Manuale per l’uso Polycom 1725-36031-001

51 pagine 0.37 mb
Scarica

Vai alla pagina of 51

Summary
  • Polycom 1725-36031-001 - page 1

    July 2008 Edition 1725-36031-001 Version H SpectraLink 8000 SVP Server SVP100, SVP020, SVP010 Administration Guide for Mitel and Cisco ...

  • Polycom 1725-36031-001 - page 2

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 2 Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom , Inc. in the Uni ted States of America and various countrie s. All other trademarks used herein are the pr ...

  • Polycom 1725-36031-001 - page 3

    PN: 1725-36031-001_H.doc 3 About This Guide This document explains how to configure and maintain one or more SpectraLink 8000 SVP Servers (m odels SVP100, SVP020, SVP 010) within IP telephony environments. Polycom Model Numbers This document covers the following registered model number: SVP100 Related Documents SpectraLink e340/h340/i640 Wireless T ...

  • Polycom 1725-36031-001 - page 4

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 4 Deploying Enterprise-Grade Wi-Fi Telephony Available at http://www.polycom.com/common/documents/products /voice/m obile/bestpractices_SLNK_032708.pdf Best Practices Guide for Deploying SpectraLink 8020/8030 Wireless Telephones Available at http://www.p ...

  • Polycom 1725-36031-001 - page 5

    PN: 1725-36031-001_H.doc 5 Contents 0 About This Guide ...................................................................... 3 Polycom Model Numbers ..................................................................3 Related Documents .............................................................................3 Customer Support .................. ...

  • Polycom 1725-36031-001 - page 6

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 6 The NetLink SVP-II System Menu .................................................24 Network Configuration ....................................................................25 SendAll .................................................................... ...

  • Polycom 1725-36031-001 - page 7

    Contents PN: 1725-36031-001_H.doc 7 7 Safety No tices ........................................................................ 49 8 Index ..................................................................................... 51 ...

  • Polycom 1725-36031-001 - page 8

    ...

  • Polycom 1725-36031-001 - page 9

    PN: 1725-36031-001_H.doc 9 SpectraLink 8000 SVP Server Overview The SpectraLink 8000 SVP Server is an Ethernet LAN device that works with access points (APs) to provide QoS on the wireless LAN. Voice packets to and from the SpectraLink 8000 Wireless Telephones are intercepted by the SVP Server and encapsulated for prioritization as they are routed ...

  • Polycom 1725-36031-001 - page 10

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 10 SVP Server Models The SVP Server is available in thr ee models. Which model is selected for your facility depends on current and expected capacity. All SVP Servers within a subnet must be the same model type. • SVP100 : Serves 80 calls simultaneousl ...

  • Polycom 1725-36031-001 - page 11

    SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 11 address. The wireless telephones an d the other SVP Servers locate the master by using a static IP address, DHCP, or DNS. The master SVP Server performs im portant coordinating functions. The loss of a non-master SVP Server does not significantly affect the operation of the remaining ...

  • Polycom 1725-36031-001 - page 12

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 12 not linear due to the Erlang 1 calculation for telephony traffic. The possible installed handsets figures are approximate and meant as a guideline and not as an absolute recommendation for any facility. Possible installed handsets Number of SVP Server ...

  • Polycom 1725-36031-001 - page 13

    SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 13 Notes on System Configuration In an IP system using subnets to differentiate telephony areas, each subnet must have its own APs. Each subnet may require an SVP Server to maintain voice quality, but this depends on traffic volume and router capacity. Multiple SVP Server environments ar ...

  • Polycom 1725-36031-001 - page 14

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 14 System Diagram The following diagram shows multiple SVP Servers residing on a network with an IP telephony gateway and IP tel ephony server, wireless LAN APs, and Ethernet switch: (IP telephony system example) SpectraLink Wireless Tele p hones Spectra ...

  • Polycom 1725-36031-001 - page 15

    SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 15 System Components SpectraLink e340/h340/i640 and 8020/8030 Wireless Telephones Employees can carry wireless telephon es to make and receive calls as they move throughout the building. The wireless telephones are to be used on-premises; they are not ce llular or satellite phones. Just ...

  • Polycom 1725-36031-001 - page 16

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 16 network traffic is restricted to those segments that are directly involved in the communication. Installation of a network router is recommended in larger networks, where there may be significant network traffic not related to the wi reless LAN. A rou ...

  • Polycom 1725-36031-001 - page 17

    SpectraLink 8000 SVP Server Overview PN: 1725-36031-001_H.doc 1 7 The Front Panel of the SVP Server The SVP Server’s front panel contains ports to connect to power, the LAN, and to an administrative computer via an RS-232 port. Status LEDs supply information about th e SVP Server’s functioning. RS-232 Port: male DB-9 connector (DTE) used for RS ...

  • Polycom 1725-36031-001 - page 18

    ...

  • Polycom 1725-36031-001 - page 19

    PN: 1725-36031-001_H.doc 19 Installing the SpectraLink 8000 SVP Server As shown in the system diagram, the SVP Server is connected to the Ethernet switch. The specificatio ns covered here allow for great flexibility in physical placement of the components within stated guidelines. See the Configuration and Administration document for your vendor’ ...

  • Polycom 1725-36031-001 - page 20

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 20 Locate the SVP Server The SVP Server measures approximately 4 x 12.5 x 7 inches, and weighs about five pounds. The unit can be wall- mounted, vertically or horizontally, over ¾" plywood. The SVP Server can also be rack- mounted using a rack- mou ...

  • Polycom 1725-36031-001 - page 21

    Installing the SpectraLink 8000 SVP Server PN: 1725-36031-001_H.doc 21 Mount the SVP Server to a wall The SVP Server can be mounted eith er horizontally or vertically. To mount the SVP Server to a wall: 1. Using a 1/8-inch drill bit, drill four pilot holes, on 1.84-inch by 12.1-inch centers (approximately equivalent to 1-13/16” by 12-1/8”). 2. ...

  • Polycom 1725-36031-001 - page 22

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 22 Connect SVP Server to LAN Using a Cat. 5 cable, connect the NETWORK port on the SVP Server to the connecting port on the Ethernet switch. Connect power 1. Once the units have been properly grounded, connect the power plug from the AC adapter to the ja ...

  • Polycom 1725-36031-001 - page 23

    PN: 1725-36031-001_H.doc 23 Configuring the SpectraLink 8000 SVP Server During initial setup of the SVP Server the IP address is esta blished and the maximum number of active calls per AP is set. Optionally, you may enter a hostname and a location for software updates via TFTP. Connecting to the SVP Server The initial connection to the SVP Server m ...

  • Polycom 1725-36031-001 - page 24

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 24 Connecting via telnet Telnet can only be used after the SVP Server’s IP address is configured. The telnet method of connection is used for routine maintenance of the SpectraLink Server for both local and remote administration, depending on your netw ...

  • Polycom 1725-36031-001 - page 25

    Configuring the Spectr aLink 8000 SVP Server PN: 1725-36031-001_H.doc 25 SVP-II Configuration Allows you to set the mode and reset the system. Network Configuration Allows you to set network configuration options, including IP address and hostname. Change Password Allows you to change the password for SVP Server access. Network Configuration The IP ...

  • Polycom 1725-36031-001 - page 26

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 26 Note the navigation options at the bottom of the screen. Press Enter to change a value, ESC to exit the screen, and the arrow keys to move the cursor. SendAll In an IP system with multiple SVP Servers, the SendAll option is provided to speed configura ...

  • Polycom 1725-36031-001 - page 27

    Configuring the Spectr aLink 8000 SVP Server PN: 1725-36031-001_H.doc 2 7 To change the IP address of the master SVP Server, change it in this menu and reboot the system. Then you may change alias IP addresses in each of the other SVP Servers without error. The following options must be configured: IP Address Enter the IP address of the SVP Server, ...

  • Polycom 1725-36031-001 - page 28

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 28 • IP Address : The IP address of a network TFTP server that will be used to transfer software updates to the SVP Server. DNS server and DNS domain These settings are used to config ure Domain Name services. Consult your system administrator for the ...

  • Polycom 1725-36031-001 - page 29

    Configuring the Spectr aLink 8000 SVP Server PN: 1725-36031-001_H.doc 29 selecting the Reset option in the SVP-II Configuration screen and then pressing Y upon exit. SVP Server Configuration The SVP-II Configuration screen is where you set the mode of the SVP Server. It is also where you can lock the SVP Server for maintenance and reset the SVP Ser ...

  • Polycom 1725-36031-001 - page 30

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 30 SVP-II Mode Defaults to NetLink IP for an IP environment. Press Enter to select and the screen is immediately redrawn with additional options for the IP environment. The following options must be configured: Phones per Access Point AP specifications a ...

  • Polycom 1725-36031-001 - page 31

    Configuring the Spectr aLink 8000 SVP Server PN: 1725-36031-001_H.doc 31 SVP-II Master The master SVP Server must be identified in an IP system. Select one of the following identification options: • Statically configure the IP address of the master SVP Server in each of the SVP Servers. Enter the IP address. See the Overview section for an explan ...

  • Polycom 1725-36031-001 - page 32

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 32 Alias IP Addresses are not necessary in Cisco sy stems. Enable H.323 Gatekeeper This option is no longer used. Ethernet Link The SVP Server will auto-negotiate unless there is a need to specify a link speed. System Locked This option is used to take t ...

  • Polycom 1725-36031-001 - page 33

    Configuring the Spectr aLink 8000 SVP Server PN: 1725-36031-001_H.doc 33 QoS Configuration Select this option to set the DSCP tags. See QoS Configuration section below. Reset System If this option is selected, you will be prompted to reset the SVP Server upon exiting this screen. Reset All SVP Servers If this option is selected, you will be prompte ...

  • Polycom 1725-36031-001 - page 34

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 34 QoS Configuration DSCP tags set packet priorities for QoS. DSCP Tag DSCP (Differentiated Services Code Point) is a QoS mechanism for setting relative priorities. Packets are tagged with a DSCP field in the IP header. The decimal value may be set as a ...

  • Polycom 1725-36031-001 - page 35

    Configuring the Spectr aLink 8000 SVP Server PN: 1725-36031-001_H.doc 35 When forwarding packets, the SVP Server shall always overwrite the received DSCP value. The final DSCP tag for packets in each of the traffic classes are assigned a DSCP value based on the following rules. (Please see table below.) • If both Administration and the Traffic Cl ...

  • Polycom 1725-36031-001 - page 36

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 36 Change Password If desired, the password to access the SVP Server may be changed. A password must meet the following requirements: • It must be more than four c haracters, but cannot exceed 16 characters. • The first character must be a letter. ? ...

  • Polycom 1725-36031-001 - page 37

    PN: 1725-36031-001_H.doc 3 7 Swapping/Adding/Deleting SVP Servers Whenever an SVP Server is removed from the system, wireless telephones that are using the SVP Server will be affected. If the removal of the SVP Server is inte ntional, the administrator should lock and idle the system prior to removing an SVP Server. Adding an SVP Server A new SVP S ...

  • Polycom 1725-36031-001 - page 38

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 38 Changing the Master SVP Server In the event the master SVP Serv er loses communication with the network, the wireless telephone syst em will fail. All SVP Servers will lock, all calls will be lost, and no calls can be placed. Therefore, if the master ...

  • Polycom 1725-36031-001 - page 39

    PN: 1725-36031-001_H.doc 39 Software Maintenance The SVP Server uses proprietar y software programs written and maintained by Polycom Corporation. The software versions that are running on the system components can be displayed via the System Status screen. You may obtain information about so ftware updates from Polycom or its authorized dealer. At ...

  • Polycom 1725-36031-001 - page 40

    ...

  • Polycom 1725-36031-001 - page 41

    PN: 1725-36031-001_H.doc 41 Troubleshooting via System Status Menu Information about system alarms, and network status displays on various screens accessed through the System Statu s Menu screen, which is opened from the main menu of the SVP Server. See the previous sections for directions on how to connect to the SVP Server and navigate to the Sys ...

  • Polycom 1725-36031-001 - page 42

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 42 Software Versions Lists the software version for each SpectraLink component. Gatekeeper Database Allows you to view activity of the gatekeeper database. Options on the System Status Menu provide a window into the real time operation of the components ...

  • Polycom 1725-36031-001 - page 43

    Troubleshooting via System Status Menu PN: 1725-36031-001_H.doc 43 Network Status The SVP Server is connected to the Ethernet network, referred to as the LAN or Local Area Network. The information about that connection is provided through the Network Stat us screen. From the System Status Menu , select Network Status . The screen displays informati ...

  • Polycom 1725-36031-001 - page 44

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 44 RX – Ethernet statistics concerning the received packets during System Uptime. bytes – by te s r ec ei ve d packets – packets received errors – Sum of all receive errors (long packet, short packet, CRC, overrun, alignment) drop – packets dro ...

  • Polycom 1725-36031-001 - page 45

    Troubleshooting via System Status Menu PN: 1725-36031-001_H.doc 45 Software Version The SVP Server and wireless telephones utilize Polycom Corporation’s proprietary software that is controlled and maintained through versioning. The Software Version screen provides information about the version currently runni ng on the SVP Server. This informatio ...

  • Polycom 1725-36031-001 - page 46

    SpectraLink 8000 SVP Server: Administ ration Guide for Mitel and Cisco PN: 1725-36031-001_H.doc 46 The table below shows the description, major version numbers, and filenames of the files that are pr ovided when downloading updates. Name Major Version Number Filename Table of contents 173 svp100.toc Functional code 174 zvmlinux File system 175 flas ...

  • Polycom 1725-36031-001 - page 47

    Troubleshooting via System Status Menu PN: 1725-36031-001_H.doc 4 7 Press the question mark (shift + ?) to open the H. 323 Gatekeeper Database Help screen: The help screen provides information about how to scroll and search the database. ...

  • Polycom 1725-36031-001 - page 48

    ...

  • Polycom 1725-36031-001 - page 49

    PN: 1725-36031-001_H.doc 49 Safety Notices WARNING: Changes or modifications to this equipment not approved by SpectraLink Corporation may cause this equipment to not comply with part 15 of the FCC rules and void the user’s authority to operate this equipment. WARNING: SpectraLink products contain no user-serviceable parts inside. Refer servicing ...

  • Polycom 1725-36031-001 - page 50

    ...

  • Polycom 1725-36031-001 - page 51

    PN: 1725-36031-001_H.doc 51 Index A Access point, description ..................................... 15 Alarms .................................................................... 42 C Configuratio n Initial setup ....................................................... 26 Customer Support .................................................. 4 D Downlo ...

Fabbricante Polycom Categoria Server

I documenti che otteniamo dal fabbricante del dispositivoPolycom 1725-36031-001 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Polycom
- manuali per l’uso 1725-36031-001
- schede prodotto Polycom
- opuscoli
- o etichette energetiche Polycom 1725-36031-001
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Polycom 1725-36031-001.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Polycom 1725-36031-001, manuali di manutenzione, brevi manuali o manuali utente Polycom 1725-36031-001. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Polycom 1725-36031-001.

Manuali per l’uso simili

Manuale completo del dispositivo Polycom 1725-36031-001, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Polycom 1725-36031-001 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Polycom 1725-36031-001.

Il manuale per l’uso completo Polycom, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Polycom 1725-36031-001 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Polycom 1725-36031-001, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Polycom 1725-36031-001 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Polycom 1725-36031-001 - che ci dovrebbe aiutare nei primi passi durante l'uso Polycom 1725-36031-001
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Polycom 1725-36031-001
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Polycom 1725-36031-001 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Polycom 1725-36031-001?

Utilizza il modulo sottostante

Se non hai risolto il problema con Polycom 1725-36031-001 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Polycom 1725-36031-001 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)