-
Emerson 7000 - page 1
Operator’s Manual 7000 Series Medium-Voltage Automatic Transfer Switches 4.76, 15.0, 27 kV; 1200, 2000, 3000 ampere 50 Hanover Rd., Florham Park, NJ 07 9 28 USA For sales or service call 800-80 0-2726 (ASCO) www.ascopower.com 381333-395 DANGER is used in this manual to warn of a hazard situation which, if not avoided, will result in death or seri ...
-
Emerson 7000 - page 2
i Catalog Number 381333-395 Catalog Number Identification A typical Catalog Number is shown below with it s elements explained. The example is for a 7000 Series Automatic Transfer Switch, c lass A interrup ting rating, autom atic, open- transition transfer, dual- circuit breaker, 3 pole, 1200 ampere, 6.6 kV 60 Hz, in a Type 1 enclosure. Typical 700 ...
-
Emerson 7000 - page 3
381333-395 Installation 1-1 Installation The ASCO 7000 Series Medium-Voltage Automatic Transfer Switch (ATS) is factory wired and tested. Supporting Structure The supporting foundation for the enclosure must be level and straight. Refer to the applicable enclosure outline drawing included with the transfer switch for all mounting details including ...
-
Emerson 7000 - page 4
2-1 Operation 381333-395 Configuration of Shipped ATS The MV ATS is shipped with the circuit breakers and controls in the following state: ON CB SECTION(S) - Circuit Breakers , check these items ▪ Normal source circuit breaker (CBN) in the OPEN position with the closing spring discha rged. ▪ Emergency source circuit breaker (CBE) in the OPEN po ...
-
Emerson 7000 - page 5
381333-395 Operation 2-2 Controller Settings for MV ATSs The Group 5 Controller is factory set for medium- voltage operation. These are the special settings: Controller Voltage Jumper Blocks The control voltage is typically stepped down to 120V, so the eight jumper blocks are factory arranged horizontally for 120 V input. Controller Menu Settings A ...
-
Emerson 7000 - page 6
2-3 Operation 381333-395 Figure 2-5. 7ATS controls and indicators. ATS Electrical Operation This procedure checks the electrical operation of the automatic transfer switch. See Figure 2-5. Transfer Test Both normal and emergency sources must be available and the emergenc y source generator (if used) must be capable of being started in this procedur ...
-
Emerson 7000 - page 7
381333-395 Operation 2-4 Figure 2-6. 7ACTS controls and indicators. ACTS Electrical Operation This procedure checks the electrical operation of the automatic closed-transition transfer switch. See Figure 2-6. Transfer Test Both normal and emergency sources must be available and the emergenc y source generator (if used) must be capable of being star ...
-
Emerson 7000 - page 8
2-5 Operation 381333-395 Figure 2-7. 7ADTS controls and indicators. ADTS Electrical Operation This procedure checks the electrical operation of the automatic delayed-transition transfer switch. See Figure 2-7. Transfer Test Both normal and emergency sources must be available and the emergenc y source generator (if used) must be capable of being sta ...
-
Emerson 7000 - page 9
381333-395 Troubleshooting 3-1 Troubleshooting for MV ATS Hazardous voltage capable of causing shock, burns, or death is used in the switch. Do not touch the power or load terminal of the transfer switch! Check in Numerical Sequence Problem 1 Operation 2 Gen-Set 3 Voltage on Display Gen-Set does not start when the Transfer Control switch is turned ...
-
Emerson 7000 - page 10
3-2 Troubleshooting 381333-395 Troubleshooting for MV ACTS Hazardous voltage capable of causing shock, burns, or death is used in the switch. Do not touch the power or load terminal of the transfer switch! Check in Numerical Sequence Problem 1 Operation 2 Gen-Set 3 Voltage on Display Gen-Set does not start when the Transfer Control switch is turned ...
-
Emerson 7000 - page 11
381333-395 Troubleshooting 3-3 Troubleshooting for MV ADTS Hazardous voltage capable of causing shock, burns, or death is used in the switch. Do not touch the power or load terminal of the transfer switch! Check in Numerical Sequence Problem 1 Operation 2 Gen-Set 3 Voltage on Display Gen-Set does not start when the Transfer Control switch is turned ...
-
Emerson 7000 - page 12
INDEX 381333-395 Printed in U.S.A. © ASCO Power Technologies, L.P. 2013 All Rights Reserved. A ATS, i, 2-3, 3-1 ATS INFORMATION , screen, 2-2 ACTS, i, 2-4, 3-2 ADTS, i, 2-5, 3-3 Alarm Reset , i. 2-1, 2-2, 3-1, 3-2, 3-3 ASI 800-800-2726(ASCO), customercare@asco.com Auto, Transfer Switch , 2-1 auxiliary circuits, i, 1-1 B batteries, 3-1, 3-2, 3-3 Br ...
Emerson 7000についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもEmerson 7000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがEmerson 7000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。