Manuale per l’uso Onkyo CR-N1

64 pagine 2.5 mb
Scarica

Vai alla pagina of 64

Summary
  • Onkyo CR-N1 - page 1

    CD RECEIVER CR-N1 Instruction Manual Thank you for purchasing the ONKYO CR-N1 CD Receiver . Please read this manual thoroughly before mak- ing any connection or turning on the power . Follow these instructions to obtain optimum per- formance and maximum listening enjoyment from your new CR-N1. Please retain this manual for future reference. English ...

  • Onkyo CR-N1 - page 2

    2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is inten ...

  • Onkyo CR-N1 - page 3

    3 14. Outdoor Antenna Grounding – If an out- side antenna or cable system is connected to the appliance, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper groundin ...

  • Onkyo CR-N1 - page 4

    4 Pr ecautions 1. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permis- sion of the copyright holder . 2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onkyo authorized service station. 3. Care From time to time you should wi ...

  • Onkyo CR-N1 - page 5

    5 DANGER: INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCK F AILED OR DEFEA TED. A VOID DIRECT EXPOSURE TO BEAM. CAUTION: THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFOR- MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE. For U.S. model The laser is covered by a housing whi ...

  • Onkyo CR-N1 - page 6

    6 Declaration of Conformity We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY GERMERING, GERMANY ONKYO EUROPE ELECTRONICS GmbH I. MORI declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 a ...

  • Onkyo CR-N1 - page 7

    7 Features • 2 x 10 watts per channel into 4 ohms (DIN) • USB input • USB input/source mixing • Acoustic Presence • Energy Save • RDS (Radio Data System) (European model only) • Timer play (Weekday , Weekend) and Sleep • Auto scan FM tuning • 30 radio presets • Preset station naming • FM tuning indicator • Audio muting (from ...

  • Onkyo CR-N1 - page 8

    8 Remote controller basics Installing the batteries 1. Open the battery compartment, as shown. 2. Insert the batteries (AA, R6, UM-3) as shown, observing the correct polarity (positive + and negative - ). 3. Close the battery compartment, as shown. Always replace both batteries at the same time. Never mix new and old batteries or batteries of a dif ...

  • Onkyo CR-N1 - page 9

    9 Precautions for handling compact discs Playable discs This unit can play back the following discs. Y ou cannot play back discs other than those listed above. Do not play CD-ROMs intened for computer use or non-audio compact discs. Doing so may cause high-pitched noises or other unpredictable results that may damage speakers, amplifiers, and othe ...

  • Onkyo CR-N1 - page 10

    10 Contents Before Using ................................................................................................... 2 Important Safeguards ......................................................................................................... 2 Precautions .................................................................................. ...

  • Onkyo CR-N1 - page 11

    11 Contents Playing CDs ................................................................................................... 35 Loading discs.................................................................................................................... 35 Starting playback......................................................................... ...

  • Onkyo CR-N1 - page 12

    12 Contr ols & connectors Front panel A P Q R S T U V W X O N M L K J B C D E F G H I ...

  • Onkyo CR-N1 - page 13

    13 Controls & connectors A CD compartment [35] CDs are loaded here. B USB indicator [53, 56] This indicator lights up when the CR-N1 is successfully recognized by the PC or Mac connected to the USB port. C ACOUSTIC PRESENCE indicator [34] This indicator lights up when the Acous- tic Presence function is set to either A. PR 1 or A. PR 2. D ENERG ...

  • Onkyo CR-N1 - page 14

    14 Controls & connectors A TIMER indicator B CD indicator C MEMOR Y indicator D Play/Pause indicators E TRACK indicator F AUTO indicator G MONO indicator H AM/PM indicators I RDS indicator (European model) J Single track remaining time indicator K T otal disc remaining time indicator L T uning indicator M STEREO indicator N W .DA Y indicator O ...

  • Onkyo CR-N1 - page 15

    15 Controls & connectors A UP USB port [28] B LINE IN/OUT connectors [26] C SUBWOOFER PRE OUT connector [27] D PHONES jack [28] E OPTICAL DIGIT AL OUTPUT connector [27] F Power cord [29] G FM 75 Ω antenna connector [24] H AM antenna terminals [23] I SPEAKERS terminals [18] Rear panel 8 9 7 6 1 2 3 4 5 Replace the cover when nothing is connect ...

  • Onkyo CR-N1 - page 16

    16 Controls & connectors A ST ANDYBY/ON button [30] This button is used to turn on the CR-N1 and select Standby mode. B SETTING buttons [31, 47–49] These buttons are used in conjunction with the timer functions C TIMER button [31, 47–49] This button is used to select the various T imer functions. D CD, LINE, FM, AM, USB INPUT SELECTOR butto ...

  • Onkyo CR-N1 - page 17

    17 Controls & connectors N MUTING button [34] This button is used to temporarily mute the sound output. O Stop button [36] This button is used to stop CD playback. P PLA Y button [35] This button is used to start CD playback. Q Pause button [36] This button is used to pause CD playback. R Previous/Next buttons [36, 39] The Previous button is us ...

  • Onkyo CR-N1 - page 18

    18 Getting connected • Connect speakers only as shown here. Incorrect connections may damage the CR-N1 and the speakers. • The minimum impedance for each speaker is 4 ohms. • Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided. • Do not connect more than one speaker to each pair of terminals. ? ...

  • Onkyo CR-N1 - page 19

    19 Getting connected Incorrect speaker wiring Never connect speakers as shown below , as this will damage the CR-N1 or the speakers. Attaching the wir es 1. Push up the lever to open the terminal. 2. Insert the bare wires into the terminal. 3. Push down the lever to close the terminal. Make sure that the terminals are gripping the bare wires, not t ...

  • Onkyo CR-N1 - page 20

    20 Getting connected Note that the D-N1 speakers are not supplied with all models. Location precautions • The speaker cabinets are made from wood, making them sensitive to extreme temperatures and humidity . • Do not put the speakers in locations sub- ject to direct sunlight or in humid places, such as near an air conditioner , bathroom, or kit ...

  • Onkyo CR-N1 - page 21

    21 Getting connected Connecting • Connect the speakers only as shown here. Incorrect connections may damage the CR-N1 or the speakers. • Use the supplied speaker cables. Unneces- sarily long, or very thin speaker cables may affect the sound quality and should be avoided. • T urn off the CR-N1 before connecting any speakers. Failure to do so m ...

  • Onkyo CR-N1 - page 22

    22 Getting connected Removing the speaker grilles The D-N1 speakers can be used either with or without the grilles, which can be removed and replaced as follows. 1. Hold the grille at the top using both hands and pull it gently away from the speaker to release the top two fasteners. 2. Hold the grille at the bottom using both hands and pull it gent ...

  • Onkyo CR-N1 - page 23

    23 Getting connected The bundled AM loop antenna is designed for indoor use only . Using the bundled AM loop antenna 1. Assemble the AM antenna, as shown. The AM antenna needs to be connected to the AM terminals located on the rear of the CR-N1, as shown. 2. T o connect an antenna wire, push the terminal lever , insert the bare wir es, and then rel ...

  • Onkyo CR-N1 - page 24

    24 Getting connected The bundled indoor FM antenna is designed for indoor use only . Using the bundled FM antenna 1. Attach the FM antenna, as shown. Once the CR-N1 is ready for use, you ’ ll need to tune into an FM radio station and adjust the position of the FM antenna in order to achieve the best possible recep- tion. 2. Use thumbtacks (drawin ...

  • Onkyo CR-N1 - page 25

    25 Getting connected (The 75/300 ohm antenna adapter is not included with the U.S., Canadian, and Euro- pean models.) The 75/300 ohm antenna adapter can be used to connect an FM antenna with 300 ohm fl at twin-core cable, or to connect an FM antenna with a 75 ohm coaxial cable with no connector attached. Connecting 300 ohm flat twin-cor e cable 1 ...

  • Onkyo CR-N1 - page 26

    26 Getting connected • Do not connect the AC power cord to a wall outlet until you ’ ve completed all other con- nections, including speakers (see page 18) and antenna (see page 23). • For audio connections, the red connector (marked “ R ” ) corresponds to the right channel, and the white connector (marked “ L ” ), to the left channel ...

  • Onkyo CR-N1 - page 27

    27 Getting connected A digital recorder such as an MD, DA T , or CDR can be connected to the CR-N1 ’ s OPTICAL DIGI- T AL OUTPUT for digital recording. Only CD playback signals are output via the OPTICAL DIGI- T AL OUTPUT . A powered subwoofer can be connected to the CR-N1 ’ s SUBWOOFER PRE OUT phono jack for enhanced bass performance. Connecti ...

  • Onkyo CR-N1 - page 28

    28 Getting connected By connecting a computer to the CR-N1 ’ s UP USB port, audio from the computer can be lis- tened to with high quality . Before connecting your computer , see “ Windows USB setup ” on page 52 or “ Macintosh USB setup ” on page 56. Stereo headphones can be connected to the CR-N1 ’ s rear-panel headphone mini-jack for ...

  • Onkyo CR-N1 - page 29

    29 Getting connected Once you ’ ve completed all the other connections, it ’ s time to connect the power cord. 1. Connect the AC power cord to a suitable wall outlet. The CR-N1 switches to Standby mode and “ --:-- ” appears on the display . Once the clock has been set (see page 31), the day and time are displayed in Standby mode. If you do ...

  • Onkyo CR-N1 - page 30

    30 Basic operation 1 Press the ST ANDBY/ON ( ) button on the CR-N1 or remote contr oller . The display lights up and the CR-N1 is ready for use. Press the ST ANDBY/ON ( ) button again to enter Standby mode. Note: If you turn the CR-N1 on or off, or connect or disconnect the USB cable while your computer is outputting sound (e.g., playing back audio ...

  • Onkyo CR-N1 - page 31

    31 Basic operation The remote controller is used to set the clock. Setting the day & time 1 Press the TIMER button r epeatedly until “ ADJUST ” appears on the display , and then press the ENTER button. The day of the week fl ashes on the dis- play . 2 Use the SETTING ( / ) buttons, or the numeric keypad to select the day of the week, and t ...

  • Onkyo CR-N1 - page 32

    32 Basic operation Selecting 12 or 24 hour display The CR-N1 can display time in the 12- or 24-hour format. 1 Press the TIMER button r epeatedly until “ 24H/12H ” appears on the display , and then press the ENTER button. The current setting ( “ 24H ” or “ 12H ” ) fl ashes on the display . 2 Use the SETTING ( / ) buttons to select eithe ...

  • Onkyo CR-N1 - page 33

    33 Basic operation The following input sources can be selected: 1 Press the INPUT button on the CR-N1 repeatedly , or use the CD, LINE, FM, AM, or USB INPUT SELECTOR buttons on the remote contr oller to select the requir ed input source. The name of the selected source appears on the display . The CD indicator appears when CD is selected. The volum ...

  • Onkyo CR-N1 - page 34

    34 Basic operation Sound output can be muted temporarily by using the Muting function. 1 Press the MUTING button on the r emote controller (the output is muted and the MUTING indicator fl ashes). 2 T o unmute the output, press the MUT - ING button again (sound output is restor ed and the MUTING indicator stops fl ashing). Alternatively , the outp ...

  • Onkyo CR-N1 - page 35

    35 Playing CDs The CR-N1 features a vertical disc loading compartment. 1 T o open the disc compartment, press the OPEN/CLOSE ( ) button on the CR-N1 (the door slides open). 2 Mount the CD onto the spindle with the labelled side facing forwards as shown. Make sure that the disc is mounted securely . Do not touch the pickup lens. Doing so may cause a ...

  • Onkyo CR-N1 - page 36

    36 Playing CDs 1 T o pause CD playback, press the PLA Y/P AUSE ( ) button on the CR-N1, or the P AUSE ( ) button on the remote contr oller (the pause indicator appears). 2 T o resume CD playback, press the PLA Y/P AUSE ( ) button on the CR-N1, or the P AUSE ( ) or PLA Y ( ) button on the remote contr oller (the pause indicator disappears). 1 T o st ...

  • Onkyo CR-N1 - page 37

    37 Playing CDs 3 T racks can also be selected by using the numeric keypad. Use buttons 1 to 9 to select tracks 1 to 9. Use button 10/0 to select track 10. T o select track 11 and upwards, press the --/--- button followed by the correspond- ing two number buttons. Examples: T o select track 5: press T o select track 10: press T o select track 15: pr ...

  • Onkyo CR-N1 - page 38

    38 Playing CDs CD tracks are normally played in sequential order . With Random Playback, tracks are played in a random order . 1 T o start Random Playback, press the RANDOM button on the remote contr ol- ler (the RANDOM indicator appears and playback starts after a few seconds). 2 T o select another track randomly , press the Next ( ) button. When ...

  • Onkyo CR-N1 - page 39

    39 Playing CDs CD tracks are normally played in sequential order . With Memory Playback, you can choose the playback order of up to 20 tracks. 1 With playback stopped, press the MEM- OR Y button on the CR-N1 or remote con- troller (the MEMOR Y indicator appears). Note that tracks can be memorized using the numeric keypad during playback, in which c ...

  • Onkyo CR-N1 - page 40

    40 Playing CDs 5 Once you ’ ve memorized all your tracks and are r eady to start playback, press the PLA Y/P AUSE ( ) button on the CR-N1, or the PLA Y ( ) button on the remote contr oller . T racks are played in the order memorized, and playback stops when the last memo- rized track has been played. 6 T o stop Memory Playback, press the STOP ( ) ...

  • Onkyo CR-N1 - page 41

    41 Listening to the radio Y ou must connect the antenna in order to use the radio. See “ Connecting an AM antenna ” on page 23 and “ Connecting an FM antenna ” on page 24 for information. 1 T o select either FM or AM, press the INPUT button on the CR-N1 repeatedly until “ FM ” or “ AM ” appears on the dis- play , or press the FM or ...

  • Onkyo CR-N1 - page 42

    42 Listening to the radio The FM Auto function searches for all receiv- able FM stations and assigns them to presets automatically . Note that previously stored presets will be overwritten by this function. 1 Select FM by pressing the INPUT button on the CR-N1 repeatedly until “ FM ” appears on the display , or press the FM button on the remote ...

  • Onkyo CR-N1 - page 43

    43 Listening to the radio 3 While “– –” is fl ashing, use the T uning ( / ) buttons to select a preset fr om 1 through 30. When you select a preset that already contains a station, the preset number fl ashes quickly . Y ou can overwrite such presets by continuing with this procedure. Alternatively , select an available preset. 4 While the ...

  • Onkyo CR-N1 - page 44

    44 Listening to the radio Presets can be named using up to eight char- acters as follows. 1 Select the preset that you want to name. See “ Selecting preset stations ” on page 43 for more information. 2 Press and hold the DISPLA Y button until the fl ashing cursor appears “–” . 3 Use the T uning ( / ) but- tons to select characters. The f ...

  • Onkyo CR-N1 - page 45

    45 Listening to the radio Y ou can edit preset names as follows. 1 Select the preset whose name you want to edit. See “ Selecting preset stations ” on page 43 for more information. 2 Press and hold the DISPLA Y button until the fi rst character of the name starts fl ashing. 3 T o delete the entire name, press and hold the MEMOR Y button and t ...

  • Onkyo CR-N1 - page 46

    46 Listening to the radio There are two FM radio modes: Auto and Mono. In Auto mode, the CR-N1 automati- cally switches to Stereo mode if the signal strength of tuned FM station is strong enough. In this case, the STEREO indicator appears. If the signal is not strong enough, stereo reception may be noisy and the STE- REO indicator may fl ash. In t ...

  • Onkyo CR-N1 - page 47

    47 Using the timer (r emote contr oller only) The timer can be used to automatically turn on and off the CD player or radio at a speci- fi ed time. Y ou can set independent on and off times for weekdays and weekends, con- fi gure which days are weekdays and which are weekend days, and turn each timer on or off independently . The sleep timer can ...

  • Onkyo CR-N1 - page 48

    48 Using the timer (remote controller only) 5 If you selected the FM or AM source, use the SETTING ( / ) buttons to select a preset station. 6 Press the ST ANDBY/ON button to enter Standby mode. At the speci fi ed ON time, the CR-N1 will automatically turn on and play the speci- fi ed source. Make sure that the volume is set at an appropriate lev ...

  • Onkyo CR-N1 - page 49

    49 Using the timer (remote controller only) Y ou can con fi gure days as weekdays, week- end days, or both. Con fi guring days as both allows you to turn the CR-N1 on and off twice on such days. Initially , Monday through Friday are con fi g- ured as weekdays, and Saturday and Sunday , as weekend days, as shown. 1 Press the TIMER button r epeate ...

  • Onkyo CR-N1 - page 50

    50 Using the timer (remote controller only) The sleep timer automatically turns off the CR-N1 after a speci fi ed amount of time. 1 T urn on the CR-N1 and play a CD, radio station, or other source. 2 Press the SLEEP button r epeatedly to set the requir ed sleep time (the SLEEP indi- cator appears). The sleep time can be set from 10 to 90 minutes i ...

  • Onkyo CR-N1 - page 51

    51 Using USB By connecting the USB port on your com- puter to the USB port on the CR-N1, you can listen to music and other sounds from your computer with high quality . Before connect- ing your computer to the USB port, see “ Windows USB setup ” on page 52 or “ Mac- intosh USB setup ” on page 56. Note: If you turn the CR-N1 on or off, or co ...

  • Onkyo CR-N1 - page 52

    52 Using USB 4 T o tur n off the USB Mix function, pr ess the USB MIX button again (the USB MIX ON indicator goes out and the SOURCE DIRECT indicator lights up). The USB Mix can be heard through the speakers and headphones, but only the selected source signal is output from the LINE OUT . The CR-N1 USB interface supports “ hot plug- ging, ” so ...

  • Onkyo CR-N1 - page 53

    53 Using USB Connecting the CR-N1 (driver installation) 1 T urn on your PC and wait until the Win- dows startup is complete. 2 Connect the USB cable from the CR-N1 to a USB port on your PC. The CR-N1 ’ s USB indicator lights up. If the USB indicator does not light, make sure that the USB cable is connected correctly between the CR-N1 and PC. Note ...

  • Onkyo CR-N1 - page 54

    54 Using USB Checking audio output & volume control operation For correct operation, check the Windows audio output and volume control settings as follows. 1 Open the Multimedia control panel. The Multimedia Properties control panel opens. 2 On the Audio panel, make sure that the “ Preferr ed device ” for Playback is set to USB Audio Device ...

  • Onkyo CR-N1 - page 55

    55 Using USB Enabling digital CD audio In order to listen to CDs in your computer ’ s CD-ROM drive via USB, you must enable digi- tal CD audio for your CD-ROM drive as fol- lows. Windows 98/98SE 1 Open the Multimedia control panel and click the CD Music tab. 2 Select the “ Default CD-ROM drive for playing CD music. ” 3 T urn on “ Enable dig ...

  • Onkyo CR-N1 - page 56

    56 Using USB The CR-N1 USB interface supports “ hot plug- ging, ” so USB cables can be connected or dis- connected even while your Macintosh is on. However , it ’ s recommended that you turn down the CR-N1 volume beforehand. Use only standard USB cables that support high-speed transmission. Operation cannot be guaranteed when using USB ports ...

  • Onkyo CR-N1 - page 57

    57 Using USB Sound control panel con fi rmation In order to output audio from your Macin- tosh via USB, you must set the audio output as follows. 1 Open the Sound control panel. 2 Select Output, and make sure that “ Choose a device for sound output: ” is set to Built-in, as shown. Mac OS 9.0.4 Mac OS 9.1 3 Play an AIFF fi le or something in o ...

  • Onkyo CR-N1 - page 58

    58 T r oubleshooting If you are having trouble operating your CR-N1, look up the symptoms in the following table and then try the suggested remedy . If you cannot resolve the issue yourself, contact your near- est Onkyo dealer . Symptom Possible cause Remedy Cannot turn on the CR-N1. The AC power cord is not fully inserted into the wall outlet? Che ...

  • Onkyo CR-N1 - page 59

    59 T roubleshooting Severe electrical interference may render the CR-N1 ’ s microcomputer temporarily inoperable. In this case you should unplug the CR-N1 for at least fi ve seconds, and then reconnect it. FM reception is hindered by hiss and the tuning and stereo indicators are fl ashing. The received signal is too weak? Install an outdoor FM ...

  • Onkyo CR-N1 - page 60

    60 Speci fi cations Ampli fi er CD Player USB Power output (U.S. & Canadian models) 2 x 6.5 watts min., RMS at 8 ohms, 50 Hz – 20 kHz, with no more than 0.6% total harmonic distortion (FTC) 2 x 9.5 watts min., RMS at 4 ohms, 50 Hz – 20 kHz, with no more than 0.8% total harmonic distortion (FTC) 2 x 15 watts at 4 ohms (EIAJ) Power output ( ...

  • Onkyo CR-N1 - page 61

    61 Specifications T uner General Speci fi cations and features are subject to change without notice. Power supply and voltage speci fi cations depend on where the unit is purchased. T uning range FM 87.9 – 107.9 MHz (200 kHz steps) (U.S. & Canadian model) 87.5 – 108.00 MHz (50 kHz steps) (Other area models) AM 530 – 1710 kHz (10 kHz st ...

  • Onkyo CR-N1 - page 62

    62 MEMO ...

  • Onkyo CR-N1 - page 63

    63 MEMO ...

  • Onkyo CR-N1 - page 64

    64 Specifications E http://www.onkyo.co.jp/ HOMEP AGE SN 29343196B I0110-3 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://ww ...

Fabbricante Onkyo Categoria CD Player

I documenti che otteniamo dal fabbricante del dispositivoOnkyo CR-N1 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Onkyo
- manuali per l’uso CR-N1
- schede prodotto Onkyo
- opuscoli
- o etichette energetiche Onkyo CR-N1
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Onkyo CR-N1.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Onkyo CR-N1, manuali di manutenzione, brevi manuali o manuali utente Onkyo CR-N1. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Onkyo CR-N1.

Manuali per l’uso simili

Manuale completo del dispositivo Onkyo CR-N1, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Onkyo CR-N1 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Onkyo CR-N1.

Il manuale per l’uso completo Onkyo, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Onkyo CR-N1 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Onkyo CR-N1, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Onkyo CR-N1 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Onkyo CR-N1 - che ci dovrebbe aiutare nei primi passi durante l'uso Onkyo CR-N1
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Onkyo CR-N1
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Onkyo CR-N1 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Onkyo CR-N1?

Utilizza il modulo sottostante

Se non hai risolto il problema con Onkyo CR-N1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Onkyo CR-N1 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)