-
Silicon Laboratories F321DC - page 1
Rev. 0.1 3/08 Copyright © 2008 by Silicon Labo ratories C8051F321DC T oolS tick-F321DC T OOL S TICK C8051F321 D AUGHTER C ARD U SER ’ S G UIDE 1. Handling Recommendations T o enable development, the T oolS tick Base Adapter and daughter cards are distribut ed without any protective plastics. T o prevent damage to the d evices and/or t he host PC ...
-
Silicon Laboratories F321DC - page 2
T oolS tick-F321DC 2 Rev. 0.1 2. Content s The T oolS tick-F321DC kit contain s the following items: T oolS tick C8051F321 Daughter Card A T oolS tick daughter car d requires a T oolS tick Base Adapter to communicate with the PC. T oolS tick Base Adapters can be purchased at www .silabs.co m/toolstick . 3. T oolStick Overview The purpose of the ...
-
Silicon Laboratories F321DC - page 3
T oolS tick-F321DC Rev. 0.1 3 4. Getting St arted The necessary sof tware to download, debu g and communicate with the t arget microcontroller must be do wnloaded from www .silabs.com/toolstick . The following software is necessary to build a project, download code to, and communicate with the target microcontr oller: Silicon Laboratories Integ ...
-
Silicon Laboratories F321DC - page 4
T oolS tick-F321DC 4 Rev. 0.1 5.2. Keil Demonstration T oolset 5.2.1. Keil Asse mbler and Link er The Keil demonstration toolse t assembler and linker place no restrictions on code size. 5.2.2. Keil Demonstration C 51 C Compiler The evaluation version of the C51 compiler is the same as the full version with the following limitations: Maximum 4 ...
-
Silicon Laboratories F321DC - page 5
T oolS tick-F321DC Rev. 0.1 5 5.4. Keil uV ision2 and uVisi on3 Silicon Labor atories Drivers As an alternative to the Silicon Labo ratories IDE, the uVisi on debug driver allows the Keil uVision2 and uV ision3 IDEs to communicate with Silicon La boratories on-chip debug logic. In-system Flash memory programming integrated into th e driver allows f ...
-
Silicon Laboratories F321DC - page 6
T oolS tick-F321DC 6 Rev. 0.1 6. T oolStick C8051F321 Daughter Card Features Demo The T oolS tick kit includes a few simple code exampl es. The example descri bed in this section is titled F321DC_Feature sDemo . The purpose of this example is to guide a new user throug h the features and capabilities of the IDE and demonstrate the microcontr oller ...
-
Silicon Laboratories F321DC - page 7
T oolS tick-F321DC Rev. 0.1 7 6.2. Connecting to the Device and Downloading Firmware This section describe s how to open the IDE, open a nd build a project, connect to a device and down load the firmware. 1. Open the Silicon Lab oratories IDE from the Star t → Programs → Silicon Laboratories menu. 2. In the IDE, go to Project → Open Project . ...
-
Silicon Laboratories F321DC - page 8
T oolS tick-F321DC 8 Rev. 0.1 6.4. Viewing and Modifying Registers All registers on the device can be viewed and modified wh en th e device is in a halted state . The registers are grouped to gether acco rding to which pe ripheral o r part of hardware they belong. As an example, this guide shows how to open the ADC0 Debug Window and di sa ble the A ...
-
Silicon Laboratories F321DC - page 9
T oolS tick-F321DC Rev. 0.1 9 6.5. Enabling and Using W atch Windows The Debug Windows in th e View menu are u sed to view and modify hardware register s. T o view and modify variables in code, the IDE pr ovides W atch Windows. Just as with regist er debug windows, variables in the watch windows are updated each time the device is halted. This sect ...
-
Silicon Laboratories F321DC - page 10
T oolS tick-F321DC 10 Rev. 0.1 6.6. Setting and Running to Breakpoint s The Silicon Laboratories microcontroller devices support up to four hardw are breakpoints. A breakpoint is associated with a specific line of code. When the proc essor reaches a hardware breakpoin t, the code execution stops, and th e IDE refreshes all debug and watch window s. ...
-
Silicon Laboratories F321DC - page 11
T oolS tick-F321DC Rev. 0.1 11 6.7. Single-Stepping Through Firmware The IDE supports the ability to single-step through firmware one assembly instruction at a ti me. The IDE reads the Flash from the device , converts the instructions to assembly and displays them in a disassembly window . The following steps show how to open the disassemb ly windo ...
-
Silicon Laboratories F321DC - page 12
T oolS tick-F321DC 12 Rev. 0.1 6.8. Using T oolStick T erminal This section describes how to use T oolS tick T erminal to communi cate with UART from th e PC to the daughter card through the T oolS tick Base Adapter . 1. If the Silicon Laboratories IDE is o pen, close the IDE. The IDE and the T oolS tick T erminal cannot communicate with the daught ...
-
Silicon Laboratories F321DC - page 13
T oolS tick-F321DC Rev. 0.1 13 7. Additional Demo Example In addition to the F321DC_Featur esDemo example firmware, the T oolS tick download p ackage also includes a demo project named F321 DC_HIDMouse.wsp . The instructions for running this de mo can be found at the top of the source file. The project an d source f iles for thes e demos ca n be fo ...
-
Silicon Laboratories F321DC - page 14
T oolS tick-F321DC 14 Rev. 0.1 10. C8051F321 Daught er Card Schematic Figure 6. C8051F321 Daughter Card Schema tic ...
-
Silicon Laboratories F321DC - page 15
T oolS tick-F321DC Rev. 0.1 15 N OTES : ...
-
Silicon Laboratories F321DC - page 16
T oolS tick-F321DC 16 Rev. 0.1 C ON T ACT I NFOR MA T IO N Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 T el: 1+(512) 416-8500 Fax: 1+(512) 416-9669 T oll Fr ee: 1+(877) 444-3032 Email: MCUinfo@silabs.com Internet: www .silabs .com Silicon Laboratories and Silicon Labs are trademarks of Silico n Laboratories Inc. Other products ...
Silicon Laboratories F321DCについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもSilicon Laboratories F321DCの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSilicon Laboratories F321DCで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。