-
Kenmore 625.348420 - page 1
PRINTED IN U.S.A. SA VE THIS MANUAL Use plastic bag and tie provided, to hang manuals nearby the softener for future reference. Demand Special Edition W ater Softener ◆ W arranty ◆ Start Up / Setting T imer ◆ How It Works ◆ Care Of ◆ Specifications ◆ Repair Parts ? ...
-
Kenmore 625.348420 - page 2
W ARRANTY 2 SEARS RESIDENTIAL W A TER SOFTENER FULL ONE YEAR W ARRANTY ON W A TER SOFTENER For one year from the date of purchase, when this water softener is installed and maintained in accordance with our instructions, Sears will repair , free of charge, defects in material or work- manship in this water softener . FULL TEN YEAR W ARRANTY AGAINST ...
-
Kenmore 625.348420 - page 3
T ABLE OF CONTENTS 3 P AGE NO. SECTION 1 SOFTENER ST ART UP A. SAFETY GUIDES 4 B. CHECK LIST OF STEP-BY -STEP GUIDES T O INST ALL 5 C. PROGRAM THE TIMER 6-7 D. SANITIZING THE W A TER SOFTENER 8 E. FILL THE STORAGE T ANK WITH SAL T 9 SECTION 2 HOW YOUR W A TER SOFTENER WORKS A. F ACE PLA TE TIMER FEA TURES 10 B. SOFT W A TER SERVICE AND REGENERA TIO ...
-
Kenmore 625.348420 - page 4
W A TER SOFTENER ST ART -UP SECTION 1 4 1A. SAFETY GUIDES ▲ Read all steps, guides and rules carefully be- fore installing and using your new water softener . Follow all steps exactly to correctly install. Fail- ure to follow them could cause personal injury or property damage. Reading this book will also help you to get all of the benefits from ...
-
Kenmore 625.348420 - page 5
W A TER SOFTENER ST ART -UP SECTION 1 5 1B. CHECK LIST OF ALL STEP-BY -STEP GUIDES TO INST ALL Refer to the Installation Manual, part no. 7159931, for stepĆbyĆstep guides. T o be sure you have done all the steps to install the softener , read the following list. Page numbers referred to are in the ...
-
Kenmore 625.348420 - page 6
W A TER SOFTENER ST ART -UP SECTION 1 6 1C. PROGRAM THE TIMER FIG. 1 DOWN button UP button display SELECT button ON/OFF–HOLD button (Recharge T onight–Now) SELECT ON/OFF- HOLD RECHARGE TONIGHT RECHARGE NOW Demand W ater Softener Sears Water Line for Customer Assistance 1–800–426–9345 Kenmore When the transformer is plugged in, the model c ...
-
Kenmore 625.348420 - page 7
W A TER SOFTENER ST ART -UP SECTION 1 7 1C. PROGRAM THE TIMER 2. SET W A TER HARDNESS NUMBER: ■ Press the SELECT button once to display 15 (flashing) and HARDNESS. The grains per gallon (gpg) hardĆ ness of your water supply is on your water analysis report. Be sure to enter water test results on page 2, for future refer ence. NOTE: If your water ...
-
Kenmore 625.348420 - page 8
W A TER SOFTENER ST ART -UP SECTION 1 8 1D. SANITIZING THE W A TER SOFTENER Care is taken at the factory to keep your water softener clean and sanitary. Materials used to make the softener will not infect or contaminate your water supply, and will not cause bacteria to for m or grow. However , during shipping, storage, installing and operating, bac ...
-
Kenmore 625.348420 - page 9
W A TER SOFTENER ST ART -UP SECTION 1 9 1E. FILL THE STORAGE T ANK WITH SAL T Brine (salt dissolved in water) is needed for each and every regeneration. The water for making brine is metered into the salt storage tank by the softener . However , you must keep the tank filled with salt. Fill the tank with NUGGET or PELLET water softener salt. DO NOT ...
-
Kenmore 625.348420 - page 10
HOW YOUR W A TER SOFTENER WORKS SECTION 2 10 2A. F ACE PLA TE TIMER FEA TURES EXTRA RECHARGE Sometimes, a manually started regeneration (reĆ charge) may be desired, or needed. Two examples are: -- Y ou have used more water than usual (guests visiting) and you may run out of soft water before the next timer started regeneration. -- Y ou did not ref ...
-
Kenmore 625.348420 - page 11
HOW YOUR W A TER SOFTENER WORKS SECTION 2 11 2B. SOFT W A TER SERVICE AND REGENERA TION SERVICE When the softener is giving you soft water , it is called Service". During service, hard water flows through the house main water pipe and into the softener . Inside of the softener resin tank is a bed made up of thousands of tiny, plastic resin ...
-
Kenmore 625.348420 - page 12
HOW YOUR W A TER SOFTENER WORKS SECTION 2 12 2B. SOFT W A TER SERVICE AND REGENERA TION BRINING: During brining, the brine is moved from the salt storage area, into the resin tank. Inside the resin tank, brine cleans hardness minerals from the resin beads and they are discharged out the drain. How much brine is needed to clean the resin depends ...
-
Kenmore 625.348420 - page 13
HOW YOUR W A TER SOFTENER WORKS SECTION 2 13 2B. SOFT W A TER SERVICE AND REGENERA TION AUTOMA TIC BYP ASS During the brining, brine rinse and backwash cycles of regeneration, water goes through the softener valve and to the house pipes. If a faucet is opened, hard water is there for your needs. However , you should not use HOT water ...
-
Kenmore 625.348420 - page 14
CARE OF YOUR SOFTENER SECTION 3 14 3A. SAL T … REFILLING STORAGE T ANK/BREAKING A SAL T BRIDGE WHEN TO REFILL WITH SALT: Check the salt level a few weeks after you install the softener and every week after that. Refill when the storage tank is about 1/3 full. Never let the softener use all the salt before refilling. Without salt, you will soon ha ...
-
Kenmore 625.348420 - page 15
CARE OF YOUR SOFTENER SECTION 3 15 3B. KEEPING THE W A TER SOFTENER CLEAN COVERS T o keep your new Sears water softener looking nice, apply a coat of paste wax and repeat once a year . When dusty, wipe it with a damp cloth to keep it sparkling. NOTE: Never use cleaners having ammonia or abrasives. They may scratch and dull the surface. NOZZLE AND V ...
-
Kenmore 625.348420 - page 16
CARE OF YOUR SOFTENER SECTION 3 16 3C. KEEP THE SOFTENER FROM FREEZING If the softener is installed where it could freeze (summer cabin, lake home, etc.), you must drain all water from it to stop possible freeze damage. T o drain the softener: 1 . Close the shutĆoff valve on the house main water pipe, near the water meter or pressure tank. 2 . Ope ...
-
Kenmore 625.348420 - page 17
CARE OF YOUR SOFTENER SECTION 3 17 3D. HELPFUL HINTS CHECKLIST ... TO HELP YOU SA VE MONEY If your water softener fails to work, make the following easy checks. Often, you will find what's wrong yourself and you won't have to call and wait for service. If, after making the checks, your softener still does not work right, call your Sears S ...
-
Kenmore 625.348420 - page 18
OTHER THINGS TO KNOW SECTION 4 18 4A. DIMENSIONS/SPECIFICA TIONS FIG. 12 BYP ASS V AL VES A B C D E F INCHES CM A Salt T ank Height 40-1/4 102.2 B Resin T ank Diameter (nominal) 8 20.3 C Resin T ank Height (nominal) 40 101.6 D Inlet-Outlet Height 41-1/2 105.4 E Overall Height 46 1 16.8 F 1 Length 19-1/2 49.5 F 2 Width 16-1/2 41.9 — Distance betwe ...
-
Kenmore 625.348420 - page 19
SERVICE TECH. INFORMA TION SECTION 5 19 5A. TROUBLESHOOTING Keep this manual with your water softener . If repairs are needed, the service technician must have the information on the following pages. For telephone assistance, call toll free, 1-800-426-9345. SELECT ON/OFF HOLD RECHARGE TONIGHT RECHARGE NOW DOWN button UP button display SELECT button ...
-
Kenmore 625.348420 - page 20
SERVICE TECH. INFORMA TION SECTION 5 20 5A. TROUBLESHOOTING AUTOMA TIC ELECTRONIC DIAGNOSTICS The face plate computer has a selfĆdiagnostic function for the electrical system (except input power and water meter). The computer monitors the electronic components and circuits for correct operation. If a malfuncĆ tion occurs, an error code appears in ...
-
Kenmore 625.348420 - page 21
SERVICE TECH. INFORMA TION SECTION 5 21 5A. TROUBLESHOOTING CORRECT SWITCH DISPLA YS V AL VE CYCLE ST A TUS – – V alve in service, fill, brining, back- wash or fast rinse position – P V alve rotating from one position to another C. While in this diagnostic screen, the following inĆ formation is available and may be beneficial for various rea ...
-
Kenmore 625.348420 - page 22
SERVICE TECH. INFORMA TION SECTION 5 22 5A. TROUBLESHOOTING MANUAL ADV ANCE REGENERA TION CHECK This check verifies proper operation of the valve motor , brine tank fill, brine draw, regeneration flow rates, and other controller functions. Always make the initial checks, and the manual initiated diagnostics. NOTE: The face plate display must show a ...
-
Kenmore 625.348420 - page 23
SERVICE TECH. INFORMA TION SECTION 5 23 5B. ROT AR Y V AL VE SERVICE Before working on the valve, tur n of f the water supply and disconnect from electrical power . TO RELIEVE PRESSURE: Close the inlet valve and open a soft water faucet. Then close the outlet valve and open the bypass valve. ? ...
-
Kenmore 625.348420 - page 24
SERVICE TECH. INFORMA TION SECTION 5 24 5C. W A TER FLOW THROUGH THE SOFTENER V AL VE SERVICE CYCLE ? ...
-
Kenmore 625.348420 - page 25
SERVICE TECH. INFORMA TION SECTION 5 25 5C. W A TER FLOW THROUGH THE SOFTENER V AL VE BRINING AND BRINE RINSE CYCLES After fill, timer/switch action allows the motor to turn the rotor and disc into BRINING position. W ater flow is directed to the nozzle. Suction, created by the nozzle and venturi, draws brine from the salt storage tank and injects ...
-
Kenmore 625.348420 - page 26
SERVICE TECH. INFORMA TION SECTION 5 26 5C. W A TER FLOW THROUGH THE SOFTENER V AL VE F AST RINSE CYCLE " " ? ...
-
Kenmore 625.348420 - page 27
SERVICE TECH. INFORMA TION SECTION 5 27 NOTES ...
-
Kenmore 625.348420 - page 28
REP AIR P ARTS SECTION 6 28 SEARS W A TER SOFTENER MODEL NO. 625.348420 KEY NO. P ART NUMBER DESCRIPTION 1 7137604 Cover (main) 2 7137612 Salt Hole Cover 3 71 18333 Wire Harness (switch) 4 7132840 Power Cord (transformer) 5 7144960 T imer Repl. (PW A) 6 7137620 7194101 Face Plate (order req’d decal) Face Plate Decal 7 7137599 Rim 8 7137727 Brinew ...
-
Kenmore 625.348420 - page 29
REP AIR P ARTS SECTION 6 29 1 2 48 49 SEARS W A TER SOFTENER MODEL NO. 625.348420 KEY NO. P ART NUMBER DESCRIPTION 30 7168647 Ceramic Weight 31 0513860 Float Stop 32 7097202 Float (Includes Key No. 33) 33 0516947 Float Seal 34 7093216 Float Rod & Stem 35 7092278 Guide Cap 36 7170288 O-Ring 15/16 x 1-3/16 37 051621 1 Seal 38 0516924 Retainer , B ...
-
Kenmore 625.348420 - page 30
REP AIR P ARTS SECTION 6 30 SEARS W A TER SOFTENER MODEL NO. 625.348420 3 V AL VE ASSEMBL Y 77 78 79 80 81 82 83 84 ...
-
Kenmore 625.348420 - page 31
REP AIR P ARTS SECTION 6 31 SEARS W A TER SOFTENER MODEL NO. 625.348420 P ARTS LIST KEY NO. P ART NUMBER DESCRIPTION 50 7131755 Screw , #6-20 x 7/8 (2 req.) 51 7133008 Motor (incl. 2 ea. of Key No. 50) 52 0900857 Screw , #6-20 x 3/8 (2 req.) 53 71 17808 Motor Plate 54 0503288 Bearing 55 71 13927 Cam and Gear 56 7142942 Clip (Drain) 57 0501228 Flow ...
-
Kenmore 625.348420 - page 32
OWNER’S MANUAL MODEL NO. 625.348420 Demand Special Edition W ater Softener The model number of your water softener is found on the rating de- cal. This decal is on the rim, under the salt cover ...
Hai una domanda su Kenmore 625.348420?
Utilizza il modulo sottostante
Se non hai risolto il problema con Kenmore 625.348420 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Kenmore 625.348420 è probabile che voglia condividere il modo di risolverlo.