Manuale per l’uso Marantz VP12S1

30 pagine 3.08 mb
Scarica

Vai alla pagina of 30

Summary
  • Marantz VP12S1 - page 1

    Model VP-12S1 User Guide DLP TM Projector www.htrgroup.com R ...

  • Marantz VP12S1 - page 2

    The lightning symbol in the triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark in the triangle is intended to alert the user to the presence of important operating a ...

  • Marantz VP12S1 - page 3

    IMPOR T ANT SAFETY INSTR UCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operational precautions which you should be particularly aware of. 1 . Read these Instructions: All the safety and operating instructions should be read be ...

  • Marantz VP12S1 - page 4

    ENGLISH FEATURES ................................................................................................................... 1 PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW ........................................... 2 Front and Top .................................................................................................... 2 Right Side ...

  • Marantz VP12S1 - page 5

    1 ENGLISH FEATURES 7 Optics • Texas Instruments Digital Light Processing Technology • High Definition Panel (1280 x 720), DMD TM HD • 16 : 9 Aspect Ratio • Newly developed custom optics by Minolta • 1200 : 1 Contrast Ratio • 700 ANSI Lumens Brightness • Brightness Uniformity : 90 % • No Halo Effect • Lens Up/Down Shift constructio ...

  • Marantz VP12S1 - page 6

    2 ENGLISH q IR sensor (front and rear) w Projection Lens e V entilation holes Notes: • Do not place anything near the ventilation holes to avoid overheat inside the unit. • Do not place your hand or objects near the ventilation holes; the air is coming out. r Adjustable feet Adjust the vertical angle of the projector. t Focus ring Adjust the pi ...

  • Marantz VP12S1 - page 7

    3 INTRODUCTION ENGLISH z COMPONENT VIDEO IN Y, P B /C B , P R /C R connectors. Connect the COMPONENT VIDEO output from video equipment or an A/V processor/receiver with a component video output. x S-VIDEO IN Connect the S-VIDEO output from a video equipment. c VIDEO IN Connect the composite video output from a video equipment. v RGB IN Connect the ...

  • Marantz VP12S1 - page 8

    4 ENGLISH ⁄1 TRIG.2(TRIGGER 2) Select ON or OFF at each aspect mode, such as Full, Normal, Zoom, and Through to control screen aspect ratio with powered up/down dual aspect ratio screen. Note: Do not use TRIG.1 and TRIG.2, as the power source. ⁄2 LIGHT ON/OFF Select ON : The connector panel lights up. ⁄3 RS232C Connect the RS232C of equipment ...

  • Marantz VP12S1 - page 9

    5 INTRODUCTION ENGLISH Height Adjustment How to use adjustable feet and adjustment lever. (1) Release the adjustable feet. (2) Detail adjustment PRESS DOWN DOWN UP Note : Lift the unit up carefully. q q w Bottom q Adjustment lever Lift the projector and turn the adjustment lever right or left. The adjustable feet will extend from the projector. The ...

  • Marantz VP12S1 - page 10

    6 ENGLISH a PO WER ON key Turn the projector on. s ST ANDBY key Turn the projector off. d 3 / 4 / 1 / 2 keys Control the MENU cursor. f ENTER key Confirm "Reset All", "Reset Lamp Life", "New Lamp?". g MENU key Display the on-screen menu. h COMPONENT key Select the COMPONENT VIDEO IN signal. j S-VIDEO key Select the S-V ...

  • Marantz VP12S1 - page 11

    7 INTRODUCTION ENGLISH 1. Open the cover. 2. Insert batteries (AA). Make sure to match the + and – marks on the batteries with inside the battery compartment. 3. Close the cover. CAUTION – The available battery types are limited: manganese dry cell and alkaline dry cell. – Do not mix different battery types. – Do not mix old and new batteri ...

  • Marantz VP12S1 - page 12

    8 ENGLISH VP-12S1 Adjust the vertical and horizontal positions of the projector. Side view Flat view INSTALLATION Recommended Setting CAUTION – For ceiling installation, consult with Marantz authorized dealer. – Do not look into the lens when the projector is turned on. It could damage your eyesight. Horizontal center of the screen Throw distan ...

  • Marantz VP12S1 - page 13

    9 SET UP PROCEDURES ENGLISH VP-12S1 40 inch 60 inch 80 inch 100 inch 120 inch 150 inch 200 inch 250 inch 50 7 / 16 inch 1,281 mm 76 9 / 16 inch 1,945 mm 102 3 / 4 inch 2,609 mm 128 7 / 8 inch 3,273 mm 155 inch 3,938 mm 194 1 / 4 inch 4,934 mm 259 5 / 8 inch 6,594 mm 325 inch 8,255 mm Screen Size (Diagonal) 16:9 screen Throw distance Minimum Maximum ...

  • Marantz VP12S1 - page 14

    10 ENGLISH You can adjust the image position with the Lens Shift knob. 7 Turn the Lens Shift knob to clockwise : The image goes up. • Maximum range to throw up : Bottom of the image correspond to the center of the Projection Lens. 7 Turn the Lens Shift knob to counterclockwise : The image goes down. • Maximum range to throw down : Top of the im ...

  • Marantz VP12S1 - page 15

    11 SET UP PROCEDURES ENGLISH When the projecting image is a trapezoid, correct it in Keystone-V and/or Keystone-H in the Display Menu. 7 Keystone-V(Electronic vertical keystone correction) Adv anced Setting 7 Keystone-H(Electronic horizontal keystone correction) Note : Electronic horizontal keystone correction works properly when the lens shift pos ...

  • Marantz VP12S1 - page 16

    12 ENGLISH • Press the ZOOM key, the NORMAL key or the FULL key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. • Press the FULL key on the remote controller for the squeezed video source. 7 Full mode ...

  • Marantz VP12S1 - page 17

    13 SET UP PROCEDURES ENGLISH • Press the ZOOM key, the NORMAL key or the FULL key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. • Press the FULL key on the remote controller for the squeezed video s ...

  • Marantz VP12S1 - page 18

    14 ENGLISH DV D VCR S-VIDEO OUT VIDEO OUT COMPONENT VIDEO OUT Computer HD Set T op Bo x / BS T uner RGB OUT RGB OUT When making connections be sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the plug properly. Any plugs that are not fully inserted often generate a noise. W ...

  • Marantz VP12S1 - page 19

    15 SET UP PROCEDURES ENGLISH Receiver equipment with a Dolby Digital decoder DIGIT AL A UDIO IN D V -SD OUT DV camcoder Connection with a D V camcoder Note: DV IN connector is available for DV-SD format of i.LINK(IEEE1394). Receiver equipment with a Dolby Digital decoder REMO TE CONTROL IN REMO TE CONTROL OUT External Controller RS-232C 35mm Mini P ...

  • Marantz VP12S1 - page 20

    16 ENGLISH 1. Connect the supplied AC power cord. The STANDBY indicator lights up and the projector goes into the standby mode. 2. Press the POWER ON key on the remote controller or the POWER key on the projector. The POWER indicator lights up. 3. Press the FOCUS key on the remote controller to display the FOCUS pattern and turn the Focus ring to m ...

  • Marantz VP12S1 - page 21

    17 OPERATIONS ENGLISH Adjust the picture to suit own preference by using the Picture Adjust feature. 7 For a video signal input, the following adjustments can be made: NOTE: The user cannot adjust Tint in Component signal (YC B C R /YP B P R ). – Contrast Use 1 / 2 key to adjust. Use 3 / 4 key to go back to the MENU. Contrast 50 The following set ...

  • Marantz VP12S1 - page 22

    18 ENGLISH The following adjustments can be made: 7 OSD Position (16:9 / 4:3 / Through ) 7 Language (English/ German/ French/ Spanish/ Portuguese/ Italian) 7 Ceiling (On/Off) ON: The picture is reversed horizontally and vertically. 7 Rear (On/Off) ON: The picture is reversed horizontally. 7 Reset Lamp Life (Yes/No) 7 Reset All (Yes/No) – OSD Posi ...

  • Marantz VP12S1 - page 23

    19 OPERATIONS ENGLISH Select 12V DC or 0V from on and off at each aspect mode. Full, Normal, Zoom, and Through. On: Output DC 12V. Off: No output. This allows such as a powered dual aspect screen according to the aspect mode. T rigger2 – Reset Lamp Life When replace the lamp unit, before the Lamp Life becomes "0" hours need to reset lam ...

  • Marantz VP12S1 - page 24

    20 ENGLISH Lamp Life Display the remaining lamp life by pressing the INFO key on the remote controller. Notes: • When the Lamp Life becomes less than 100 hours , it is recommended to replace the lamp unit. A lamp may be worn out when the Lamp Life becomes less than 100 hours . • The projector is designed not to turn on after the lamp use has ex ...

  • Marantz VP12S1 - page 25

    21 ADDITIONAL INFORMATION ENGLISH CAUTION: • Do not touch the lamp and the lamp unit immediately. It will be extremely hot. Allow at least one hour for the lamp to cool down before handling. • Do not loosen any screws except for those mentioned below. • The lamp may break if handled improperly. • Do not use other than a Marantz replacement ...

  • Marantz VP12S1 - page 26

    22 ENGLISH No power Image is not displayed. Poor color. Picture is too dark. Picture is not clear. Picture rolls. The Remote Controller does not work. AC power cord is not connected correctly. Lamp cover is not closed correctly. A signal cable is not connected correctly. Selected input is incorrect. The picture mute is active. Picture is not adjust ...

  • Marantz VP12S1 - page 27

    23 ADDITIONAL INFORMATION ENGLISH 7 Optical characteristics Panel 0.85inch 16:9 1,280 x 720 pixels Digital Micromirror Device TM Lamp Super High Pressure 150W Lens f: 26.5 to 30.7 / F: 3.0 Projection size 40 to 250 inches Light output 700 ANSI LUMEN typical 7 INPUT/OUTPUT VIDEO IN RCA x 1 NTSC-3.58/PAL-4.43/SECAM Composite video 1.0V p-p /75 Ohm S- ...

  • Marantz VP12S1 - page 28

    24 ENGLISH 7 Timing chart NTSC P AL-B/G SECAM 480/60p 576/50p 1035/60i 1080/60i 1080/50i 1080/48i 720/60p 720/50p 720/48p 540/60p 640x350 #1 640x350 #1 640x400 #1 640x400 #1 640x480 640x480 #1 640x480 #1 640x480 #1 800x600 800x600 800x600 #1 800x600 #1 800x600 #1 1024x768 1024x768 1024x768 #1 1024x768 #1 1024x768 #1 768x240 960x287.5 960x287.5 720x ...

  • Marantz VP12S1 - page 29

    25 ADDITIONAL INFORMATION ENGLISH (346.5 mm) 13 5/8 inch (344 mm) 13 3/8 inch (19.8 mm) 3/4 inch (110 mm) (93.5 mm) 4 5/16 inch 3 11/16 inch (124.5 mm) 4 7/8 inch (127 mm) 5 inch (421 mm) 16 9/16 inch 471 mm 18 9/16 inch (132 mm) 5 3/16 inch (404.5 mm) 15 15/16 inch (222 mm) 8 3/4 inch (182.5 mm) 7 3/16 inch (222 mm) 8 3/4 inch (182.5 mm) 7 3/16 in ...

  • Marantz VP12S1 - page 30

    COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd., 24 Lionel Road, Mt. Waverley, VIC 3149, Australia AUSTRIA Huber & Prohaska GmbH Taborstra ß e 95 / Ladestra ß e 1, Geb ä ude Hangartner, A-1200 Wien, Austria ...

Fabbricante Marantz Categoria Projector

I documenti che otteniamo dal fabbricante del dispositivoMarantz VP12S1 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Marantz
- manuali per l’uso VP12S1
- schede prodotto Marantz
- opuscoli
- o etichette energetiche Marantz VP12S1
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Marantz VP12S1.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Marantz VP12S1, manuali di manutenzione, brevi manuali o manuali utente Marantz VP12S1. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Marantz VP12S1.

Manuali per l’uso simili

Manuale completo del dispositivo Marantz VP12S1, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Marantz VP12S1 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Marantz VP12S1.

Il manuale per l’uso completo Marantz, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Marantz VP12S1 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Marantz VP12S1, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Marantz VP12S1 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Marantz VP12S1 - che ci dovrebbe aiutare nei primi passi durante l'uso Marantz VP12S1
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Marantz VP12S1
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Marantz VP12S1 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Marantz VP12S1?

Utilizza il modulo sottostante

Se non hai risolto il problema con Marantz VP12S1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Marantz VP12S1 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)