Polycom DOC2558Aの取扱説明書

45ページ 0.69 mb
ダウンロード

ページに移動 of 45

Summary
  • Polycom DOC2558A - page 1

    Po l y c o m ® RMX ® 2000 System Hardware Guide Ve r s i o n 7.0 | August 2010 | DOC2558A ...

  • Polycom DOC2558A - page 2

    T rademark Information P olycom®, the P olycom “T riangles” logo, and th e names and marks associated with P olycom ’s products are trademarks and/or service marks of P olycom, Inc., and are registered and/or common-law marks in the Un ited States and various other count ries. All other trademarks are the property of th eir respective owners ...

  • Polycom DOC2558A - page 3

    Regulatory Notices United St ates Federal Comm unication Commission (FCC) Part 15: Class A St atement. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. T est limit s are designed to provide reasonable protection against harmful interference when the equipment is o ...

  • Polycom DOC2558A - page 4

    Compliant with European Battery Directiv e 2006/66/EC T o comply with the European Battery Directive 2006/ 66/EC, dispose of weak and worn out batteries in accordance with local and national regulations. Chinese Communication C ertificate Singapore Certificate Complies with IDA standards DA101619 Ta i w a n Russian Communication C ertificate The Po ...

  • Polycom DOC2558A - page 5

    Polycom RMX 2000 Hardware Guide i T able of Content s Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Main Features ..................... ................... ................. .................... ............. 1-1 RMX 2000 Specifications .... .................... .................... .................... ....... 1-2 RM ...

  • Polycom DOC2558A - page 6

    T able of Contents ii Replacing the Power Supply Module ............................. ........... 1-33 Replacing the Fan Drawer ......................... .................... .............. 1-34 Replacing a Faulty MPM/MPM+/MPMx Card ...................... 1-35 Removing the MPM/MPM+/MPMx Card from the MCU ... ............ ................. ......... ...

  • Polycom DOC2558A - page 7

    1 Hardware Description This Hardware Guide provides information on the RMX 2000 and its components. This system utilizes a modular “universal slot” platform, whose components are designed for high performance, capacity and reliance. Main Features The Polycom RMX 2000 offers the following features: •L i n u x ® b a s e d • Chassis based on ...

  • Polycom DOC2558A - page 8

    Chapter 1- Hardware Description 1-2 RMX 2000 Specifications T able 1-1 Polycom RMX 2000 Specifications Physical Height 3U (13.25 cm.) Width 19” (48.26 cm.) Depth 15.74” (40 cm.) Weight Up to 16.5 Kg. Media Protocols Audio G .71 1, G . 719, G .722, G .722.1, G .729A, G .723.1, Siren14, Siren 22. Video H.261, H.263, H.264. Network Interfaces IP , ...

  • Polycom DOC2558A - page 9

    Polycom RMX 2000 Hard ware Guide 1-3 RMX 2000 System Capacities The following table su mmarizes th e different syst em capacities. T able 1-2 System Functions and Capacities RMX 2000 System Functions MPM Mode MP M+ Mode MPMx Mode Maximum number of Video parti ci p ants in a conf erence 80 160 180 Maximum number of PSTN parti ci p ants in a conf ere ...

  • Polycom DOC2558A - page 10

    Chapter 1- Hardware Description 1-4 Maximum number of IVR Video Slides 150 150 1 50 Maximum number of Log Files (1Mb max.) 4000 4000 4000 Maximum number of CDR Files 2000 2000 4000 Maximum number of Fault Files 1000 1000 1000 Number of Participant alerts Unlimited Unlimited Unlimited Maximum number of concurrent RMX Web Client connections to the MC ...

  • Polycom DOC2558A - page 11

    Polycom RMX 2000 Hard ware Guide 1-5 R esource Capacities T able 1-3 System Resource Cap acities According to Video Resolution Video Resolution Resources with MPM+ Resources with MPMx HD Support CP / VSW CP / VSW PSTN 400 400 VOIP 800 720 CIF 160 180 SD30 60 120 720p 40 60 1080p30fps 20 (Asymmetric) 30 (Symmetric) 720p VSW 2Mb 160 160 1080p VSW 2Mb ...

  • Polycom DOC2558A - page 12

    Chapter 1- Hardware Description 1-6 Site R equirements This section describes the requiremen ts your site must meet for safe installation and operation of the system. Safety Requirements For your protection, please read th ese safety instructions completely before operating the equipment. • Look carefully for potential haza rds in your work area: ...

  • Polycom DOC2558A - page 13

    Polycom RMX 2000 Hard ware Guide 1-7 • In a single rack installation, stabiliz ers should be attached to the rack. • In multiple rack installations, the racks should be coupled together. • Always make sure the rack is st able before extending a component from the rack. • You should extend only one compone nt at a time - extending two or mor ...

  • Polycom DOC2558A - page 14

    Chapter 1- Hardware Description 1-8 RMX 2000 Components On the RMX 2000 components are located on both the front and rear of the MCU as listed in Table 1-4, " Polyc om RMX 2000 Component Description" . For more information see the descriptions of the " RMX 2000 Front Panel” on page 1-8 and " RMX 2000 Rear Panel” on page 1-11 ...

  • Polycom DOC2558A - page 15

    Polycom RMX 2000 Hard ware Guide 1-9 T able 1-4 Polycom RMX 2000 Component Description Component Description CNTL (CPU) Module The CNTL module controls and manages the R MX 2000. The CNTL module has an ComExpress Pentium-M 1.4GHz processor , a 40GB ha rd disk drive, 1GB Co mpact Flash and 1GB of DDR RAM. The Operating System i s Linux. Power Supply ...

  • Polycom DOC2558A - page 16

    Chapter 1- Hardware Description 1-10 Multi Processor Module+ (MPM+) Card The MPM+ cards, perfor m the various RTP , audio and video processing functions on the RMX 2000 unit. TI C6455 processors are at the core of each MPM+ card which are available in the follo wing assemblies: • MPM+20 (20 CIF resources) • MPM+40 (40 CIF resources) • MPM+80 ...

  • Polycom DOC2558A - page 17

    Polycom RMX 2000 Hard ware Guide 1-11 RMX 2000 R ear Panel The RMX 2000 rear panel contains th e RTM IP card and optionally, the RTM ISDN card. The RTM IP card must be located on the bottom slot in the rear of the RMX 2000. In additi on, the rear panel houses the main power switch, AC i nlet, a circuit br eaker, and additional communications ports. ...

  • Polycom DOC2558A - page 18

    Chapter 1- Hardware Description 1-12 The following items a ppear on the RMX 2 000 rear panel: T able 1-5 RMX 2000 Rear Pa nel - RTM IP Component De scription Item Description LAN 1 NA - Disconnected. Note: LAN 1 is covered with a plastic cap that shou ld no t be removed. LAN 2 Used for the Netw ork connection. LAN 3 Fo r Remote Access only using th ...

  • Polycom DOC2558A - page 19

    Polycom RMX 2000 Hard ware Guide 1-13 RTM ISDN The RTM ISDN card connects direct ly to an MPM/MPM+/MPMx. The RTM ISDN card routes data between the MPM/ MPM+/MPMx cards and components of the system, converts IS DN T1/E1 media to IP packets and provides connectivity to external ISDN networks. The RTM ISDN card is installed on the rea r panel of the R ...

  • Polycom DOC2558A - page 20

    Chapter 1- Hardware Description 1-14 Figure 1-3 RMX 2000 RTM ISDN Rear Panel Layout ISDN/PSTN Clock Source Each RTM ISDN card has its own primary and se condary clock source. The first span to synchronize be comes the primary clock source and the second span to synchronize becomes the secondary clock source. This clock is used to synchronize ISDN s ...

  • Polycom DOC2558A - page 21

    Polycom RMX 2000 Hard ware Guide 1-15 Cables Connected to the RTM IP & ISDN Cards All external connectors are located on the rear pane l. Figure 1-4 RMX 2000 Rear Panel View with Cables LAN 2 Connection Power Cable Off/On switch E1/T1 Connection Do not remove the protective caps from LAN1, LAN3 and ShMG ports. ...

  • Polycom DOC2558A - page 22

    Chapter 1- Hardware Description 1-16 RMX 2000 LEDs The RMX includes LEDs located on the front panel and rear panel. In the front panel, the LEDs reflect the state of the components. The LEDs on th e rear panel indicate the state of the ex ter nal connections and the status of the RTM IP card. RMX 2000 Front Panel LEDs The following items appear on ...

  • Polycom DOC2558A - page 23

    Polycom RMX 2000 Hard ware Guide 1-17 MPM/MPM+ Card ERR Red ON - Major error on card. Flashes - During card startup. RDY Green ON - The card has completed startup success fully . Flashes - During card startup. ACT Amber ON - At least one participant is connected to a con ference. Flashes - During card startup. HS Blue Flashes - Shut down process in ...

  • Polycom DOC2558A - page 24

    Chapter 1- Hardware Description 1-18 CNTL Unit ERR Re d ON - Major sys tem error . In case of an active alarm this light is ON, and the RDY green is OFF . OFF - Normal. Flashes - During system st artup. RDY Green ON - CPU card has successfully completed startup. This light turns green after completing the entire system configuration. OFF - T urns O ...

  • Polycom DOC2558A - page 25

    Polycom RMX 2000 Hard ware Guide 1-19 RMX 2000 R ear Panel LEDs RTM IP The following LEDs appear on the RTM IP card: T able 1-7 RMX 2000 RTM IP LEDs Component LED Name LED Color Description LAN LEDs (1-3) LNK Green ON with an active network connection, flickers with Packet activity . 1 Gb Amber ON with a 1Gb onl i ne connection, flickers with Packe ...

  • Polycom DOC2558A - page 26

    Chapter 1- Hardware Description 1-20 ShMG LEDs ERR Red ON - Ma jor error on RTM card. Flashes - During system startup. ACT Red ON - Packet flow to and fr om the MCU chassis . Flashes - During system startup. RDY Green ON - RTM IP card has successfully completed st artup. Flashes - During system startup. HS Blue OFF - Normal. Flashes - Duri ng power ...

  • Polycom DOC2558A - page 27

    Polycom RMX 2000 Hard ware Guide 1-21 RTM ISDN The following LEDs appear on the RTM ISD N: T able 1-8 RMX 2000 RTM ISDN LEDs Function Name LED Name LED Color Description LAN LED (1) LNK Green ON with an active network connection, flickers with Packet activity . 1 Gb Amber ON when 1Gb connection is online, flickers with Packet activity . ShMC LEDs H ...

  • Polycom DOC2558A - page 28

    Chapter 1- Hardware Description 1-22 MPM/MPM+ and MPMx Configuration Modes The RMX unit can work with either MPM or MPM+/MPMx (but not with both simultaneously ) media cards. The card Type installed in the system determines the Card Config uration Mode. When MPM card is installed in the MCU, it operates in an MPM Mode . If MPM+ cards are install ed ...

  • Polycom DOC2558A - page 29

    Polycom RMX 2000 Hard ware Guide 1-23 MPM+ Resource Capacities per Card T ype The MPM+ card offers increased reso urce capacities and capabilities. Three MPM+ card assemblies are available: MPM+ 80 , MPM+ 40 and MPM+ 20 offering various resource capa cities for CP conferences. In CP conferences: • Frame rate has been increased – with HD720p now ...

  • Polycom DOC2558A - page 30

    Chapter 1- Hardware Description 1-24 In HD Video Switching conferences: The recommended number of connections at HD1080p resolution in an RMX with two MPM+ cards is: • 160 participants at line rates of up to 2Mbps • 80 participants at line rates of up to 4Mbps • 40 participants at line rates of up to 6Mbps MPMx R esource Capacities per Card T ...

  • Polycom DOC2558A - page 31

    Polycom RMX 2000 Hard ware Guide 1-25 • ISDN support is the same as for MPM+/MPMx cards. • G.719 audio algorithm is not supported with MPMx. Operating Mode Selection During Startup / Restart When started with Version 7. 0 installe d, the RMX enters MPMx Mode by default when no media cards are installed. System Information Changes The System Inf ...

  • Polycom DOC2558A - page 32

    Chapter 1- Hardware Description 1-26 Example 1: Current status • An RMX has two MPM cards installed. •T h e Card Configuration Mod e is MPM . • Both MPM cards are enabled . Action 1. Remove one MPM card. 2. Insert one MPMx card. Result •T h e Card Configuration Mod e remains MPM . •T h e r e m a i n i n g MPM card remains enabled . •T h ...

  • Polycom DOC2558A - page 33

    Polycom RMX 2000 Hard ware Guide 1-27 • The remaining MPM card is disabled . Example 2: Current status • An RMX has one MPMx card installed . •T h e Card Configuration Mode is MPMx . •a n d t h e MPMx card is enable d . Action 1. Remove the MPM x card. 2. Insert one MPM car d. Result •T h e Card Configuration Mode remains MPMx . •T h e ...

  • Polycom DOC2558A - page 34

    Chapter 1- Hardware Description 1-28 RMX Chassis T ypes The RMX chassis can be of type A/B/C or D. The environmentally friendly D-ty pe chassis (indicat ed by the letter D in the Par t Number) is required for use with MPM+ card(s). The chassis type can be viewed in the Hardware Monitor, by right clicking Slot 0 and then clicking Properties. The RMX ...

  • Polycom DOC2558A - page 35

    Polycom RMX 2000 Hard ware Guide 1-29 Component R eplacement The RMX 2000 is designed with ease of maintenance in mind. Most components are swappable and are acce ssible directly vi a the front pane l or the rear panel. The following components can be re placed when they are faulty: • CNTL Module, see " Replacing the CNTL Module” on page 1 ...

  • Polycom DOC2558A - page 36

    Chapter 1- Hardware Description 1-30 T ypes of Ejector Leve rs on RMX Components On the RMX, 2 types of ejector levers can be attached to the cards: • An all metal (silver) lever • A modified PMC compatible ejecto r lever covered by plastic caps with a lock catch Using the All Metal Ejector Lever This ejector lever can be moved to 3 positions: ...

  • Polycom DOC2558A - page 37

    Polycom RMX 2000 Hard ware Guide 1-31 • Partia lly Open - For card powering down mode. Partially open the ejector lever(s) until the blue HS LEDs on the card and the Control Unit start flashing. When the HS LED is constantly lit the card is in a powered down mode and you can remove the card. • Fully Open - In th is position the card is released ...

  • Polycom DOC2558A - page 38

    Chapter 1- Hardware Description 1-32 3 Use the metal ejector levers to pull the CNTL Module out of its slot in the Backplane. 4 Carefully slide the CNTL Module out through the front panel. 5 On the CNTL Module to be installed, move the ejector lever to the fully open position. 6 Slide in the replacement CNTL Module. 7 Push the CNTL Module firmly in ...

  • Polycom DOC2558A - page 39

    Polycom RMX 2000 Hard ware Guide 1-33 R eplacing the Power Supply Module A single supply unit powers the RM X 2000. Use the following procedure to replace a Power Supply: 1 Ensure that the power switch on th e RMX 2000 is turned OFF (O) and that the power cords are disconnected from the MCU. 2 Unscrew the captive screws on the front panel of the RM ...

  • Polycom DOC2558A - page 40

    Chapter 1- Hardware Description 1-34 R eplacing the Fan Drawer Three fans are mounted in the Fan drawer, where the airflow is from right to left. Should one of these fans fail as indicated by a Fan LE D, you are required to replace the Fan drawe r. 1 Unscrew the captive screws on the front panel of the RMX 2000 that secure the Fan drawer. 2 Use the ...

  • Polycom DOC2558A - page 41

    Polycom RMX 2000 Hard ware Guide 1-35 R eplacing a Faulty MPM/MPM+/MPMx Card R emoving the MPM/MPM+/M PMx Card from the MCU All MPM/MPM+/MPMx cards can be instal led or removed while the RMX 2000 is powered on and operating. Prior to removing an MPM/MPM+/MPMx card the captive screws must be unscrewed and the ejector levers mu st be opened to initia ...

  • Polycom DOC2558A - page 42

    Chapter 1- Hardware Description 1-36 5 Carefully slide the MPM/MPM+/MPMx card out through the front panel. Installing the R eplacement MPM/MPM+/MPMx Card 1 On t he ca rd to b e in st all ed, mov e th e ejector levers to their fully open position. 2 Slide in the replacement MP M/MPM+/MPMx card. 3 Push the MPM/MPM+/MPM x card firmly into the Backplan ...

  • Polycom DOC2558A - page 43

    Polycom RMX 2000 Hard ware Guide 1-37 The blue HS LEDs on the MPM/MPM+/MPMx card and t he Control Unit start flashi ng and the power on cycle for t he card is initiated: — The card’s resources are added to the system resources list — The number of available ports on the RMX is increased to the current CFS license level — Port usage is re-ca ...

  • Polycom DOC2558A - page 44

    Chapter 1- Hardware Description 1-38 6 Slide in the replacement RTM ISDN card. 7 Insert the card into the slot until the ejector levers touch the front edge of the card cage. 8 Push the ejector levers to their fully closed position. 9 Tighten the captive screws on each side of the re ar panel of the card, securing the RTM ISDN card to RMX. 10 Turn ...

  • Polycom DOC2558A - page 45

    Polycom RMX 2000 Hard ware Guide 1-39 R eplacing the RTM IP Card The RTM IP card on the rear of the RMX 2000 provides connectivity to all the MCU modules. Use the following procedure to replace the RTM IP card: 1 Ensure that the power switch on the RMX 2000 is turned OFF (O). 2 Unscrew the captive screws on the rear panel of the RMX 2000 that secur ...

メーカー Polycom カテゴリー Server

Polycom DOC2558Aのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DOC2558Aの取扱説明書
- Polycomの製品カード
- パンフレット
- またはPolycom DOC2558Aの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Polycom DOC2558Aの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Polycom DOC2558Aの取り付け説明書、サービスマニュアル、簡易説明書、またはPolycom DOC2558Aのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Polycom DOC2558Aの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Polycom DOC2558Aデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPolycom DOC2558Aを使用するのを助ける技術的文書のことです。説明書は通常、全てのPolycom DOC2558Aユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Polycomの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Polycom DOC2558Aの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPolycom DOC2558Aの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Polycom DOC2558Aに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Polycom DOC2558Aデバイスの基本機能を使うにあたってのヒント。 Polycom DOC2558Aのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Polycom DOC2558Aに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPolycom DOC2558Aのメーカー/サービスへの連絡先に関する情報。

Polycom DOC2558Aについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPolycom DOC2558Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPolycom DOC2558Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)