-
Murray 11052x92D - page 1
The owner must be certain that all the product information is included with the unit. This information includes the INSTRUCTION BOOKS, the REPLACEMENT P ARTS and the W ARRANTIES. This information must be included to make sure state laws and other laws are followed. PRODUCT INFORMA TION Read and keep this book for future reference. This book contain ...
-
Murray 11052x92D - page 2
2 F–031305L MURRA Y , INC. T wo Y ear Limited Warranty Murray , Inc. warrants to the original purchaser that this unit shall be free from defects in ma- terial and workmanship under normal use and service for a period of T wo (2) Y ears from the date of purchase; however , this warranty does not cover engines, accessories (such as snow blowers, s ...
-
Murray 11052x92D - page 3
OWNER’S INFORMA TION 3 F–031305L This instruction book is written for a person with some mechanical ability . Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability . Read and follow these instructions before you use the unit. Know your produ ...
-
Murray 11052x92D - page 4
SAFETY RULES 4 F–031305L Safe Operation Practices for Cultivator W ARNING: Look for this symbol to point out important safety precautions. It means: “Attention! Become Alert! Y our Safety Is Involved.” W ARNING: T o prevent acciden- tal starting when setting–up, transporting, adjusting or mak- ing repairs, always disconnect spark plug wire ...
-
Murray 11052x92D - page 5
SAFETY RULES 5 F–031305L (such as wheel weights, counterweights, and the like. S Never operate the cultivator at high trans- port speeds on hard or slippery surfaces. Look behind and use care when backing. S Never allow bystanders near the cultivator . S Keep children and pets away while operating. S Never operate the cultivator without good visi ...
-
Murray 11052x92D - page 6
SAFETY RULES 6 F–031305L INTERNA TIONAL SYMBOLS IMPORT ANT : Many of the following symbols are located on your unit or on literature sup- plied with the product. Before you operate the unit, learn and understand the purpose for each symbol. Control And Operating Symbols Slow Fast W ARNING Thrown Objects. Keep Bystanders Away . W ARNING Rotating P ...
-
Murray 11052x92D - page 7
ASSEMBL Y 7 F–031305L ASSEMBL Y P ARTS P ACKED SEP ARA TEL Y IN CARTON 1 – Owner ’s Manual (not shown) 1 – Upper Handle 1 – Right Lower Handle 1 – Left Lower Handle 1 – Parts Bag W ARNING: Always wear safety glasses or eye shields while as - sembling the cultivator . Figure 1 shows the cultivator completely as- sembled. References to ...
-
Murray 11052x92D - page 8
ASSEMBL Y 8 F–031305L 3. Insert the right lower handle into the mounting channel (see Figure 3). Make sure the flat end at the top of the handle is facing inward. 4. Mount a spacer on each screw . Push the screws through the tine shield , the lower handle , and half way through the engine casing (see Figure 4). 5. Insert the left lower handle int ...
-
Murray 11052x92D - page 9
ASSEMBL Y 9 F–031305L n CHECKLIST For the best performance and satisfaction from this quality product, please review the following checklist before you operate the cultivator: n All assembly instructions have been completed. n Check carton. Make sure no loose parts remain in the carton. n All fasteners have been properly tight- ened. As you learn ...
-
Murray 11052x92D - page 10
OPERA TION 10 F–031305L KNOW YOUR CUL TIV A TOR READ THE OWNER’S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERA TE the cultivator. T o familiarize yourself with the location of the controls, compare the illustrations with your cultivator . Save this manual for future reference. Tines Figure 6 Throttle Control Lever Upper Handle Fuel Cap Lower Han ...
-
Murray 11052x92D - page 11
OPERA TION 11 F–031305L HOW TO USE THE CUL TIV A TOR How T o Stop The Cultivator 1. Release the throttle control to stop the tines. 2. Move the ON/OFF switch, on the engine, to the OFF position. How T o Set The Depth Y our model will either have a depth stake or a depth rod to control the tilling depth and the forward speed. Set the depth stake o ...
-
Murray 11052x92D - page 12
OPERA TION 12 F–031305L BEFORE ST ARTING THE ENGINE How T o Prepare The Engine W ARNING: Always use a safety fuel container . Do not smoke when adding the fuel mixture to the engine. When inside an enclosure, do not fill the fuel tank. Before you add the fuel mixture, stop the engine. Let the engine cool for several minutes. How T o Mix The Fuel ...
-
Murray 11052x92D - page 13
OPERA TION 13 F–031305L HOW TO ST ART THE ENGINE Before you start the engine, make sure that you have read and understand all the in- structions on the preceding pages. 1. Fill the fuel tank to 1/2 inch below the bottom of the fill neck. Reinstall the fuel tank cap securely . Always use fresh fuel. Never use fuel that could be stale from long per ...
-
Murray 11052x92D - page 14
OPERA TION 14 F–031305L CUL TIV A TING TIPS S Tilling is digging in, turning over and breaking up packed soil before planting. Loose unpacked soil helps root growth. Best tilling depth is 4 to 6 inches. A tiller will also clear the soil of unwanted vege- tation. The decomposition of this vegeta- tion matter enriches the soil. Depending on the cli ...
-
Murray 11052x92D - page 15
MAINTENANCE 15 F–031305L CUSTOMER RESPONSIBILITIES SER VICE RECORDS Fill in dates as you complete regular service. Before Each Use After First 2 Hours Every 25 Hours Every 75 Hours Before Storage Before Each Season SERVICE DA TES Tighten All Screws and Nuts √ √ Lubricate Tine Shaft √ √ Lubricate Transmission √ √ Check Spark Plug √ ? ...
-
Murray 11052x92D - page 16
MAINTENANCE 16 F–031305L LUBRICA TION Every 25 hours and/or at the beginning of each season, make sure the gear box is filled with lubricant (see Figure 9). Tubes of gear lubricant are available from most auto- motive supply stores. Use portable tool grease such as Lubriplate 630AA (Product No. 06787, 1–3/4 oz. tube) or Lubriplate GR–132 (Pro ...
-
Murray 11052x92D - page 17
MAINTENANCE 17 F–031305L SP ARK PLUG Check the spark plug every 25 hours. Re- place the spark plug if the electrodes are pitted or burned or if the porcelain is cracked. 1. Make sure the spark plug is clean. Clean the spark plug by carefully scrap- ing the electrodes (do not sand blast or use a wire brush). 2. Check the spark plug gap with a feel ...
-
Murray 11052x92D - page 18
SERVICE AND ADJUSTMENT 18 F–031305L HOW TO REMOVE AND INST ALL THE TINES References to the right or left side of the cul- tivator are from the viewpoint of the opera- tor ’s position behind the unit. All four tines are different and cannot be in- terchanged. The tines must be correctly installed or the cultivator will not function properly . T ...
-
Murray 11052x92D - page 19
SERVICE AND ADJUSTMENT 19 F–031305L HOW TO ADJUST THE CARBURET OR A dirty air cleaner will cause the engine to run improperly or to smoke excessively . Be- fore adjusting the carburetor , make sure the air cleaner is clean. Never make unneces- sary adjustments to the carburetor . The car- buretor was set at the factory to operate efficiently unde ...
-
Murray 11052x92D - page 20
SERVICE AND ADJUSTMENT 20 F–031305L STORAGE W ARNING: Never store the cul - tivator indoors with fuel in the fuel tank. Never store in an en- closed, poorly ventilated area where fumes could reach an open flame, a spark or a pilot light as on a furnace, wa - ter heater or clothes dryer . W ARNING: Do not remove gas - oline while inside a building ...
-
Murray 11052x92D - page 21
TROUBLE SHOOTING CHART 21 F–031305L TROUBLE CAUSE CORRECTION Engine difficult to start Stale fuel mixture Drain fuel tank. Fill with fresh fuel mixture. or T oo much oil in fuel mixture Check fuel mixture chart and mix fresh fuel. Engine runs erratically Dirt in fuel tank or out of fuel Clean fuel tank. Engine runs erratically or Carburetor out o ...
-
Murray 11052x92D - page 22
MODEL 1 1052x92D 22 F–031305L REF . UPPER HANDLES 10 11 12 13 14 17 REF . LOWER HANDLES REF . TINE SHIELD REF . THROTTLE MOUNT SCREW 323392C KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 10 2.0HP Engine 1 1 56694 Flat washer 12 335350 Rotor 13 120380 Washer 14 001x90 Screw 17 319306 Cable, Throttle –– F–031305L Instruction Man ...
-
Murray 11052x92D - page 23
MODEL 1 1052x92D 23 F–031305L 318848C 31 1 300 312 310 KEY NO. P ART NO. DESCRIPTION 300 1901017 T ransmission 310 339390E701 Bracket, Depth Rod 31 1 180024 Screw , 1/4–20x1.25 312 782585 Nut, 1/4–20 ...
-
Murray 11052x92D - page 24
MODEL 1 1052x92D 24 F–031305L 323393A 480 482 483 481 495 494 490 490 495 496 492 491 496 493 482 49 4 323393A 485 484 KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 480 7401015 * Shield, Tine * 481 310056 Screw , 1/4–20x5.50 482 672734 Spacer, Flange 483 782585 Nut, 1/4–20 484 48x894 Decal, Murray 485 48x4031 Decal, Caution 490 ...
-
Murray 11052x92D - page 25
MODEL 1 1052x92D 25 F–031305L 323396B 663 662 661 650 660 KEY NO. P ART NO. DESCRIPTION 650 331 176 Z Wheel Support Assy . 660 56123 Clevis Pin 661 31x4 Hair Pin 662 338307 T ire & Rim 663 73664 Push On Nut ...
-
Murray 11052x92D - page 26
MODEL 1 1052x92D 26 F–031305L 319375C REF . THROTTLE CONTROL 930 932 934 943 941 942 947 944 946 948 950 949 KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 930 7401025 * Upper Handle * 932 339398E701 Lower Handle LH 934 7401022 * L ow er H andle RH + 941 56199 Bolt 5/16–18x1.63 942 783000 Formed W asher 943 120393 Flat washer 944 1 ...
-
Murray 11052x92D - page 27
NOTES 27 F–031305L ...
-
Murray 11052x92D - page 28
HOW TO ORDER REP AIR P ARTS F–031305L Only use a factory repair part. Repair parts, except for the engine or the transmission, are available from the store where the unit was purchased, a service shop recommended by the store, or an authorized service shop found in the yellow pages of the telephone directory . If you cannot get a repair part or s ...
Hai una domanda su Murray 11052x92D?
Utilizza il modulo sottostante
Se non hai risolto il problema con Murray 11052x92D con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Murray 11052x92D è probabile che voglia condividere il modo di risolverlo.