-
Miele G 2830 SCi - page 1
Operating instructions LaP er la G 2830 SCi T o prevent accidents and machine damage read these instructions before installation or use. UV M.-Nr . 06 696 130 ...
-
Miele G 2830 SCi - page 2
IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Display . . . ...
-
Miele G 2830 SCi - page 3
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Settings J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Miele G 2830 SCi - page 4
W ARNING – When using your dishwasher , f ollow basic precautions, including the follo wing: Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance. Use the dishwasher only for its intended pu ...
-
Miele G 2830 SCi - page 5
Installation The dishwasher must be installed and connected in compliance with the installation instructions. Installation and repair work should be perfor med by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty . Do not install or use a damaged dishwasher . A damaged appliance is dange ...
-
Miele G 2830 SCi - page 6
Use T o reduce the risk of injury , do not allow children to play in, on or near the dishwasher . Only use the dishwasher if all panels are pr operly in place. Do not tamper with the controls. Do not damage, sit or stand on the door or baskets of the dishwasher . Close the door when not in use. Under certain conditions, hydrogen gas may be produced ...
-
Miele G 2830 SCi - page 7
a Upper spray arm (not visible) b Cutlery tray (depending on model) c Upper basket d Middle spray arm e Air inlet for drying (depending on model) f Lower spray arm g Filter combination h Data plate i Child Safety Lock in the door handle (not visible) j Rinse aid reservoir k Dual compartment detergent dispenser l Salt container Guide to the dishwash ...
-
Miele G 2830 SCi - page 8
Control panel a K (Information) touc h control T o display more info about the displayed menu b s (On/Off) touch contr ol T o turn the dishwasher on and off c Selection touch contr ols T o select a menu point displayed next to the touch control. T o change the displayed value (+/-). T o browse between menus. d Display See the following pages for mo ...
-
Miele G 2830 SCi - page 9
Display The following can be selected in the display: – the wash program – the options – the start time – the settings J menu During a running program the display shows: – the program name – the current time of day – the program sequence – the approximate r emaining time – faults and messages A bullet in the display next to the to ...
-
Miele G 2830 SCi - page 10
Energy sa ving washing This dishwasher is exceptionally economical in the use of water and electricity . For best results follow these tips: ^ For lowest energy consumption and the gentlest washing of china and crystal, connect the dishwasher to a cold water source. ^ For fastest possible wash times, yet higher energy consumption, connect the dishw ...
-
Miele G 2830 SCi - page 11
T o open the door ^ Press the r elease catch inside the door grip. If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will restart. T o close the door ^ Push the baskets in. ^ Lift the door and push until it clicks into place. Child Safety Loc k The Child Safety Lock is designed to prevent ...
-
Miele G 2830 SCi - page 12
W elcome screen ^ T ur n the dishwasher on with the sensor s . The Welcome scr een shows when the washer is tur ned on for the first time. Language setting The display changes automatically to the language setting. The selected language is marked with a L check. Sprache F °# eština m ° dansk ° deutsch B OK ° ^ Select the desired language and c ...
-
Miele G 2830 SCi - page 13
After confirming the minutes, a message shows confir ming that the set-up of your machine has been successfully completed. After confirming this message, the two messages Insufficient salt and Insufficient rinse aid may show . Confirm with OK and the display changes to the main menu. Main menu 12:00 ° Normal m ° Pots + Pans ° China + Crystal : T ...
-
Miele G 2830 SCi - page 14
W ater softener Every dishwasher is tested before leaving the factory . Any water remaining in the machine is fr om the final factory test and does not indicate that the machine has been used. T o achieve good cleaning results, the dishwasher needs soft water . Hard water results in calcium deposits on dishware and in the dishwasher . If your tap w ...
-
Miele G 2830 SCi - page 15
Filling the salt container , Inadvertently filling the salt container with dishwashing detergent will damage the water softener . , Only use water softener salt specially formulated for dishwashers. Other salts may contain insoluble additives which can impair the water softener . When opening the salt container , water will run out. Open the contai ...
-
Miele G 2830 SCi - page 16
^ Carefully fill with salt until water runs out. The salt container holds approx. 2.2 lbs (1 kg) of salt. Do not fill with more than 2.2 lb (1 kg) salt. As it is filled, water will run out. ^ Clean any excess salt from the threads of the container opening. Close the lid firmly . ^ If the dishwasher will not be used immediately , run the "Shor ...
-
Miele G 2830 SCi - page 17
Rinse aid Rinse aid helps to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. , Filling the rinse aid reservoir with detergent will damage the reservoir . Only pour rinse aid formulated for residential dishwashers into the reservoir . When using "2 in 1" or ...
-
Miele G 2830 SCi - page 18
^ Pour liquid rinse aid into the reservoir until it its visible on the surface of the screen. The rinse aid reservoir holds appr ox. 3.7 oz (110 ml). ^ Press on the flap until you hear it click shut. Failure to close it all the way allows water to enter the reservoir during the wash pr ogram. ^ Clean any spilled rinse aid. The flap will remain clos ...
-
Miele G 2830 SCi - page 19
, Do not wash items soiled with ash, sand, wax, grease or paint in the dishwasher . Ash and sand do not dissolve and will be distributed throughout the inside of the dishwasher . W ax, grease and paint will cause permanent discoloration and damage to the dishwasher . ^ Scrape food from dishes befor e placing them in the dishwasher , rinsing is not ...
-
Miele G 2830 SCi - page 20
Items not recommended for dishwashing – Cutlery with wooden handles – Wooden cutting boar ds – Glued items such as old knives with handles glued together around the shank of the blade – Handmade craft items, antique, metal trimmed or decorative glassware – Plastic items that are not heat resistant – Copper , brass, tin or aluminum – D ...
-
Miele G 2830 SCi - page 21
Split cutlery tray ^ Arrange the cutlery as shown in the cutlery tray . For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Place knives with the cutting edge and forks with the prongs between the holders. Spoons should be placed in the opposite direction with the handles between the holders. ...
-
Miele G 2830 SCi - page 22
Upper basket , For safety reasons only use the dishwasher with the upper and lower basket inserted. Exception: The programs "Large items normal" and "Large items soiled" are designed for use without the upper basket. ^ Load the upper basket with small, lightweight, or delicate items such as cups, saucers, glasses, dessert bowls ...
-
Miele G 2830 SCi - page 23
Adjustable cup rac ks ^ Raise the rack to make room for tall glasses. Lower it to double stack smaller pieces. The height of the cup rack can be adjusted in two levels. ^ Pull the cup rack upwards and let it engage at the desired height. Coffee bar (depending on model) Glasses can be leaned against the coffee bar for a secur e stand. ^ The bar can ...
-
Miele G 2830 SCi - page 24
Glassware rail (depending on model) The glassware rail is designed for a secure stand of tall glasses and stemmed glassware. ^ Flip the bar down to lean tall glasses on it. ^ If necessary take out par t of the cutlery tray to make room for tall glasses. Multi-function basket The multi-function basket is designed to securely wash baby bottles, sauce ...
-
Miele G 2830 SCi - page 25
T o wash bab y bottles ^ Insert the nipples under the hooks a . ^ Open the flaps b and insert the bottle neck into the opening. ^ Small items like the rings and caps of the bottles can be inserted in the open spaces. Loading the dishwasher 25 ...
-
Miele G 2830 SCi - page 26
Adjusting the upper basket The upper basket can be raised or lowered to accommodate tall items. The basket can also be angled to fit tall items in both, the upper and lower baskets. The angles should not be set to opposite extremes. This will block the middle spray arm. T ake care when sliding the basket in and out in this position. ^ Slide out the ...
-
Miele G 2830 SCi - page 27
Lower basket ^ For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Loading the dishwasher 27 ...
-
Miele G 2830 SCi - page 28
Comfort inserts The comfort inser ts are designed for cups, glasses, plates, bowls, pots, etc. ^ T o insert tall items, raise the cup rest. ^ Lean or hang stemmed glassware such as wine or champagne glasses in the cut outs of the cup rest. PlateGuard Plus with StemGuar d Removing an insert a : ^ T o remove an insert, gently pull up on the handle. I ...
-
Miele G 2830 SCi - page 29
Remov able spike inser t with StemGuard Removing: ^ Push the insert down, a and at the same time push the latch towards the basket, b . V ase/Bottle holder The vase/bottle holder , e.g. for vases and baby bottles, can be inserted into the lower basket as shown in the illustration. If placed anywhere else, water will not reach all surfaces. The bott ...
-
Miele G 2830 SCi - page 30
Detergent , Dishwasher detergents contain irritant and corrosive ingr edients. Avoid inhaling or swallowing dishwasher detergent. Keep children away fr om detergent. Fill the detergent dispenser only when you are r eady to star t the dishwasher . , Only use detergents formulated for domestic dishwashers. Use only the recommended amount of detergent ...
-
Miele G 2830 SCi - page 31
Adding deter gent ^ T o open, press the latch on the detergent dispenser . The flap will spring open. The flap is always open at the end of a program. ^ Add detergent to compartment II and close the flap. ^ If a Pre-rinse is desir ed, and available for your chosen program, add 1 teaspoon (5 ml) of detergent to compartment I. The horizontal marks in ...
-
Miele G 2830 SCi - page 32
T urning on ^ Make sure the spray arms can rotate fr eely . ^ Close the door . ^ Open the water supply , if closed. ^ T ur n the dishwasher on by touching the s control. The main menu shows in the display . If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". Main menu 12:00 ° Normal m ° ...
-
Miele G 2830 SCi - page 33
Program When to use Program sequence Pre- rinse 12 Main wash Interim rinse 12 Final rinse Drying Normal For normally soiled dishware with dried on food XX X X X X Pots + Pans For normally soiled pots and pans with dried on food , and heavily soiled dishwar e, 120% detergent recommended XX X X X China + Crystal For temperature sensitive glassware an ...
-
Miele G 2830 SCi - page 34
Program When to use Program sequence Pre- rinse Main wash Interim rinse 12 Final rinse Drying Starch For dishware with dried on starc hy f ood ; 120% detergent recommended XX X X X Cheese For dishware with dried on cheese ; 120% detergent recommended XX X X X Sani W ash T o sanitize dishware , e.g. baby bottles, cutting boards and preparation dishw ...
-
Miele G 2830 SCi - page 35
Selecting Options Options can be added to the selected program. ^ Select Options . The display shows the available options for the selected program. Available options: Pre-rinse: – For easily removable soiling Soak: – T o soak stubborn soiling. When using powder detergent, fill approx. 1 teaspoon (5 g) of detergent in the detergent compartment ...
-
Miele G 2830 SCi - page 36
Y ou can now select the detergent used. Availabe selections ar e: Powder , Gel, "2 in 1" and "3 in 1" tabs. See "Settings J , Detergent". Starting a program ^ Select Start . The program begins. Cancel a program only in the first 5 minutes. Otherwise important program steps (e.g. the water softening) could be interrupte ...
-
Miele G 2830 SCi - page 37
At the end of a program At the end of a program the display shows Program finished . Dishes tends to chip if removed still hot from the dishwasher . Let the dishware cool. After turning off the dishwasher open the door slightly . The dishes will cool much faster . ^ Open the dishwasher and unload the dishes. ^ T ur n the dishwasher off by touching ...
-
Miele G 2830 SCi - page 38
Changing a program If the detergent flap is already open, do not change the program. If a program has alr eady star ted and you wish to change it: Sensor Wash 12:00 Pre-rinse Time left 1:30 h Cancel ° ^ Select Cancel . ^ Confirm the message Cancel program? with OK . The program is canceled. Sensor Wash 12:00 Program finished Main menu ° ^ Select ...
-
Miele G 2830 SCi - page 39
Delay start The start time of a program can be delayed from 15 minutes to 24 hours in 15-minute-increments. When using the "Delay Start" function, make sure that the detergent compartment is dr y before adding detergent. Wipe dry with a cloth if necessar y . Otherwise the detergent could stick together and not completely rinse out. Liquid ...
-
Miele G 2830 SCi - page 40
Sensor Wash 12:00 Start at 12:00 Cancel ° The program name and the start time are displayed. The program starts automatically at the selected time. Starting a program before the dela y star t has elapsed: A program can be started before the delay start time has elapsed. Proceed as follows: ^ Select Cancel and confirm with OK . ^ Select Main menu . ...
-
Miele G 2830 SCi - page 41
The "Settings J " menu allo ws y ou to adjust standar d settings Open the Settings J menu ^ T ur n the dishwasher on by touching the s control. The main menu shows in the display . If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". In this case, switch to the main menu by touch ...
-
Miele G 2830 SCi - page 42
Language J The display contents can be shown in differ ent languages. The displayed language can be changed by the submenu "Language J ". ^ Select the desired language and confirm with OK . The flag behind the word "Language J " serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag unt ...
-
Miele G 2830 SCi - page 43
Detergent T o achieve the best results the used detergent can be set on your dishwasher . The selection allows "Powder", "Gel", "2 in 1" and "3 in 1" tabs. The program cycle sequence will be adjusted for the selected detergent. Depending on the program the program running time may incr ease. P owder When usin ...
-
Miele G 2830 SCi - page 44
W ater hardness The dishwasher is equipped with a sensor softener , which automatically detects the hardness of your tap water . After plumbing the dishwasher and finishing a program, e.g. "Rinse & Hold", the water hardness is displayed in the menu "W ater hardness". ^ T ouch OK to go back to "Settings J ". Rinse a ...
-
Miele G 2830 SCi - page 45
Reorganize pr ogram list The order of the pr ograms in the program list can be reorganized. Fr equently used programs can be saved to the first three positions. Select program for position 1 12:00 ° Normal B m ° Pots + Pans ° Cancel Continue ° ^ Select the program to be saved to the first pr ogram list position. ^ Confirm with Continue . ^ Repe ...
-
Miele G 2830 SCi - page 46
Save options Additional options can be selected for some programs, e.g. extended drying. See "Use - Selecting options". Save options allows you to save the selected options for future use with this program. The function is turned off by default. ^ Select the desired setting and confirm with OK . Settings J 46 ...
-
Miele G 2830 SCi - page 47
Child Safety Loc k The Child Safety Lock protects the dishwasher fr om misuse. If the dishwasher is turned on while the Child Safety Lock is activated, the display shows The appliance is locked . The lock must be deactivated before the dishwasher can be used. As long as the Child Safety Lock is activated, the dishwasher is locked every time it is t ...
-
Miele G 2830 SCi - page 48
Program loc k The running program can be locked. This function pr events accidentally changing a program during use. Y ou can select if the program lock should be activated or not. The actual locking of the program is done when a pr ogram is started. The function is turned off by default. Program lock 12:00 ° Yes ° No B OK ° ^ Select Yes to acti ...
-
Miele G 2830 SCi - page 49
Locking a pr ogram T o lock a program, a pr ogram must be star ted first. ^ Select a program and begin it with Start . Sensor Wash 12:00 Main wash Time left 1:23 h ° W Cancel ° ^ Select ) . ^ Select On to activate this function and confirm with OK . The program is locked. It stays locked until the lock is deactivated. T o cancel a running program ...
-
Miele G 2830 SCi - page 50
T emperature The temperature can be displayed in °C/Celsius or °F/Fahrenheit. The temperatures ar e shown in °C/Celsius by default. ^ Select the desired temperatur e unit and confirm with OK . Buzzer When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs. The buzzer at the end of a program is turned off by defa ...
-
Miele G 2830 SCi - page 51
Ke ypad tone A tone will sound when a control is touched. The keypad tone is turned on by default. ^ Select the desired option and confirm with OK . Brightness The display brightness can be adjusted in 17 levels. The brightness is set to level 8 by default. ^ Select the desired brightness and confirm with OK . Contrast The display contrast can be a ...
-
Miele G 2830 SCi - page 52
Dealer Demo modes are only for showrooms. The dishwasher has three demo programs for showr ooms. The programs "Demo mode" and "Endless demo mode" show the use and function range of the dishwasher . – Demo mode : The program is started by touching a control. It runs once and must be started again. – Endless demo mode : The pr ...
-
Miele G 2830 SCi - page 53
With the aid of the following guide, minor problems can be fixed without a service call. , Repairs should only be carried out by a qualified and trained person in accordance with local and national safety r egulations. Unauthorized repairs could cause personal injury or machine damage. T echnical faults Issue P ossible fault Solution After the dish ...
-
Miele G 2830 SCi - page 54
Prob lems water intake/drain Issue Possib le fault Solution The buzzer sounds. The display sho ws the follo wing: No water intake Open the water faucet The water supply is closed. Open the water supply all the way . Fault water intake FXX Before fixing the fault: – T ur n the dishwasher off by touching the s control. Fault F12/F13: Fault in the w ...
-
Miele G 2830 SCi - page 55
Issue P ossible fault Solution The program "Ener gy Saver" displa ys the fault: Water intake temp. too low The intake water does not have a minimum temperature of 115°F (45°C). See "Plumbing - Connection to the water supply". – Restart the program. – If the fault is displayed again, use a differ ent program. The buzzer sou ...
-
Miele G 2830 SCi - page 56
General prob lems with the dishwasher Issue P ossible fault Solution The display remains off. The display has gone into "Standby" mode to save energy . T ouch any control. See "Settings J - Standby" for more info. The buzzer sounds during a running program. The display shows the f ollowing: Salt container lid Close the salt cont ...
-
Miele G 2830 SCi - page 57
Issue P ossible fault Solution Detergent is left in the dispenser at the end of a program. The dispenser was damp when detergent was added. Dry the dispenser before adding detergent. The detergent lid cannot be closed pr operly . Detergent residue is blocking the catch. Remove the residue. The door and the interior walls are still wet after a progr ...
-
Miele G 2830 SCi - page 58
Sounds Issue P ossible fault Solution There is a knocking noise in the wash cabinet. The spray arm is hitting an item in the basket. Interrupt the program, rearrange the items blocking the spray arm. There is a rattling noise in the wash cabinet. Items are not secur e in the wash cabinet. Interrupt the program and rearrange loose items. There is a ...
-
Miele G 2830 SCi - page 59
P oor cleaning results Issue P ossible fault Solution The dishes are not clean. The dishes were not loaded correctly . See "Loading the dishwasher". The program was not powerful enough. Select a more intensive program, see "Pr ogram Guide". Stubborn but nor mal soiling (e.g. tea). Use the function "Adjust Sensor W ash" ...
-
Miele G 2830 SCi - page 60
Issue P ossible fault Solution Dishes are not dry , glasses and cutlery are spotted? The rinse aid setting may be too low or the rinse aid reservoir is empty . Increase the dosage, r efill the reservoir or switch the rinse aid product when r efilling, see "Before using for the first time". Dishes were taken out too soon. Leave dishes in l ...
-
Miele G 2830 SCi - page 61
Issue P ossible fault Solution Glasses are discolored and the film cannot be wiped off. Detergent deposits. Use a differ ent detergent. Glasses are dull and discolored and film cannot be wiped off. Glasses are not dishwasher safe. There is no r emedy . Only wash dishwasher safe glasses in the dishwasher . T ea or lipstick stains have not been compl ...
-
Miele G 2830 SCi - page 62
Repairs In the event of a fault which you cannot correct yourself please contact the Miele Service Department at the phone number on the back of this booklet. ^ Please quote the model type and number of your appliance. These can be found on the data plate along the right edge of the door . PC Update The Program Corr ection (PC) allows a technician ...
-
Miele G 2830 SCi - page 63
T o transport the dishwasher , e.g. when moving to a new home, note the following: – Empty the dishwasher . – Secure any loose parts, e.g. hoses, cables, cutlery baskets. – T ranspor t the dishwasher in the upright position. If unavoidable it may be transported on its back. Do not transport it on its side or on the door . Residual water in th ...
-
Miele G 2830 SCi - page 64
64 ...
-
Miele G 2830 SCi - page 65
User Maintenance Instr uctions T o prevent accidents and machine damage, read these instructions before installation or use. ...
-
Miele G 2830 SCi - page 66
Check and clean your dishwasher regularly (appr ox. ever y 4-6 months). This will help avoid problems and faults. , Abrasive cleaning agents, glass cleaning agents, all-purpose cleaners, thinner or ammonium cleaners should not be used on the dishwasher . They will damage the surface. W ash cabinet Generally , the wash cabinet is self cleaning if th ...
-
Miele G 2830 SCi - page 67
T riple filter system The triple filter system in the base of the wash cabinet prevents food fr om being redeposited on dishes. It also pr otects the circulation pump fr om damage caused by foreign objects (e.g. br oken glass, bones, etc.). , The machine must not be used without all the filters in place! Check and clean the filter system every 4-6 ...
-
Miele G 2830 SCi - page 68
T o clean the underside of the filter the flap must be opened. ^ Push the clips together a and open the flap b . ^ Rinse under running water . ^ Close the flap so that the clip engages. ^ Return the filter so it lies flat in the base of the wash cabinet. ^ Lock the filter by turning the handle clockwise. , The triple filter system must be inserted ...
-
Miele G 2830 SCi - page 69
Cleaning the spray arms Sometimes particles of food get stuck in the spray arm jets. The spray ar ms should be inspected and cleaned every 4 - 6 months. ^ T ur n off the dishwasher befor e cleaning. Removing the spra y arms ^ Remove the cutlery tray (if present). ^ Press the top spray arm up to engage the inner ratchet and unscrew the spray arm. ^ ...
-
Miele G 2830 SCi - page 70
Cleaning the water inlet filter A filter is incorporated into the intake hose attached to the dishwasher’ s shut off valve. If your water is har d or the pipes contain sediment, this filter may clog and prevent enough water fr om entering the wash cabinet. , The plastic housing of the water connection contains electrical wiring. Do not submerge t ...
-
Miele G 2830 SCi - page 71
Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ T ur n off the dishwasher and pull the plug. ^ Remove the triple filter (see "T riple filter system"). ^ Use a jug or bowl to scoop water out of the wash cabinet. ^ Tilt the ...
-
Miele G 2830 SCi - page 72
72 ...
-
Miele G 2830 SCi - page 73
Installation Instr uctions For installation of the dishwasher please refer to the Installation Sheet supplied with these instructions. ...
-
Miele G 2830 SCi - page 74
Disposal of the packing material The cardboar d box and packaging protect the appliance during shipping. These materials are biodegradable and recyclable. Please r ecycle. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of childr en. Danger of suffocation! Disposal of an old machine Old appliances may c ...
-
Miele G 2830 SCi - page 75
, Installation, repairs and other work by unqualified persons could be dangerous. The manufactur er cannot be held responsible for unauthorized work. Check that the voltage, frequency and fuse rating shown on the data plate match the household mains supply . The power outlet must be accessible after installation. Do not use an extension cord to con ...
-
Miele G 2830 SCi - page 76
Connection to the water supply , Do not drink water from the dishwasher! – The dishwasher can heat its own water to the temperature r equired by the wash program. This allows for connection of the machine to either a hot or cold water source. For lowest energy consumption connect the dishwasher to a cold water source. For fastest possible wash ti ...
-
Miele G 2830 SCi - page 77
Drainage – The machine comes equipped with a built-in non-return valve on the discharge side to prevent waste water from flowing back into the dishwasher . – The dishwasher is equipped with a 5 ft (1.5 m) flexible drain hose with an internal diameter of 7/8" (22 mm). – Drain hose extensions and adapters can be order ed from Miele. The ma ...
-
Miele G 2830 SCi - page 78
78 ...
-
Miele G 2830 SCi - page 79
79 ...
-
Miele G 2830 SCi - page 80
Alterations reserved/5205 G 2830 SCi / M.-Nr . 06 696 130 / 00 e n-U S ...
Hai una domanda su Miele G 2830 SCi?
Utilizza il modulo sottostante
Se non hai risolto il problema con Miele G 2830 SCi con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Miele G 2830 SCi è probabile che voglia condividere il modo di risolverlo.