-
D-Link DGS-1008T - page 1
DGS - 1008T 8 - Port 10/100/1000Mbps Gigabit Ethernet Switch User’s Guide ...
-
D-Link DGS-1008T - page 2
T ABLE OF C ONTENTS ABOUT THIS GUIDE ........................................................................... 1 T ERMS ................................................................................................ 1 O VERVIEW OF THIS U SER ’ S G UIDE ........................................................ 1 INTRODUCTIO N ................... ...
-
D-Link DGS-1008T - page 3
A BOUT T HIS G UIDE This user’s guide tells you how to install your 8 - Port 10/100/1000Mbps Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network. Terms For simplicity, this documentation use s the terms “Switch” (first letter upper case) to refer to the 8 - Port 10/100/1000Mbps Gigabit Ethernet Switch, and “switch” ...
-
D-Link DGS-1008T - page 4
I NTRODUCTION This section describes the features of the 8 - Port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet and switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSM ...
-
D-Link DGS-1008T - page 5
Gigabit Ethernet supports video conferencing, complex imaging, and similar data - intensive applications. Likewise, since data transfers occur 10 times faster than Fast Ethe rnet, servers outfitted with Gigabit Ethernet NIC’s are able to perform 10 times the number of operations in the same amount of time. Switching Technology Another key develop ...
-
D-Link DGS-1008T - page 6
Switching LAN technology is a marked improvement over the previous generation of network bridges, whi ch were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router and the setup and maintenance required make routers relatively impractical. Today’s switches are an ideal solutio n to ...
-
D-Link DGS-1008T - page 7
U NPACKING AND S ETUP This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One 8 - Port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Accessory pack : 2 mounting brackets and screws ♦ Four rubber fe ...
-
D-Link DGS-1008T - page 8
♦ Visually inspect the po wer cord and see that it is secured fully to the AC power connector. ♦ Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with ...
-
D-Link DGS-1008T - page 9
Rack Installation The Switch can be mounted in an EIA standard size, 19 - inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets on the switch’s front panel (one on each side) and secure them with the screws provided. Attaching the mounting brackets to the Switch Then, use the screws provi ...
-
D-Link DGS-1008T - page 10
I DENTIFYING E XTERNAL C OMPONENTS This chapter describes the front panel, rear panel and LED indicators of the Switch Fro nt Panel The front panel of the Switch consists of 8 1000BASE - T ports and LED indicators. Front panel view of the Switch ♦ Eight Gigabit Ethernet ports of 10/100/1000Mbps Auto - Negotiation interface. ♦ Comprehensive LED ...
-
D-Link DGS-1008T - page 11
Rear panel view of the Switch ♦ AC Power Connector This is a three - pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz. LED Indicators The LED indicators of the Switch include ...
-
D-Link DGS-1008T - page 12
Per unit: ♦ Power This indicator lights green when the Switch is receiving power , otherwise, it is off. Per port: ♦ 1000M LINK/ACT . These LED indicators are lit when there is a secure connection (or link) to 1000Mbps Gigabit Ethernet device at any of the ports. The LED indicators blink whenever there is reception or transmission (i.e. Activit ...
-
D-Link DGS-1008T - page 13
T ECHNICAL S PECIFICATIONS General Standards: IEEE 802.3ab 1000BASE - T IEEE 802.3u 100BASE - TX IEEE 802.3 10BASE - T Protocol: CSMA/CD Data Transfer Rate: 10Mbps (Half - duplex) Ethernet: 20Mbps (Full - duplex) 100Mbps (Half - duplex) Fast Ethernet: 200Mbps (Full - duplex) Gigabit Ethernet: 2000Mbps (Full - duplex) Topology: Star Network Cables: ...
-
D-Link DGS-1008T - page 14
Physical and Environmental AC inputs : 100 – 240 VAC Universal, 50/60 Hz Power Consumption : 40 watts maximum Operating Temperature : 0 ~ 50 degrees Celsius Storage Temperature : - 10 ~ 55 degree Celsius H umidity : 5% ~ 95% RH, non - condensing Dimensions : 440 mm x 200 mm x 44 mm (1U), 19 inch rack - mount width EMI: FCC Class A, CE Mark Class ...
D-Link DGS-1008Tについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもD-Link DGS-1008Tの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがD-Link DGS-1008Tで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。