-
Image IMTL715040 - page 1
Serial Number Decal Model No. IMTL715040 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete sat - isfaction through direct assis- tance f ...
-
Image IMTL715040 - page 2
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . ...
-
Image IMTL715040 - page 3
3 W ARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as descri ...
-
Image IMTL715040 - page 4
20. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in- cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the change. ...
-
Image IMTL715040 - page 5
5 Thank you for selecting the revolutionary IMAGE ® 23.0 Q treadmill. The IMAGE 23.0 Q treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in the conve - nience and privacy of your home. And when you’re not exercising, the unique IMAGE 23.0 Q treadmill can be folded up, requiring le ...
-
Image IMTL715040 - page 6
ASSEMBL Y Assembly requires two persons. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is assembled. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the ...
-
Image IMTL715040 - page 7
68 5 Collar Spring 20 55 Knob 105 3 Small Holes 3. With the help of a second person, raise the treadmill Frame (55). Hold the Latch Housing (68) and the Latch Housing Cover (5) against the Frame as shown. Loosely thread the two blunt-tipped 1/2” Screws (105) into the Latch Housing Cover and the Latch Housing as shown. Do not tighten the Screws ye ...
-
Image IMTL715040 - page 8
8 THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD ...
-
Image IMTL715040 - page 9
9 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to help you get the most from your workouts. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You ca ...
-
Image IMTL715040 - page 10
HOW TO TURN ON THE POWER Plug in the power cord (see page 8). Locate the reset /off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 9) and slide the clip onto the waistband of your cloth es. N ext, r ...
-
Image IMTL715040 - page 11
1 1 The right display —This display will show the dis- tance that you have walked or run, the number of 1/4-mile laps you have completed, the speed of the walking belt, and the approximate numbers of calories and fat calories you have burned (see FAT BURNING on page 26). Note: When a pro- gram is selected, this display will show the time remainin ...
-
Image IMTL715040 - page 12
12 HOW TO USE PRESET PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 10. Select one of the preset programs. When the key is in- serted, the manual mode will be selec ted. To select a preset pro- gram, press the Program Select button repeatedly until one of the six preset program indi- cators lights. Note: The di ...
-
Image IMTL715040 - page 13
13 To stop the program at any time, press the Stop button. The time will begin to fla sh in the le ft dis - play. To restart the program, press the Start button or th e Speed increase butt on. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automati- cally adj ust to the spee d and incli ...
-
Image IMTL715040 - page 14
HOW TO USE HEART RATE PROGRAMS Put on the optional chest pulse sensor. You must wear the optional chest pulse sensor (see page 21) to use a heart rate program. See the instructions included with the chest pulse sensor. Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 10. Select a heart rate program. When the key is in - s ...
-
Image IMTL715040 - page 15
15 Press the Start button or the Speed increase button to start the progr am. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking. During heart rate pro- grams, the matrix in the left display will show a heart beat symbol. Each t ...
-
Image IMTL715040 - page 16
HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be connected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 16 and 17 for connecting instructions. To use iFIT.com video- cassettes , the treadmill must be connected to your VCR. See page 18 for ...
-
Image IMTL715040 - page 17
17 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the ...
-
Image IMTL715040 - page 18
18 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 17. A. Plug one end of the audio cable into the ...
-
Image IMTL715040 - page 19
19 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the St ...
-
Image IMTL715040 - page 20
20 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the treadmill must be connected to your computer. See HOW TO CON- NECT YOUR COMPUTER on page 17. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements is found on our Web site. Follow the steps be ...
-
Image IMTL715040 - page 21
21 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to switch the console from miles to kilome- ters. In addition, the information mode allows you t ...
-
Image IMTL715040 - page 22
22 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold t ...
-
Image IMTL715040 - page 23
23 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill frame firmly with your left hand. Pull the latc h knob to the right. Pivot the treadmill down until the pin on the latch knob is below the handgrip. Slowly re- lease the latc h knob. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibi ...
-
Image IMTL715040 - page 24
24 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-753-4645, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The powe ...
-
Image IMTL715040 - page 25
25 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become dam- aged. Remove the key and UNPLUG THE POWER CORD . Using the included allen ...
-
Image IMTL715040 - page 26
26 The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. Th ...
-
Image IMTL715040 - page 27
27 To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. P ART LIST—Model No. IMTL715040 R0604A 1 2 Foot Rail 2 4 Foot Screw 3 1 Audio Wire 4 4 Isolator 5 1 Latch Housing Cover 6 1 Platform 7 4 Walking Platform Screw 8 1 Walking Belt 9 2 Frame Pivot Bolt 10 4 Frame Pivot Washer 11 1 Front Wheel/Pulley 1 ...
-
Image IMTL715040 - page 28
103 102 56 9 10 15 14 13 10 100 33 44 3 89 60 18 17 40 16 13 31 9 10 12 7 57 66 42 42 66 84 41 84 84 53 52 7 57 4 4 2 48 48 2 54 1 21 21 21 21 55 1 1 6 58 43 27 43 27 27 43 44 44 19 45 40 19 8 46 40 44 28 1 21 21 21 21 14 15 10 13 43 27 1 12 90 20 20 68 5 105 49* 53 52 108 108 30 40 40 39 40 62 40 40 38 37 109 40 36 35 34 50* 22 32 13 4 40 7 4 40 7 ...
-
Image IMTL715040 - page 29
80 26 63 23 81 40 40 29 79 40 70 64 40 40 40 40 40 76 40 40 40 51 40 40 40 40 40 40 40 40 40 40 40 40 40 75 61 93 82 43 95 97 96 106 107 92 71 101 72 67 99 83 99 83 69 94 85 77 78 98 43 104 104 73 13 77 78 73 13 98 43 86 13 91 1 10 88 1 1 1 13 137 137 13 40 40 88 65 69 94 69 EXPLODED DRA WING—Model No. IMTL715040 R0604A ...
-
Image IMTL715040 - page 30
LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The parts and labor are warranted for one (1) year after the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty ...
Image IMTL715040についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもImage IMTL715040の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがImage IMTL715040で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。