-
SMK-Link VP6342 - page 1
Page 1 User’s Manual V ersaPoint R echargeable Wireless Media K eyboar d ...
-
SMK-Link VP6342 - page 2
Page 2 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certication This equipment has been te ...
-
SMK-Link VP6342 - page 3
Page 3 equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certication The term “IC” before the certication/registration number only signies that the Industry Canada technical specications were met. Declaration of conformity Hereby , SMK-LINK Electronics, In ...
-
SMK-Link VP6342 - page 4
Page 4 System Requirements Hardware: Desktop or notebook system with 2 available USB ports 1 for receiver dongle, 1 for charging Operating System: W indows 2000, XP , V ista or W indows 7 Package Contents 2.4GHz rechargeable wireless media keyboard 2.4GHz RF receiver USB dongle 2 x AAA rechar geable Ni-MH batteries USB charging cable USB adapter fo ...
-
SMK-Link VP6342 - page 5
Page 5 light located under the translucent scroll wheel. (See Fig. 1) 2. Please familiarize yourself with the various indicators below (See Fig 2.) Pairing of RF When receiver dongle is successfully paired up with the keyboard LED lights up for approx. 3 seconds Battery-Low When battery is low LED ashes slowly Charging Battery During charging LE ...
-
SMK-Link VP6342 - page 6
Page 6 Installing Batteries Remove the battery cover located at the bottom of the keyboard. (See Fig. 3) Insert the two supplied AAA rechar geable Ni-MH batteries (included in the package) into the battery compartment. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. Repla ...
-
SMK-Link VP6342 - page 7
Page 7 Charging the batteries Do not attempt to charge non-rechar geable disposable Alkaline batteries. The batteries may leak and damage your keyboard. Use only the rechargeable Ni-MH batteries supplied. Shall replacing batteries become necessary use only rechargeable Ni-MH batteries. Do not mix new and old batteries or batteries of different bran ...
-
SMK-Link VP6342 - page 8
Page 8 It’ s recommended that you fully char ge the batteries before initial use; nevertheless it’ s ready for set up (see next step) anytime during charging. Connect the mini USB connector of the charging cable (included in the box) to the keyboard’ s mini USB port. (See Fig. 4) Connect the USB connector of the charging cable to your compute ...
-
SMK-Link VP6342 - page 9
Page 9 Pairing the Ke yboar d to the Receiver Dongle Make sure the computer ’ s power management is set to disable hibernation mode while the product is being charged. (Go to Control Panel, Power Options, select “Hibernate” from the tabs and uncheck the box marked “Enable Hibernation.) ...
-
SMK-Link VP6342 - page 10
Page 1 0 The radio frequency (RF) codes are factory preset for your convenience; the keyboard should already be paired up with the receiver at this point. Just connect the receiver dongle to the PC’ s USB port and wait for the OS to install the default driver in the background. The keyboard should be fully functional now . (See Fig. 5) If, for an ...
-
SMK-Link VP6342 - page 11
Page 11 1. Plug the mini USB connector of the USB adapter (included in the box) to the mini USB port on the keyboard. (See Fig. 6-1) 2. Connect the RF USB receiver dongle to the USB adapter while the adapter is plugged into the keyboard. Leave it connected for approximately 3 seconds until the RF indicator light on the keyboard scroller turns red; ...
-
SMK-Link VP6342 - page 12
Page 12 that the RF is successfully connected. Caution: the auto- pairing is taking place while the keyboard and the receiver are physically connected; do not remove the receiver dongle prematurely before the LED light turns red. (See Fig. 6-2) 3. Remove the receiver from the adapter , plug the receiver to the PC’ s USB port. Y ou are ready to us ...
-
SMK-Link VP6342 - page 13
Page 13 Operating Instructions This keyboard features the standard QWER TY conguration plus 8 convenient one-touch hot keys for Internet launch and media player controls. (See Fig. 8) 1. T rackball / W ake up T rackball: controls cursor movements similar to mouse functions. The trackball is designed with power-saving sleep mode which turns of f ...
-
SMK-Link VP6342 - page 14
Page 1 4 2. Scroller / Power-low Indicator LED: scrolls the screen up and down; same as the scroll wheel in a traditional mouse. Also doubles as power -low indicator: when scroller ashes with red LED light it’ s an indication that batteries need recharging. Just plug in the USB char ging cable to the keyboard and the computer to charge the bat ...
-
SMK-Link VP6342 - page 15
Page 15 W arr anty SMK-LINK warrants to the original end-user purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials or workmanship under normal use and service for one-year from date of purchase. Dated invoice or sales receipt is necessary to accompany the Product returned for warranty se ...
-
SMK-Link VP6342 - page 16
Page 1 6 contact information can be found on SMK-LINK website: http://www .smklink.com/support/contactsupport.html. This warranty does not affect your statutory right and you may also have other rights which vary from state to state. Unless modied in writing, signed by both you and SMK-LINK, this warranty is understood to be the complete and exc ...
SMK-Link VP6342についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSMK-Link VP6342の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSMK-Link VP6342で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。