 667 无缓冲非 ECC ...

  • Nextar IL9 PRO - page 32

    4.2.2 快速安装指南 本“快速安装指南”仅包含基本的硬件信息， 供您在安装 abit 主板时进行参考 。 如需了解高 级操作，请参阅其详细指南。 硬件设置注意事项 • 在安装主板或更改任何设置前，务必关闭电源并从 交流插座上拔掉电源线。 • 从防静电袋中取出主 ...

  • Nextar IL9 PRO - page 33

    Multilingual QIG IL9 Pro 4-9 附加的 USB 端口接头： [FP-USB1] 、 [FP-USB2] 除了位于 I/O 面板上的板载 USB 连接器外，这些接头 可以通过带线卡的延长电缆分别提供两个附加的 USB 端口连接。 针脚 针脚定义 针脚 针脚定义 1 VCC 2 VCC 3 负数据通道 0 4 负数据通道 1 5 正数据通道 0 6 ? ...

  • Nextar IL9 PRO - page 34

    4-10 IL9 Pro 4-10 IL9 Pro ...

  • Nextar IL9 PRO - page 35

    Appendix IL9 Pro 5-1 5. Appendix 5.1 Troubleshooting (How to Get Technical Support?) 5.1.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer system? A: Yes, we highly recommend that you clear the CMOS before installing a new motherboard. Please move the CMOS jumper from its default 2-3 position to 1 ...

  • Nextar IL9 PRO - page 36

    Q: How to get a quick response for my request on technical support? A: Please carry out a simple troubleshooting before sending “ Technical Support Form ”: System boot-up fails after the system had been assembled: Check the motherboard’s supporting specifications first to see if all the key components attached in your system can meet. To do s ...

  • Nextar IL9 PRO - page 37

    Appendix IL9 Pro 5-3 • Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2.5-3-3-7 @533MHz • Graphics information: Note Graphics card’s brand, model and driver version • Graphics card: Type in the brand and model name of your graphics card. Example: ATI RADEON X850 XT PE • Graphics driver vers ...

  • Nextar IL9 PRO - page 38

    5.1.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: 5-4 IL9 Pro ...

  • Nextar IL9 PRO - page 39

    Appendix IL9 Pro 5-5 5.1.3 Contact Information Taiwan Head Office Universal ABIT Co., Ltd. No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-3380 Fax: 886-2-8751-3381 Sales: sales@abit.com.tw Marketing: market@abit.com.tw North America, South America Universal ABIT (USA) Corporation 2901 Bayview Drive, Fremont, CA 94538, U.S.A. Te ...

  • Nextar IL9 PRO - page 40

    P/N: 4310-0000-50 Rev. 1.00 http://www.abit.com.tw ...

Fabbricante Nextar Categoria Computer Hardware

I documenti che otteniamo dal fabbricante del dispositivoNextar IL9 PRO possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Nextar
- manuali per l’uso IL9 PRO
- schede prodotto Nextar
- opuscoli
- o etichette energetiche Nextar IL9 PRO
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Nextar IL9 PRO.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Nextar IL9 PRO, manuali di manutenzione, brevi manuali o manuali utente Nextar IL9 PRO. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Nextar IL9 PRO.

Manuali per l’uso simili

Manuale completo del dispositivo Nextar IL9 PRO, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Nextar IL9 PRO dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Nextar IL9 PRO.

Il manuale per l’uso completo Nextar, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Nextar IL9 PRO - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Nextar IL9 PRO, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Nextar IL9 PRO che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Nextar IL9 PRO - che ci dovrebbe aiutare nei primi passi durante l'uso Nextar IL9 PRO
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Nextar IL9 PRO
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Nextar IL9 PRO in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Nextar IL9 PRO?

Utilizza il modulo sottostante

Se non hai risolto il problema con Nextar IL9 PRO con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Nextar IL9 PRO è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)