Manuale per l’uso JVC KD-S7250

23 pagine 4.19 mb
Scarica

Vai alla pagina of 23

Summary
  • JVC KD-S7250 - page 1

    ENGLISH INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTRUCTIONS GET0058-001A [J] ESP AÑOL FRANÇAIS For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. For installation and connections, refer to the separate manu ...

  • JVC KD-S7250 - page 2

    2 ENGLISH How to reset your unit Press and hold both the SEL (Select) and (Standby/On/A TT) b uttons at the same time for se ver al seconds. This will reset the built-in microcomputer . NOTES: Y our preset adjustments — such as preset channels or sound adjustments — will also be erased. If a CD is in the unit, it will eject when you reset the u ...

  • JVC KD-S7250 - page 3

    3 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BEFORE USE * For safety .... • Do not raise the volume level too much, as this will block outside sounds, making driving danger ous. ? ...

  • JVC KD-S7250 - page 4

    4 ENGLISH e y t r i u w q 5 6 4 3 1 2 7 8 9 p o a g d ; s f h j k l LOCA TION OF THE BUTTONS Control panel Display window 1 (standby/on/attenuator) b utton 2 Control dial 3 LOUD (loudness) button 4 DISP (display) b utton 5 Display windo w 6 Loading slot 7 CD button 8 FM button 9 0 (eject) button p 4 / ¢ buttons • Also functions as SSM buttons wh ...

  • JVC KD-S7250 - page 5

    5 ENGLISH 1 2 3 4 6 7 5 RM-RK31 3 • Functions as the PRESET button while listening to the radio. Each time you press the b utton, the preset station number increases, and the selected station is tuned into . • Does not function as the DISC – b utton. 4 Functions the same as the control dial on the main unit. NOTE: These buttons cannot be used ...

  • JVC KD-S7250 - page 6

    6 ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing the battery When the controllable range or eff ...

  • JVC KD-S7250 - page 7

    7 ENGLISH BASIC OPERA TIONS 4 Adjust the sound as you want (see pages 14 – 16). T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume level will drop in a moment. T o resume the previous v olume level, press the button briefly again. • If you turn the control dia ...

  • JVC KD-S7250 - page 8

    8 ENGLISH RADIO BASIC OPERA TIONS T o stop searching bef ore a station is received, press the same button you have pressed for searching. Searching a station manually: Manual search 1 Select the band (FM1 – 3, AM). Note: This r eceiver has three FM bands (FM1, FM2, FM3). Y ou can use any one of them to listen to an FM br oadcast. 2 Press and hold ...

  • JVC KD-S7250 - page 9

    9 ENGLISH 3 T une into a station you want while “ M ” is flashing. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds. • If you hold down the button, the frequency keeps changing. When an FM stereo broadcast is hard to receive: Press MO RND (monaural/random) while listening to an FM ste ...

  • JVC KD-S7250 - page 10

    10 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1 – 3, AM) you want to store FM stations into (in this example, FM1). • Each time you press the button, the FM band changes as follows: 2 T u ...

  • JVC KD-S7250 - page 11

    11 ENGLISH Playing a CD 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playbac k automatically . Note: • When a CD is inserted upside down, the CD automatically ejects. CD OPERA TIONS T o stop play and eject the CD Press 0 . CD play stops and the CD automatically ejects from the loading slot. If you change the sou ...

  • JVC KD-S7250 - page 12

    12 ENGLISH Selecting CD playback modes T o play back tracks at random (Random Play) Y ou can pla y back all trac ks on the CD at random. Each time you press MO RND (monaural/random) while playing a CD, CD random play mode turns on and off alternately . When the random mode is turned on, the RND indicator lights up on the display and a track randoml ...

  • JVC KD-S7250 - page 13

    13 ENGLISH Prohibiting CD ejection Y ou can prohibit CD ejection and can loc k a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. T o cancel the prohibition and unloc k the CD, press and hold CD and 0 again for more than 2 sec ...

  • JVC KD-S7250 - page 14

    14 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: Indication T o do: Range BAS Adjust the bass. – 06 (min.) (Bass) | +06 (max.) TRE Adjust the treble. – 06 (min.) (T reble) | ...

  • JVC KD-S7250 - page 15

    15 ENGLISH • When “ SCM LINK ” is set to “ LINK ON ” , the selected sound mode can be stored in memory for the current source and the eff ect applies only to the current source. • When “ SCM LINK ” is set to “ LINK OFF ” , the selected sound mode effect applies to an y source. Recalling the sound modes When “SCM LINK” is set ...

  • JVC KD-S7250 - page 16

    16 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes (BEA T , SOFT , POP) to your preference and store your own adjustments in memor y . • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Call up the sound mode you want to adjust. • See page ...

  • JVC KD-S7250 - page 17

    17 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL ” appears on the display . 2 Set the hour . 1 Select “CLOCK H” if not shown on the display . 2 Adjust the hour . 3 Set the minute. 1 Select “CLOCK M”. 2 Adjust the minute. 4 Pres ...

  • JVC KD-S7250 - page 18

    18 ENGLISH Selecting the level display Y ou can select the le vel displa y according to your preference. When shipped from the factory , “A UDIO 2” is selected. A UDIO 1: Lev el meter illuminates from bottom to top. A UDIO 2: Alter nates lev el meter (mov es from bottom to top) and illumination display . OFF: Erases the audio le vel indicator . ...

  • JVC KD-S7250 - page 19

    19 ENGLISH Detaching the control panel Y ou can detach the control panel when lea ving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . How to detach the control panel Before detaching the control panel, be sure to turn off the power . 1 Unloc ...

  • JVC KD-S7250 - page 20

    20 ENGLISH MAINTENANCE Handling CDs This unit has been designed only to reproduce the CDs bearing the following marks. Y ou can also pla y back y our original CD-Rs (Recordable) and CD-R Ws (Rewritable) on this receiver . This unit is not compatible with MP3. How to handle CDs When removing a CD from its case, press do wn the center holder of the c ...

  • JVC KD-S7250 - page 21

    21 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • CD cannot be played back. • CD sound is sometimes interrupted. • Sound cannot be heard from the speakers. • SSM (Strong-station Sequential Memory) automatic preset does not work. • Static noi ...

  • JVC KD-S7250 - page 22

    22 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: F ront: 45 W per channel Rear : 45 W per channel Continuous Power Output (RMS): F ront: 17 W per channel into 4 Ω , 40 to 20 000 Hz at no more than 0.8% total harmonic distor tion. Rear : 17 W per channel into 4 Ω , 40 to 20 000 Hz at no more than 0.8% total harmonic disto ...

  • JVC KD-S7250 - page 23

    1001KKSFLEJEIN EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvcser vice .com W e can help y ou! http://www . j v cmobil e. c om Visit us on -line for T ec hnical Suppor t & C usto mer Satisfa ...

Fabbricante JVC Categoria CD Player

I documenti che otteniamo dal fabbricante del dispositivoJVC KD-S7250 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici JVC
- manuali per l’uso KD-S7250
- schede prodotto JVC
- opuscoli
- o etichette energetiche JVC KD-S7250
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso JVC KD-S7250.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione JVC KD-S7250, manuali di manutenzione, brevi manuali o manuali utente JVC KD-S7250. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto JVC KD-S7250.

Manuali per l’uso simili

Manuale completo del dispositivo JVC KD-S7250, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare JVC KD-S7250 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti JVC KD-S7250.

Il manuale per l’uso completo JVC, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale JVC KD-S7250 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice JVC KD-S7250, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per JVC KD-S7250 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo JVC KD-S7250 - che ci dovrebbe aiutare nei primi passi durante l'uso JVC KD-S7250
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del JVC KD-S7250
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio JVC KD-S7250 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su JVC KD-S7250?

Utilizza il modulo sottostante

Se non hai risolto il problema con JVC KD-S7250 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con JVC KD-S7250 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)