Italiano dropdown-ico

Manuale per l’uso JVC SR-9168U

54 pagine 0.62 mb
Scarica

Vai alla pagina of 54

Summary
  • JVC SR-9168U - page 1

    INTRODUCTION CONTROLS AND CONNECTORS PREPARATION RECORDING PLAYBACK AND SPECIAL-EFFECTS PLAYBACK TROUBLE- SHOOTING CONNECTIONS MONITOR ON-SCREEN DISPLAY SETTING OF THE FUNCTION MENU SWITCHES APPENDIXES OPTIONAL SA-K97U RS-232C INTERFACE BOARD INSTRUCTIONS VIDEO CASSETTE RECORDER SR-9168U R REC PLAY FF REW REVERSE PAUSE/ STILL REC CHECK STOP/EJECT C ...

  • JVC SR-9168U - page 2

    2 SAFETY PRECAUTIONS CAUTION ATTENTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ELECTROCUTION NE PAS OUVRIR Le symbole de l’éclair à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’une “tension dangereuse” non isolée dans le boîtier du produit. Cette tension est suffisante pou ...

  • JVC SR-9168U - page 3

    3 CONTENTS 1 INTRODUCTION 1-1 Major Features .............................................. 4 1-2 Periodical Maintenance ................................. 4 1-3 Precautions ................................................... 5 1-4 Daily Inspection ............................................. 5 2 CONTROLS AND CONNECTORS 2-1 Front Panel ............ ...

  • JVC SR-9168U - page 4

    4 5 Recording Check function Pressing the [REC CHECK] button during recording allows you to check the status of the recording in progress. When activated via the corresponding function menu switch, the built- in head cleaner automatically cleans the heads whenever inferior picture quality is detected during Recording Check. After cleaning, the Reco ...

  • JVC SR-9168U - page 5

    5 1-3 Precautions 5 Handle the unit carefully • Do not place anything heavy on the unit (a monitor, etc.). A malfunction may occur. • Do not put any foreign substance into the cassette loading slot. • Avoid violent shocks to the recording chassis during transportation. Remove the cassette tape from the unit for transportation. 5 Turn off the ...

  • JVC SR-9168U - page 6

    6 2 CONTROLS AND CONNECTORS 2-1 Front Panel 1 [OPERATE] button Press to turn the operating power ON/OFF. When this button is ON, the OPERATE indicator lights and the unit can be operated. When a cassette is inserted, the power switches on and the OPERATE indicator lights automatically. The OPERATE button does not completely shut off the mains power ...

  • JVC SR-9168U - page 7

    7 2-1 Front Panel 7 Display section For details, refer to page 8. 8 [COUNT/CLOCK] button Press this button to select the time display or tape counter in the display. When the power is turned off, the time is displayed. 9 [TIME MODE] button Use to select the recording or playback time mode. Each time this button is pressed, the recording/playback ti ...

  • JVC SR-9168U - page 8

    8 2 CONTROLS AND CONNECTORS 2-2 Display 2 3 4 5 1 6 8 9 11 12 13 7 10 14 blinks. For details, refer to page 41. 6 TIMER indication Lights during timer recording programming/operation. 7 REPEAT indication Lights when the VCR is in the Repeat Record mode. 8 OVERLAP indication Blinks when programs scheduled for timer recording overlap. 9 Timer program ...

  • JVC SR-9168U - page 9

    9 CAM SW OUT ALARM IN COM COM ALARM REC OUT SERIES/CLOCK ALARM RESET TAPE END OUT WARNING /REC OUT IN OUT 8 7 1 2 3 4 6 5 VIDEO AUDIO IN IN OUT OUT REMOTE MIC IN CAM SW OUT ALARM IN COM COM ALARM REC OUT SERIES/CLOCK ALARM RESET TAPE END OUT WARNING /REC OUT IN OUT 2-1 FRONT P ANEL 2-3 Rear Panel 2 CONTROLS AND CONNECTORS 1 Power cable Connect the ...

  • JVC SR-9168U - page 10

    10 CAM SW OUT ALARM IN COM COM ALARM REC OUT SERIES/CLOCK ALARM RESET TAPE END OUT WARNING /REC OUT IN OUT 9 10 11 12 13 14 15 16 17 VIDEO AUDIO IN IN OUT OUT REMOTE MIC IN CAM SW OUT ALARM IN COM COM ALARM REC OUT SERIES/CLOCK ALARM RESET TAPE END OUT WARNING /REC OUT IN OUT 2 CONTROLS AND CONNECTORS button 1. Hold the button down and insert the w ...

  • JVC SR-9168U - page 11

    11 VIDEO AUDIO IN IN OUT OUT REMOTE MIC IN CAM SW OUT ALARM IN COM COM ALARM REC OUT SERIES/CLOCK ALARM RESET TAPE END OUT WARNING /REC OUT IN OUT CCD 3-1 Connecting to a Camera 3 CONNECTIONS Amplifier Microphone Microphone RCA BNC Video camera BNC RCA Alarm sensor Monitor TV 1 Connect the monitor’s video/audio input connectors to the SR-9168U’ ...

  • JVC SR-9168U - page 12

    12 CCD CCD CCD CCD CCD CCD 1 2 3 4 5 6 1 2 3 4 5 6 VIDEO AUDIO IN IN OUT OUT REMOTE MIC IN CAM SW OUT ALARM IN COM COM ALARM REC OUT SERIES/CLOCK ALARM RESET TAPE END OUT WARNING /REC OUT IN OUT 3-2 Connecting a System Using a Sequential Switcher 3 CONNECTIONS 1 Connect video cameras and alarm sensor to a sequential switcher (frame switcher). 2 Con ...

  • JVC SR-9168U - page 13

    13 3-3 Connecting the Rear Panel Input/Output T erminal Connections [CAM SW OUT] camera switching signal output terminal [ALARM IN] alarm signal input terminal [ALARM RESET] alarm reset terminal [ALARM REC OUT] alarm recording mode signal output terminal [TAPE END OUT] tape end output terminal [WARNING/REC OUT] warning signal/recording mode signal ...

  • JVC SR-9168U - page 14

    14 1 2 : 3 0 : 4 5 L18H 1 1 – 6 – 1999 L18 H 1 2 : 3 0 : 4 5 1 1 – 6 – 1999 1 1 – 6 – 1999 L18H 1 2 : 3 0 : 4 5 1 1 – 6 – 1999 1 2 : 3 0 : 4 5 L18H 4 MONITOR ON-SCREEN DISPLA Y Status information and other data including date/time, alarm input data, power loss (power failure) data and total operation hours can be displayed on a conn ...

  • JVC SR-9168U - page 15

    15 COUNT/ CLOCK TIME MODE TIMER REC AL/PL RESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.LOCK RESET /CANCEL OPERATE SR-9168U OPE. LOCK ON 4-2 Main Menu Display You can display date and time data recorded when an alarm input or power failure occurs, as well as the hour meter (drum rotating time) by selecting the desired item in the main men ...

  • JVC SR-9168U - page 16

    16 ALARM IN A L – 0 0 1 2 0 : 3 0 9 – 6 – 9 9 A L – 0 0 2 2 1 : 4 4 1 0 – 6 – 9 9 A L – – – – – – : – – – – – – – – – – A L – – – – – – : – – – – – – – – – – A L – – – – – – : – – – – – – – – – – A L – – – – – – : – – – – ...

  • JVC SR-9168U - page 17

    17 MAIN MENU PROGRAM TIMER FUNCTION ALARM IN POWER LOSS HOUR METER CLOCK ADJUST PRESS (SHIFT, SET) PRESS (MENU) TO END A LARM / SENSOR REC MODE (ALARM REC) (SENSOR REC) (REC MODE) (DURATION) (BUZZER) (TAPE END MODE) PRESS (SHIFT, SET) PRESS (MENU) TO END ON SCREEN MODE (POSITION) L –UP PRESS (SHIFT, SET) PRESS (MENU) TO END VTR MODE 1 (SHARPNESS) ...

  • JVC SR-9168U - page 18

    18 5-2 Contents of the Function Menu Switches 5 SETTING OF THE FUNCTION MENU SWITCHES Three function menu switch setting screens are available. [ ]: Factory setting Function Screens Items Set values On-screen POSITION [L-UP] mode setting R-UP R-BOTTOM L-BOTTOM OFF Sets the on-screen position of time/date and recording mode data. If no on- screen di ...

  • JVC SR-9168U - page 19

    19 5-2 Contents of the Function Menu Switches 5 SETTING OF THE FUNCTION MENU SWITCHES [ ]: Factory setting Function Screens Items Set values VTR mode 2 SUMMER TIME [OFF] setting ON Turns summer time compensation on or off. OFF : Clock is not adjusted for summer (daylight saving) time. ON : Clock is adjusted for summer (daylight saving) time. TERMIN ...

  • JVC SR-9168U - page 20

    20 5-2 Contents of the Function Menu Switches 5 SETTING OF THE FUNCTION MENU SWITCHES Function Screens Items Set values VTR mode 2 COUNT END [OFF] setting 500 1000 9500 : : Sets the timing to process tape end at a specified counter value rather than at the actual tape end. This menu switch setting is effective in the 48H to 240H Record modes. For t ...

  • JVC SR-9168U - page 21

    21 COUNT/ CLOCK TIME MODE TIMER REC AL/PL RESET MENU SHIFT/TRACKING SET/V.LOCK RESET /CANCEL 6 PREP ARA TION 6-2 Date and T ime Setting • Time-keeping continues even when the power cable is unplugged from the AC outlet or a power failure occurs. • If the power cable has been unplugged for a long time of period, check the current time before usi ...

  • JVC SR-9168U - page 22

    22 1 7 : 3 0 : 0 1 L24H 9 – 30 – 1999 MAIN MENU PROGRAM TIMER FUNCTION ALARM IN POWER LOSS HOUR METER CLOCK ADJUST PRESS (SHIFT, SET) PRESS (MENU) TO END CLOCK ADJUST YEAR 2000 MONTH 1 DAY 1 HOUR 0 MINUTE 0 PRESS (SHIFT, SET) PRESS (MENU) TO END CLOCK ADJUST YEAR 1999 MONTH 9 DAY 30 HOUR 17 MINUTE 30 PRESS (SHIFT, SET) PRESS (MENU) TO END 6 PRE ...

  • JVC SR-9168U - page 23

    23 During daylight savings time 1 Set the time with one-hour delay. 2 After setting the time, set the <SUMMER TIME> switch to "ON". • The set time advances one hour. 3 At the end of the daylight savings time season, set the <SUMMER TIME> switch to OFF. • The standard time instead of "Summer Time" is displayed. Se ...

  • JVC SR-9168U - page 24

    24 7 RECORDING 7-1 Preparation Connection Make sure the input/output connectors on the rear panel are properly connected. For details, refer to "CONNECTIONS" on page 11 to 13. Menu switch setting Set the function menu switches as required. 5 <POSITION> ... Factory setting: L-UP • Sets the position of the on-screen time/date and re ...

  • JVC SR-9168U - page 25

    25 7 RECORDING 7-2 Recording [REC CHECK] button Error indicator E-09 display During recording Recording Normal Recording Defective Recording check Display Defective During recording Recording check Defective Error indicator E-09 (for 10 sec.) [REC CHECK] button v When set to MANUAL v When set to AUTO Recording Check Record Check in the Timelapse mo ...

  • JVC SR-9168U - page 26

    26 COUNT/ CLOCK TIME MODE TIMER REC AL/PL RESET MENU SHIFT/TRACKING SET/V.LOCK RESET /CANCEL 7-3 Timer Recording Two types of timer recording are available: daily timer (by specifying the date) and weekly timer (by specifying the day of the week). • Daily timer : Set the date to any date within one year of the current date. Up to 8 programs can b ...

  • JVC SR-9168U - page 27

    27 PROGRAM TIMER (DAILY) START END MODE 1. – – – – – – – : – – – – : – – – – H 2. – – – – – – – : – – – – : – – – – H 3. – – – – – – – : – – – – : – – – – H 4. – – – – – – – : – – – – : – – – – H 5. – – – – – – – : ? ...

  • JVC SR-9168U - page 28

    28 PROGRAM TIMER ( DAILY) START END MODE 1. – – – – – – – : – – – – : – – – – H 2. – – – – – – – : – – – – : – – – – H 3. – – – – – – – : – – – – : – – – – H 4. – – – – – – – : – – – – : – – – – H 5. – – – – – – – : ...

  • JVC SR-9168U - page 29

    29 7-3 Timer Recording 7 RECORDING Canceling timer programming To stop timer programming 1 Press the [RESET/CANCEL] button. The program being set is canceled. 2 Press the [MENU] button twice. [ The normal screen mode is restored. To cancel a preset timer program 1 Press the [TIMER REC] button to turn off the TIMER indication in the display. 2 Turn ...

  • JVC SR-9168U - page 30

    30 7-3 Timer Recording 7 RECORDING Changing a preset timer program 1 Press the [TIMER REC] button to turn off the TIMER indication in the display. 2 Turn the VCR and the monitor on. 3 Press the [MENU] button to display the main menu screen and select <PROGRAM TIMER> with the [SHIFT +/-] button. Then, press the [SET +/-] button. [ The timer pr ...

  • JVC SR-9168U - page 31

    31 AL TIME MODE 7 RECORDING 7-4 Alarm Recording Alarm recording functions during timelapse recording. When an alarm signal is input to the rear panel's ALARM IN terminal, an index code is recorded on the tape and the VCR automatically switches to the 6H (EP),18H or 30H mode for realtime recording of the alarm situation. Normal timelapse record ...

  • JVC SR-9168U - page 32

    32 A LARM / SENSOR REC MODE (ALARM REC) ON (SENSOR REC) OFF (REC MODE) (DURATION) 180SEC (BUZZER) OFF (TAPE END MODE) STOP PRESS (SHIFT, SET) PRESS (MENU) TO END 6H 7-4 Alarm Recording Connect an alarm sensor to the rear panel’s alarm input terminal. Preparation 1 Press the [OPERATE] button to turn the operating mode on. Setting the function menu ...

  • JVC SR-9168U - page 33

    33 7 RECORDING 7-5 Sensor Recording Sensor recording is executed only when the VCR is in the Stop mode (Stop or Timer Record Standby mode) and an alarm signal is input to the rear panel’s ALARM IN terminal. Perform the settings for sensor recording in the same way as for "Alarm Recording" on page 31. The mechanism of the SR-9168U cannot ...

  • JVC SR-9168U - page 34

    34 VTR MODE 1 (SHARPNESS) NORMAL (AUTO REC) OFF (REC CHECK) AUTO (TAPE END MODE) REPEAT (INDEX SEARCH) OFF (CAMERA SW) OFF (TAPE END BUZZER) OFF (WARNING BUZZER) OFF PRESS (SHIFT, SET) PRESS (MENU) TO END 7-6 Repeat Recording When the tape reaches the end during recording, it is automatically rewound and recording starts again from the beginning. 5 ...

  • JVC SR-9168U - page 35

    35 7-7 Series Recording The series recording function facilitates recording over much longer periods using several connected SR-9168Us. As soon as the tape ends in one VCR, the next VCR in the series starts recording. 7 RECORDING 5 Connect the first VCR’s [SERIES/CLOCK OUT] terminal to the second VCR’s [SERIES/CLOCK IN] terminal. Connect the se ...

  • JVC SR-9168U - page 36

    36 TERMINAL SEL 1 Set to EXT. (External recording function) VTR MODE 2 (SUMMER TIME) OFF (TERMINAL SEL 1) EXT (TERMINAL SEL 2) WARN (REC REMAIN) OFF (COUNT END) OFF PRESS (SHIFT, SET) PRESS (MENU) TO END 7-8 Recording with External VCR Activation Signal Recording start/stop can be controlled externally by inputting a VCR activation signal to the [S ...

  • JVC SR-9168U - page 37

    37 VTR MODE 1 (SHARPNESS) NORMAL (AUTO REC) ON (REC CHECK) MANUAL (TAPE END MODE) REPEAT (INDEX SEARCH) OFF (CAMERA SW) OFF (TAPE END BUZZER) ON (WARNING BUZZER) OFF PRESS (SHIFT, SET) PRESS (MENU) TO END VTR MODE 1 (SHARPNESS) NORMAL (AUTO REC) ON (REC CHECK) MANUAL (TAPE END MODE) REPEAT (INDEX SEARCH) OFF (CAMERA SW) OFF (TAPE END BUZZER) OFF (W ...

  • JVC SR-9168U - page 38

    38 8 PLA YBACK AND SPECIAL-EFFECTS PLA YBACK [STOP/EJECT] button Playback mode indication [TIME MODE] button [PLAY] button [OPERATE] button 8-1 Preparation Connection Make sure the output connectors on the rear panel are properly connected. Function menu switch settings Set the function menu switches as required. 5 [SHARPNESS] . . . Factory setting ...

  • JVC SR-9168U - page 39

    39 8 PLA YBACK AND SPECIAL-EFFECTS PLA YBACK [PLAY] button [REW] button [REVERSE] button [FF] button [PAUSE/STILL] button 8-3 Special-Effects Playback Reverse playback 1 Press the [REVERSE] button in the Play or Still mode. The reverse indicator is shown on the display and the Reverse mode is engaged. Reverse playback is executed at 6H (EP) mode sp ...

  • JVC SR-9168U - page 40

    40 VTR MODE 1 (SHARPNESS) NORMAL (AUTO REC) OFF (REC CHECK) MANUAL (TAPE END MODE) STOP (INDEX SEARCH) ON (CAMERA SW) OFF (TAPE END BUZZER) OFF (WARNING BUZZER) OFF PRESS (SHIFT, SET) PRESS (MENU) TO END 8-4 Index Search Searching the index code (VISS signal) recorded at the start of alarm recording helps you quickly locate alarm recordings (index ...

  • JVC SR-9168U - page 41

    41 VTR MODE 1 (SHARPNESS) NORMAL (AUTO REC) OFF (REC CHECK) MANUAL (TAPE END MODE) REPEAT (INDEX SEARCH) OFF (CAMERA SW) OFF (TAPE END BUZZER) OFF (WARNING BUZZER) ON PRESS (SHIFT, SET) PRESS (MENU) TO END 9 TROUBLESHOOTING 9-1 Error Indication Error indications are shown on the display whenever there are problems with cassette loading, unloading o ...

  • JVC SR-9168U - page 42

    42 9-2 No Error Indication 9 TROUBLESHOOTING Symptoms No power is supplied. Operation buttons have no effect during recording and playback. No picture is shown during playback. Noise appears in the picture in the Shuttle Search mode and Still mode. Noise appears in part of the playback picture. When the cassette is played back, the picture becomes ...

  • JVC SR-9168U - page 43

    43 CN607 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD Functions that can be controlled with front panel buttons and switches can also be controlled from a personal computer when the optional SA-K97U RS-232C interface board is installed. Operation status can also be monitored on the computer. 10-1. Installation of the SA-K97U The procedure is shown ...

  • JVC SR-9168U - page 44

    44 10-2. SA-K97U Specifications 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD 9-pin connector specifications Pin NO. Signals Operations Direction of signals 2 RXD Receive data VTR p CPU 3 TXD Transmit data VTR [ CPU 4 DTR Data terminal ready VTR [ CPU 5 GND Signal ground 6 DSR Data set ready VTR p CPU 1 2 3 4 5 6 9 5 Mode : 5 Character length : 5 D ...

  • JVC SR-9168U - page 45

    45 01 2 3 4 5 6 7 8 9 A B C D E F 0 Data “0” ENTER 1 COMPLE- Data “1” CLEAR TION ERROR 2 ERROR Data “2” COUNT RESET 3 CASSETTE Data “3” EJECT OUT 4 Data “4” 5 NOT Data “5” TARGET 6 Data “6” CLEAR JVC TABLE1 ON 7 Data “7” STATUS JVC SENSE TABLE1 OFF 8 Data “8” 9 Data “9” A ACK PLAY REV REC REC PLAY REQUEST B N ...

  • JVC SR-9168U - page 46

    46 10-3. SA-K97U RS-232C Protocol & Commands This section provides technical data for programmers. Command description 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD TXD B0H 33H 40H RXD 0AH 0AH 0AH 01H (or 05H) Search start Time 30H 0AH To use the commands described in the following pages, prepare the VCR for communications as follows: Transmit ...

  • JVC SR-9168U - page 47

    47 After transmitting the VISS SEARCH command (17), transmit the appropriate 2-byte numeric data (from 30H to 39H), the data input command (40H), and either FF (ABH) or REW (ACH). All commands should be transmitted separately one byte at a time with “ACK” (0AH) confirmation from the VCR after each transmission. (17) VISS SEARCH (B3H) : To searc ...

  • JVC SR-9168U - page 48

    48 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD 5 Date and time setting commands (1) DATE SET (8EH) : Set the current date (month, day, year) for the VCR. After this command (8EH) is sent, input 1- byte numerical data (30H — 39H). (Example) Sep., 30, 1998 (2) TIME SET (8FH) : Set the current time (hour, minute, second) for the VCR. After this co ...

  • JVC SR-9168U - page 49

    49 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD 2-3 Commands for VCR status verification (1) DATE SENSE (BEH) : The VCR returns the currently set month, day and year as 6 bytes. Each byte has a value of 30H to 39H. 30H corresponds to 0 and 39H to 9. (Example: For Sep., 14, 1999, the VCR returns 30H, 39H, 31H, 34H, 39H and 39H.) (2) TIME SENSE (BFH ...

  • JVC SR-9168U - page 50

    50 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD 1st byte BIT Status when BIT is “1”. 0 Error Indicates that an illegal command has been received. No further commands will be accepted. To restore to normal operation, transmit CLEAR ERROR (41H) to the VCR. 1 Not defined Always 0. 2 Not defined Always 0. 3 Cassette out The tape has not been loade ...

  • JVC SR-9168U - page 51

    51 10. OPTIONAL SA-K97U RS-232C INTERF ACE BOARD 2-4 Others (Input data correction/Error cancellation) These are return codes from the SR-9168U. (Error-related codes only) (1) ERROR (02H) : This is returned when commands of more than 1 byte are transmitted to the VCR and an illegal command is received in the 2nd byte (or later) of the transmitted c ...

  • JVC SR-9168U - page 52

    52 Time During recording During standby 1 field 5m sec GND Timelapse recording Camera switching signal (open-collector output) 11-1 Rear Panel’ s Input/Output [CAM SW OUT] camera switching signal output The CAM SW OUT terminal outputs a camera switching timing signal to the connected sequential switcher. The switching interval can be set with the ...

  • JVC SR-9168U - page 53

    53 11 APPENDIXES 11-2 Specifications [Time/date] 5 Display 5 Display position 5 Character size 5 Power backup [Alarm] 5 Alarm input 5 Camera switching output [Accessories] 5 Operation-lock key Month, day, year, hours, minutes, seconds, recording mode Variable (four coners) 16H Approx. five years (may be less depending on the operating environment) ...

  • JVC SR-9168U - page 54

    R VICTOR COMPANY OF JAPAN, LIMITED © 1999 VICTOR COMPANY OF JAPAN, LIMITED SR-9168U VIDEO CASSETTE RECORDER is a registered Trademark owned by VICTOR COMPANY OF JAPAN,LTD. is a registered Trademark in Japan,the U.S.A., the U.K. and many other countries. Printed in Japan SL96170 ...

Fabbricante JVC Categoria VCR

I documenti che otteniamo dal fabbricante del dispositivoJVC SR-9168U possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici JVC
- manuali per l’uso SR-9168U
- schede prodotto JVC
- opuscoli
- o etichette energetiche JVC SR-9168U
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso JVC SR-9168U.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione JVC SR-9168U, manuali di manutenzione, brevi manuali o manuali utente JVC SR-9168U. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto JVC SR-9168U.

Manuali per l’uso simili

Manuale completo del dispositivo JVC SR-9168U, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare JVC SR-9168U dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti JVC SR-9168U.

Il manuale per l’uso completo JVC, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale JVC SR-9168U - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice JVC SR-9168U, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per JVC SR-9168U che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo JVC SR-9168U - che ci dovrebbe aiutare nei primi passi durante l'uso JVC SR-9168U
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del JVC SR-9168U
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio JVC SR-9168U in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su JVC SR-9168U?

Utilizza il modulo sottostante

Se non hai risolto il problema con JVC SR-9168U con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con JVC SR-9168U è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)