Italiano dropdown-ico

Manuale per l’uso Fujitsu 4Gbit/s FC I/O Modules

40 pagine 1.08 mb
Scarica

Vai alla pagina of 40

Summary
  • Fujitsu 4Gbit/s FC I/O Modules - page 1

    39 E Before Reading This Manual Thank you for purchasing the PRIMERGY 4Gbit/s FC I/O Module (hereinafter referred to as this product). This manual explains the 4Gbit/s FC I/O Modules and the Fibre Channel driver (for W indows). Read this manual carefully to handle the product correctly . For details about the Fibre Channel driver , refer to m anual ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 2

    40 Remarks W arning Descriptio ns V arious sym bols are used througho ut this manual. These are provided to em phasize important points for your safety and that of others. The sym bols and their meanings are as follows. Be sure to fully understand these before reading this manual. The following symbols are used to indicate the type of warning or ca ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 3

    41 E Abbrevia tions The following expressions and abbreviations are used to describe the product names used in this manu al. Safety For your safety and that of others, follow the guidelines provided on the following pages concerning the use of this product. Handling th is product W ARN I NG CAUTION Product names Expressions and abb reviations 4Gbit ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 4

    42 Checking the Items Supplied Check that the following items are supplied before using this product. Please contact an office listed in "Appendix B Contact Information" (  pg.75) if any parts are missing. • 4Gbit/s FC I/O Module (this product) • Driver Disk × 1 (CD-ROM) - 4Gbit/s FC I/O Module (PG-FCD201) Drivers CD • User&apos ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 5

    43 E Contents 1 4Gbit/s FC I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1.2 S pecificati ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 1.3 How to Check the Dri ver ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 6

    44 ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 7

    1 4Gbit/s FC I/O Module 45 E 1 4Gbit/s FC I/O Module This chapter explains the features and specifications of this product. 1.1 Overview This product is a Fibre Channel expansion board for use exclusively with BX620 S3 and BX620 S4 server blades. This product is configured with one dual port (2 ports) Fibre Channel controller , it is supplied to co ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 8

    46 1.2 Specifications This product is an expansion board used in order to install fiber channel interface on the server blade. This product has the following features: • Capable of high -speed data transfer at a m aximum rate of 4Gbps. • Y ou can place the connected device away from the ser ver . • Uses thin and light cables so they can be ea ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 9

    1 4Gbit/s FC I/O Module 47 E 1.3 How to Check the Driver V ersion The following explains the procedure to check the driver version. 1 Click the "Start" button → "Settings" → "Cont rol Panel" → "Administrative T ools" → "Computer Management" in this orde r . 2 Click "Device Manager" ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 10

    48 1.4 4Gbit/s FC I/O Module to ETERNUS Connections This section explains the connection of the 4Gbit/s FC I/O Module and ETERNUS. Fabric connection Connect to the ETERNUS via FC Switch Blade. 1.5 Notes on Replacing the 4Gbit/s FC I/O Module When an operating 4Gbit/s FC I/O Module has been replaced with a new 4Gbit/s FC I/O Module, it may be necess ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 11

    2 Installing the 4Gbit/s FC I/O M odule 49 E 2 Installing the 4Gbit/s FC I/O Module This chapter explains the installation procedure in the server blade. W ARNING CAUTION 2.1 Installing in a Server Blade  Install ing a FC Network Blade on chassis network bl ade slot 3 or ne twork blade slot 4 is necessary in order to co nnect this prod uct to th ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 12

    50 2.1.1 Installation Position of the 4Gbit/s FC I/O Module The 4Gbit/s FC I/O Module is installed in the server blade expansion board slot. 2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module 1 T urn off the server blade where the 4G bit/s FC I/O Module will be installed. → "3.3 Turning Of f the Server" in "Blade Server Sys ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 13

    2 Installing the 4Gbit/s FC I/O M odule 51 E 5 Install the 4Gbit/s FC I/O Module. Make sure the 4Gbit/s FC I/O Module is securely on the slot. 6 Secure the 4Gbit/s FC I/O Module with the scre ws. Secure the 4Gbit/s FC I/O Module with three screws included with this product. 7 Attach the top cover . → "7.2 Removing and Attaching the T op Cove ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 14

    52 3 Connecting Cables This chapter explains points to note when connecting cabl es. CAUTION For details on how to connect the cables, refer to "SilkW orm 4016 Hardware Reference Manual" and "SilkW orm 4016 Qu ickStart Guide".  Connect the cable to the FC Netw ork Blade installed in the BX600 S3 chassis, or the port used by t ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 15

    4 Installing Drivers and Utilities 53 E 4 Installing Drivers and Utilities This chapter explains the p rocedure for installing drivers and utilitie s. • For installing drivers and utility (HBAnyware) at the same time.  "4.1 Automatic Installation"(pg.53) • For installing drivers and utility (HBAnyware) manually .  "4.2 Manu ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 16

    54 1. Click [Next]. 2. Select "Find the best driver for the device", and click [Next]. 3. Check only "CD-ROM drive", and then click [Next]. 4. Click [Next]. 5. Click [Finish]. 7 Click [Finish]. When "System Se ttings Change" appears, click [Y es] to restart the system . 8 Refer to "1.3 How to Check the Driver V er ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 17

    4 Installing Drivers and Utilities 55 E 4.2 Manual Installation Drivers and utilities can be manually installed using the following procedures. 4.2.1 F or Installation on Windows Server 2003  When "Welcome to the Found N ew Hardw are Wizard" appe ars during startup, click [Cancel] . Installing Emu lex PLUS 1 Click the "S tart" ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 18

    56 Installing ***** port Miniport Drive r 1 Click the "Start" button → "Administrative T ools" → "Computer Management" in this order . 2 Click [Device Manager]. 3 Select "Emulex **********" in the "SCSI and RAID controllers" or "Other devices" list and double-click it.  If the disp ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 19

    4 Installing Drivers and Utilities 57 E 12 Check the driver version. •F o r 3 2 B i t 5.1.30 .9 •F o r 6 4 B i t 7.1.30 .9 13 Close the board property window . When installation finishes, perform "4.2.2 Installing HBAnyware" (  pg.57) . 4.2.2 Installing HBAnyware 1 Insert the driver disk (CD-ROM) into the CD-ROM drive, and execute ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 20

    58 4.3 Checking and Updati ng Firmware / BootBIOS There are two methods to check and update Firmware/BootBIOS. The results will bring no difference.  "4.3.1 Using LightPulse Utility / NT"(pg.58)  "4.3.2 Using HBAnyware Utility"(pg.60) 4.3.1 Using LightPulse Utility / NT This product name displayed in LightPulse Utility/NT ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 21

    4 Installing Drivers and Utilities 59 E 7 For the Bo otBIOS version, check the "Revision" value in "Bo ot Bios Firmware". • When the version is "1.70a3", proceed to S tep 11. • When the version is other than "1.70a3", proceed to S tep 8. 8 Click the [Download] button. Although the warning window appears, ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 22

    60 4.3.2 Using HBAnyware Utility This product name displayed in HBAnywar e Utility is "BX600-FC42E - 10:00:**:**:**:**:**:**". The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the stick er on each 4Gbit/s FC I/O Module. 1 Click ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 23

    4 Installing Drivers and Utilities 61 E 8 For the BootBIOS version , check the "BootBIOS" value in "Boot BIOS". • When the version is "1.70a3", proceed to S tep 13. • When the version is other than "1.70a3", proceed to S tep 9. 9 Click the "Update Firmware..." in "Firmware". When the c ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 24

    62 5 4Gbit/s FC I/O Module Details Setting This chapter explains the 4Gbit/s FC I/O Module details settings.  The setting ef fects are the sa me between the settings set by double -clicking [Device] of [key] after selecting [Registr y] with the radio button in the LightPulse Utili ty/NT settings, and the setting s set by the Global s etting (che ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 25

    5 4Gbit/s FC I/ O Module Details Setting 63 E 5.1 4Gbit/s FC I/O Module Setting There are two methods for this product setting . The results will bring no dif ference.  "5.1.1 Using LightPulse Utility / NT"(pg.63)  "5.1.2 Using HBAnyware Utility"(pg.68) 5.1.1 Using LightPulse Utility / NT This product name displayed in Lig ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 26

    64 4 Select the adapter for which settings are chang ed from the adapter list on the left of the window , a nd double-click "T opology" in "P arameters". When there are two or m ore adapters, refer to "Appendix A How to Identify the Adapter" (  pg.74). 5 Set a value for "New V alue" depending on the connec ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 27

    5 4Gbit/s FC I/ O Module Details Setting 65 E 7 Set a value in "New V alue", check "P ermanent", and click [Change]. When the settings vary for each adapter, remove the check on the "Global". The setting value is calculated as follows: For ETERNUS3000 model 50/GR710 /GR720/GR730/GR74 0/GR820/GR840 • For cluster (MSCS ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 28

    66 8 Double-click "QueueT arget" in "P a rameters". 9 Set "1" (fixed value) in "New V alue", check "Permanent", and click [Change]. 10 Double-click "LinkSpee d" in "Parameter". 11 Set a value in "New V alue", check "P ermanent", and click [Change]. For the set ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 29

    5 4Gbit/s FC I/ O Module Details Setting 67 E • When T opology is 0, QueueDepth is 8, and QueueT arget is 1 for all the adapters: 13 When the settings for all adapters finishe s, select "Exit" from "File" menu, and exit LightPulse Utility/NT . After exiting LightPulse Utility/NT perform " 5.2 Registry Setting" (  ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 30

    68 5.1.2 Using HBAnyware Utility This product name displayed in HBAnyware U tility/NT is "BX600FC42E - - 10:00:**:**:**:**:**:* *". The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the sticker on each 4Gbit/s FC I/O Module. For ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 31

    5 4Gbit/s FC I/ O Module Details Setting 69 E • When selected the adapter to be set and "Driver Parameters" (Individual setting for each adap ter) In the above diagram, "BX620 S3" represents a local server , and "BX600-FC42E - 10:00:00:00:C9:48:FE:0C" represents an installed 4Gbit/s FC I/O Module. 3 Click [T opology] ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 32

    70 For ETERNUS 4000 model 300/ 500 and ETERN US8000 Specify "255". 7 Double-click "QueueT arget" in "Adapter Parameters". 8 Set "1" (fixed value) in "V alue" in "Modify Adapter Parameter", and click [Apply]. 9 Click "LinkSpeed" in "Adapter P arameters". 10 Select the va ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 33

    5 4Gbit/s FC I/ O Module Details Setting 71 E 5.2 Registry Setting 1 Click the "Start" button → "Run..." in this order . 2 Enter a name in "Name" as follows, and click [OK]. regedit The registry editor starts. 3 Follow the paths belo w . HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services Disk 4 Check that the ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 34

    72 6 Troubleshooting This chapter explains the troubleshootin g methods when this produ ct is not running properly or when error messages are display ed. 6.1 Checking the Link Status The link status connection can be checked upon system start by starting the Light Pulse BIOS Utility . How to s tart the Li ght Pul se BIOS Utility When this product i ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 35

    6 Troubleshooting 73 E 6.2 T r oubleshooting Check the applicable items listed below if this product does not operate correctly . If the problem is not resol ved even after taking the following measu res, contact an office listed in "Appendix B Contact Information" (  pg.75). *: If the expansion ROM initialization value where this prod ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 36

    74 Appendix A How to Identify the Adapter This chapter explains h ow to identify the adapter . Each 4Gbit/s FC I/O Module has an IEEE Address. T he IEEE Address is on a sticker on the front or rear of this product. For PG-FCD201, there are two adapters and two IE EE Addresses. Due to this there are two IEEE a ddress labels. The IEEE Address value m ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 37

    Appendix B Contact Information 75 E Appendix B Contact Information • Australia: Fujitsu Australia Limited T el: +61-2-9776-4555 Fax: +61-2-9776-4556 Address: 2 Julius A venue (Cnr Delhi Road) North Ryde, Australia N.S.W . 21 13 • China: Fujitsu (China) Holdings Co., Ltd. T el: +86-21-5292-9889 Fax: +86-21-5292-9566 Address: 18F , Citic Square, ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 38

    76 • Singapore: Fujitsu Asia Pte. Ltd. T el: +65-6777-6577 Fax: +65-6771-5502 Address: 20, Science Park Road, #03-01 T eleT ech Park, Singapore Science Park I I, Singapore 1 17674 •T a i w a n : Fujitsu T aiwan Lim ited T el: +886-2-2311-225 5 Fax: +886-2-231 1-2277 Address: 19F , No.39, Section 1, Chung hwa Road T aipei, T aiwan • Thail and: ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 39

    P ● 本書の内容は、改善のため事前連絡なしに変更することがあります。 ● 本書に記載されたデータの使用に起因する、 第三者の特許権およびその他の 権利の侵害については、当社はその責を負いません。 ● 無断転載を禁じます。 ● 落丁、乱丁本は、お取 ...

  • Fujitsu 4Gbit/s FC I/O Modules - page 40

    こ のマ ニ ュ ア ルは再生紙 を 使用 し 、 リ サ イ ク ル に配慮 し て 製本 さ れ て い ま す 。 不要に な っ た際は、 回収 ・ リ サ イ ク ル に出 し て く だ さ い 。 ...

Fabbricante Fujitsu Categoria Network Router

I documenti che otteniamo dal fabbricante del dispositivoFujitsu 4Gbit/s FC I/O Modules possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Fujitsu
- manuali per l’uso 4Gbit/s FC I/O Modules
- schede prodotto Fujitsu
- opuscoli
- o etichette energetiche Fujitsu 4Gbit/s FC I/O Modules
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Fujitsu 4Gbit/s FC I/O Modules.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Fujitsu 4Gbit/s FC I/O Modules, manuali di manutenzione, brevi manuali o manuali utente Fujitsu 4Gbit/s FC I/O Modules. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Fujitsu 4Gbit/s FC I/O Modules.

Manuali per l’uso simili

Manuale completo del dispositivo Fujitsu 4Gbit/s FC I/O Modules, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Fujitsu 4Gbit/s FC I/O Modules dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Fujitsu 4Gbit/s FC I/O Modules.

Il manuale per l’uso completo Fujitsu, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Fujitsu 4Gbit/s FC I/O Modules - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Fujitsu 4Gbit/s FC I/O Modules, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Fujitsu 4Gbit/s FC I/O Modules che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Fujitsu 4Gbit/s FC I/O Modules - che ci dovrebbe aiutare nei primi passi durante l'uso Fujitsu 4Gbit/s FC I/O Modules
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Fujitsu 4Gbit/s FC I/O Modules
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Fujitsu 4Gbit/s FC I/O Modules in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Fujitsu 4Gbit/s FC I/O Modules?

Utilizza il modulo sottostante

Se non hai risolto il problema con Fujitsu 4Gbit/s FC I/O Modules con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Fujitsu 4Gbit/s FC I/O Modules è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)