Manuale per l’uso EDGE Tech 50200

9 pagine 0.16 mb
Scarica

Vai alla pagina of 9

Summary
  • EDGE Tech 50200 - page 1

    Caterpillar 3126 B & E models Edge EZ Module Installation Instructions & Manual OLD P/N: ECAT1000 NEW P/N: 50200 ...

  • EDGE Tech 50200 - page 2

    2 Table of Contents DISCLAIMER OF LIABILITY ___________________________________________________ 3 LIMITATION OF WARRANTY __________________________________________________ 3 Installation Instructions _________________________________________________________ 5 Supplied It ems: ____________________________________________________________________ 5 It ...

  • EDGE Tech 50200 - page 3

    3 THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK . Do not use this product until you have carefully read the following agreement. This sets forth the terms and conditions for the use of this product. The in stallation of this product indicates that the BUYER has read and understands this agreement and accepts its terms and conditions DISC ...

  • EDGE Tech 50200 - page 4

    4 THIS PRODUCT AND THE B OOST ELBOW (if installed) MUST BE REMOVED W HEN TAKING VEHICLE TO VEHICLE D EALERSHIP OR OTHER SER VICE FACILITY!! LEAVING PRODUCT INSTALLED MAY AFFECT DEALER DIA GNOSTIC ANALYSIS AN D SCAN TOOL FUNCTIONS!! This warranty is void for any new products purchased through auction websites. Warranty is valid only for new products ...

  • EDGE Tech 50200 - page 5

    5 Installation Instructions Please read these instructions through completely and thoroughly understand each step prior to installation . IMPORTANT: Read all Disclaimer, Warranty, and Installation Instructions before installing product Supplied Items: 1. Power Edge EZ CAT Module 2. Three Wire Ties 3. Two Velcro Strips 4. One hose clamp 5. One Brass ...

  • EDGE Tech 50200 - page 6

    6 Harness Connector – Your ECAT1000 module may be equipped with a harness that can be disconnected at th e module itself (See figure 1A). It is important to make sure that your ECAT 1000 module is always connected to the harness when the wiring harness is connected to the vehicle, otherwise the vehicle may not run properly, or may trip engine “ ...

  • EDGE Tech 50200 - page 7

    7 Boost Sensor Connection 1. The boost sensor is located on the driver’s side of the engine as shown in the photo. Disconnect the stock connector and plug in the supplied connectors that are located closest to the Power Edge EZ CAT module. IAP Sensor Connection 2. The IAP sensor is located on the driver’s side towards the front of the engine. D ...

  • EDGE Tech 50200 - page 8

    8 7. Using the 7/16” wrench, unscrew the stoc k brass elbow out of the turbocharger housing. Using the 7/16” wrench, install the supplied brass elbow, tighten-be careful not to over-tighten. Slip the supplied hose clamp onto the stock hose, install the stock hose onto the newly inst alled brass elbow and tighten the hose clamp with the ¼” so ...

  • EDGE Tech 50200 - page 9

    9 Technical Support: 888-360-3343 To expedite your support call, please have part number (i.e., EAF2100A), version number, and Date of Manufacture ready prior to calling support . ...

Fabbricante EDGE Tech Categoria Computer Drive

I documenti che otteniamo dal fabbricante del dispositivoEDGE Tech 50200 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici EDGE Tech
- manuali per l’uso 50200
- schede prodotto EDGE Tech
- opuscoli
- o etichette energetiche EDGE Tech 50200
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso EDGE Tech 50200.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione EDGE Tech 50200, manuali di manutenzione, brevi manuali o manuali utente EDGE Tech 50200. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto EDGE Tech 50200.

Manuali per l’uso simili

Manuale completo del dispositivo EDGE Tech 50200, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare EDGE Tech 50200 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti EDGE Tech 50200.

Il manuale per l’uso completo EDGE Tech, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale EDGE Tech 50200 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice EDGE Tech 50200, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per EDGE Tech 50200 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo EDGE Tech 50200 - che ci dovrebbe aiutare nei primi passi durante l'uso EDGE Tech 50200
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del EDGE Tech 50200
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio EDGE Tech 50200 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su EDGE Tech 50200?

Utilizza il modulo sottostante

Se non hai risolto il problema con EDGE Tech 50200 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con EDGE Tech 50200 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)