-
Dolby Laboratories Flat Panel Television - page 1
This TV incorporates High-Definition Multimedia Interface (HDMI TM ) technology . HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential un ...
-
Dolby Laboratories Flat Panel Television - page 2
ENGLISH ENGLISH 1 FCC F eder al Communica tions Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, us ...
-
Dolby Laboratories Flat Panel Television - page 3
2 Warnings and Pr ecautions War nings and Precautions T o reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualified service personnel. This symbol is intended to alert ...
-
Dolby Laboratories Flat Panel Television - page 4
ENGLISH ENGLISH 3 Warnings and Pr ecautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. ▪ Do not touch the power cord and antenna cable during lightning. ▪ Remove the plug from the wall outlet, if the equipme ...
-
Dolby Laboratories Flat Panel Television - page 5
4 Warnings and Pr ecautions Outdoor Antenna Safety Instructions Antenna lead-in wire Antenna discharge unit (NEC section 810-20) Grounding conductors (NEC section 810-20) Gr ound clamps Power service grounding (NEC Art250 part H) Ground clamps Electric service equipment NEC : National Electrical code If an outdoor antenna is connected, follow the p ...
-
Dolby Laboratories Flat Panel Television - page 6
ENGLISH ENGLISH 5 T ABLE OF CONTENTS Feder al Com munic at ion s Comm issi on St ate men t .......................... 1 W arnings and Precautions Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ........................................................ ...
-
Dolby Laboratories Flat Panel Television - page 7
6 Chapter 1 Intr oducing the LCD TV V arious Audio/Video terminals for e xternal equipment connection ▪ 2 sets of composite A/V input terminals ▪ 1 set of S-VIDEO terminals ▪ 2 sets of component Video input terminals ▪ 1 VGA/ Audio input terminals ▪ 2 HDMI/Audio input terminals ▪ 1 set of Audio(L/R) output terminals ▪ 2 SPDIF output t ...
-
Dolby Laboratories Flat Panel Television - page 8
ENGLISH 7 Chapter 1 Intr oducing the LCD TV Make sure all of the above contents are included in the package. If you are missing any items, please contact the Element Electronics customer service department. LCD TV Make sure all of the following contents are included. Power Cord These items are all you need to set up and operate the LCD TV i ...
-
Dolby Laboratories Flat Panel Television - page 9
8 Chapter 1 Intr oducing the LCD TV Setting Up Y our LCD TV How to install the TV Stand Attach the Stand the TV with the bottom foam packaging material still attached. Read all instructions before continuing with the stand installation. a b Stand Shipping box Protective bag T able c. Remove protective bag from LCD unit, but DO NOT remove the bottom ...
-
Dolby Laboratories Flat Panel Television - page 10
ENGLISH 9 Chapter 1 Intr oducing the LCD TV If you prefer to mount your new Element Electronics TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately). Remove the screws of the table stand and detach the table stand from the TV . Soft cloth Align the holes on ...
-
Dolby Laboratories Flat Panel Television - page 11
10 Chapter 1 Intr oducing the LCD TV Do not use caustic cleaner s (porcelain, stainless steel, toilet, or oven c leaner etc .) on the remote , as it may suffer damage . Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT . terminal (refer to page15-17). Connect the AC power cord at the back of the TV and connect ...
-
Dolby Laboratories Flat Panel Television - page 12
IR Infrared Receiver LED The LED light is red when the LCD TV is in standby and the LED light is blue when powered up. Right Side View and Controls MENU Press once to display the OSD (on screen display), press again to turn the OSD off. VOL +/ VOL - Adjusts the volume up and down. Selects the main-menu item and change values for items when in the O ...
-
Dolby Laboratories Flat Panel Television - page 13
HDMI 2 IN HDMI 1 IN AUDIO L R L R L R L R L R L R L R AUDIO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO HDMI2 IN HDMI1 IN VGA IN PC AUDIO IN VIDEO S-VIDEO S-VIDEO IN VIDEO 1 IN COAXIAL TV CABLE/AIR L L R L R R YPbPr1 IN Y ...
-
Dolby Laboratories Flat Panel Television - page 14
ENGLISH 13 Chapter 1 Intr oducing the LCD TV Y our Remote Control S.MODE MTS P . MODE VOL. CH. MUTE INPUT GUIDE EXIT INFO MENU P .SIZE SLEEP CAPTION 3 9 2 1 8 12 T urns the LCD TV on and off. MT S Cycles through the multi-channels TV sound(MTS) options: SAP/MONO/ STEREO S.M OD E Selects sound effect options: Surround/ Live/Dance/T echno/Classic/Sof ...
-
Dolby Laboratories Flat Panel Television - page 15
14 Chapter 2 Installing the L CD TV Ef fective r ange: The r emote can control the L CD TV fr om up to 5m awa y , if pointed directly at the r eceiver . Input Source TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI1) VIDEO7 (HDMI2) COMPUTER(VGA) 13 14 15 16 17 18 GUI DE Displays the Program ...
-
Dolby Laboratories Flat Panel Television - page 16
ENGLISH 15 Chapter 2 Installing the L CD TV Chapter 2 Installing the LCD TV Refer to the owner ’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Antenna Connection The antenna requirements for good color TV recep ...
-
Dolby Laboratories Flat Panel Television - page 17
16 Chapter 2 Installing the L CD TV HDMI2 IN HDMI1 IN VGA IN PC AUDIO IN VIDEO S-VIDEO S-VIDEO IN VIDEO 1 IN COAXIAL TV CABLE/AIR L L R L R R YPbPr1 IN Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO HDMI2 IN HDMI1 IN VGA IN PC AUDIO IN VIDEO S-VIDEO S-VIDEO IN VIDEO 1 IN COAXIAL TV CABLE/AIR L L R L R R YPbPr1 IN Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO OU T I ...
-
Dolby Laboratories Flat Panel Television - page 18
ENGLISH 17 Chapter 2 Installing the L CD TV This reminder is provided to call the CA TV system installer ’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular , specifies that the cable ground shall be connected to the grounding system of the building accurately , or ...
-
Dolby Laboratories Flat Panel Television - page 19
18 Chapter 2 Installing the L CD TV HDMI2 IN HDMI1 IN VGA IN PC AUDIO IN VIDEO S-VIDEO S-VIDEO IN VIDEO 1 IN COAXIAL TV CABLE/AIR L L R L R R YPbPr1 IN Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO HDMI2 IN HDMI1 IN VGA IN PC AUDIO IN VIDEO S-VIDEO S-VIDEO IN VIDEO 1 IN COAXIAL TV CABLE/AIR L L R L R R YPbPr1 IN Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO Us ...
-
Dolby Laboratories Flat Panel Television - page 20
ENGLISH 19 Chapter 2 Installing the L CD TV Press the button on the remote to turn on the LCD TV . Press the OK button to display the received channel list, then press ▲▼ to select a channel. Or , use the ▪ ( Input button) with 0-9 buttons to select digital channel( for example 9.1) The digital main channel might inc lude many subchan ...
-
Dolby Laboratories Flat Panel Television - page 21
METHOD A: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’ s VIDEO2 IN jacks. METHOD B: Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’ s audio inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s S-VIDEO IN input jack. Connect all AC ...
-
Dolby Laboratories Flat Panel Television - page 22
L R VIDEO1 IN VIDEO Right Side ENGLISH 21 Chapter 2 Installing the L CD TV A B HDMI 2 IN HDMI 1 IN AUDIO L R L R L R L R L R L R L R AUDIO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO Rear of TV or AUDIO Cable S-VIDEO Cable ...
-
Dolby Laboratories Flat Panel Television - page 23
22 Chapter 2 Installing the L CD TV C Rear of TV A B HDMI 2 IN HDMI 1 IN AUDIO L R L R L R L R L R L R L R AUDIO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO or METHOD A: Use a composite cable to connect the DVD player ...
-
Dolby Laboratories Flat Panel Television - page 24
ENGLISH 23 Chapter 2 Installing the L CD TV F or best picture quality , if your equipment has component video output, use a component cable instead of a composite video or S-video cable . Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the button on the remote to turn on the ...
-
Dolby Laboratories Flat Panel Television - page 25
24 Chapter 2 Installing the L CD TV Use a component cable to connect the satellite receiver ’s/TV Cable Box’ s component (YPbPr1) output jacks to the LCD TV’ s component input jacks. Use an audio cable to connect the satellite receiver ’s/TV Cable Box’s component audio jacks to the LCD TV’ s audio input jacks. Connect all AC pow ...
-
Dolby Laboratories Flat Panel Television - page 26
ENGLISH 25 Chapter 2 Installing the L CD TV HDMI 2 IN HDMI 1 IN AUDIO L R L R L R L R L R L R L R AUDIO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO Rear of TV Use a HDMI cable to connect the A V equipment’s HDMI outp ...
-
Dolby Laboratories Flat Panel Television - page 27
26 Chapter 2 Installing the L CD TV HDMI 2 IN HDMI 1 IN AUDIO L R L R L R L R L R L R L R AUDIO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO Rear of TV Use a HDMI-to-DVI cable to connect the A V equipment’s DVI output ...
-
Dolby Laboratories Flat Panel Television - page 28
ENGLISH 27 Chapter 3 Using the L CD TV Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’ s. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the button on th ...
-
Dolby Laboratories Flat Panel Television - page 29
28 Chapter 3 Using the L CD TV HDMI 2 IN HDMI 1 IN AUDIO L R L R L R L R L R L R L R AUDIO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV Y Pb Pr AUDIO YPbPr2 IN Y Pb Pr AUDIO Audio Receiver Audio Am p lifier A B Connecting to Audio R eceiver: Use an audio ca ...
-
Dolby Laboratories Flat Panel Television - page 30
ENGLISH 29 Chapter 3 Using the L CD TV Chapter 3 USING THE FEA TURES Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the ASPECT button repeatedly to select the screen format you want. Wide Screen Viewing WIDE Stretches the image vertically and horizontally to ...
-
Dolby Laboratories Flat Panel Television - page 31
30 Chapter 3 Using the L CD TV Using the Program Guide With the LCD TV connected to a television programming source, press the INPU T button on the remote control and use t he ▲▼ buttons to select TV and press the OK button. Press the GUIDE button on the remote control, the Program Guide will appear on the screen: The Program Guide feat ...
-
Dolby Laboratories Flat Panel Television - page 32
ENGLISH 31 Chapter 3 Using the L CD TV Press button to turn the LCD TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄► buttons to select the VID EO . Use the ▲▼ buttons to highlight an individual VIDEO option, use the ◄► buttons to change the setting, and press the ME NU to exit the ...
-
Dolby Laboratories Flat Panel Television - page 33
32 Chapter 3 Using the L CD TV Satur ation Controls the color intensity Hue Controls the difference between the green and red regions of the picture. Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges Color tempera ture Adjusts color components independently to achieve a warm or cool effect: Cool/Middle/W ...
-
Dolby Laboratories Flat Panel Television - page 34
ENGLISH 33 Chapter 3 Using the L CD TV Press button to turn the LCD TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select the AUDIO . Use the ▲▼ buttons to highlight an individual AUDIO option, use the ◄► buttons to change the setting, and press the ME NU t o exit the ...
-
Dolby Laboratories Flat Panel Television - page 35
34 Chapter 3 Using the L CD TV MTS Allows you to listen to high-fidelity stereo sound while watching TV ▪ Stereo : Use separate audio tracks for left and right speakers, if available ▪ SAP: Y ou can enjoy a second audio program from the speakers while watching a scene in the original program ▪ Mono: Allows mono output (useful when stereo is ...
-
Dolby Laboratories Flat Panel Television - page 36
ENGLISH 35 Chapter 3 Using the L CD TV Press button to turn the LCD TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select the TV . Use the ▲▼ buttons to highlight an individual TV option, use the ◄► buttons changes the setting, and press the ME NU exits the menu. ...
-
Dolby Laboratories Flat Panel Television - page 37
36 Chapter 3 Using the L CD TV Press the ▼ button to select the desired channel, and press the OK button repeatedly to select show ( ) or hide( ) Time Zone Allows selection of regional TV systems of USA: Eastern T ime/ Indiana/Central time/Mountain T ime/Arizona/Pacific T ime/Alaska/ Hawaii ...
-
Dolby Laboratories Flat Panel Television - page 38
ENGLISH 37 Chapter 3 Using the L CD TV Press button to turn the LCD TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄► buttons to select the SE T UP . Use the ▲▼ buttons to highlight an individual SETUP option, use the ◄► buttons to change the setting, and press the ME NU t o exit th ...
-
Dolby Laboratories Flat Panel Television - page 39
38 Chapter 3 Using the L CD TV Analog Cloaed Caption Off Digital Cloaed Caption Off Digital Caption Style Closed Caption Allows to select from analog or digital closed caption modes and press the OK button. The Closed Caption list appears: Analog Closed Caption : Press the ◄ ► buttons to select the basic analog closed caption options: ▪ C ...
-
Dolby Laboratories Flat Panel Television - page 40
ENGLISH 39 Chapter 3 Using the L CD TV P arental The Parental Control can be set up to the TV to block Channel, Video Source and to change password. Use the ▼ button to select the Paren t al , and press the OK to display the Parental menu Use the Prog ra m Bl ock function, must enter a four-digit password. The factory password is 0000 ...
-
Dolby Laboratories Flat Panel Television - page 41
40 Chapter 3 Using the L CD TV 1 TV(CABLE/AIR) 2 VIDEO1 (SIDE) 3 VIDEO2 (REAR) 4 VIDEO3 (S-VIDEO) 5 VIDEO4 (YPbPr1) 6 VIDEO5 (YPbPr2) 7 VIDEO6 (HDMI1) 8 VIDEO7 (HDMI2) 9 COMPUTER(VGA) Input Bloc k Selects to block a Input source signal Press the ▲▼ buttons to select the input source. Press the OK button repeatedly to select BLOCK or ...
-
Dolby Laboratories Flat Panel Television - page 42
ENGLISH 41 Chapter 3 Using the L CD TV Progr am Block Channel Block Input Block Open V-Chip Change Pass word Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select the SE T UP . Use the ▼ buttons to highlight Parental , and press the OK button. Using the Parental Block Settings Use ...
-
Dolby Laboratories Flat Panel Television - page 43
42 Chapter 3 Using the L CD TV The P arental bloc k menu includes the following options: U .S. TV Ra tings Selects to activate the TV Rating programs. U .S. Movie R atings Selects to activate the MP AA Rating programs Canadian English Ratings Selects to activate the English Rating programs of Canada. Canadian Fr ench Ra tings Selects to activat ...
-
Dolby Laboratories Flat Panel Television - page 44
ENGLISH 43 Chapter 3 Using the L CD TV CONTENT -BASED FV D L S V AGE-B ASED TV -Y TV -Y7 TV -G TV -PG TV -14 TV -MA : T o block programs by both content and age. The U.S . T V Ra tin g has 2 r atin g met ho ds: Co ntent - Ba sed R ati ng an d Age - Base d Rat ing . The U.S. T V R ati ng includes the ...
-
Dolby Laboratories Flat Panel Television - page 45
44 Chapter 3 Using the L CD TV The Canadian Englsh Ratings includes the following options: RATING DESCR IP TI ON G All children C 8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older 18+ Adult programming Canadian English Ratings Use the ◄► ▲▼ buttons to select the rating you want and press the O ...
-
Dolby Laboratories Flat Panel Television - page 46
ENGLISH 45 Chapter 3 Using the L CD TV The U.S. Movie Ratings is used for original movies rated by the Motion Picture Association of America(MP AA) as broadcasted on cable TV and not edited for television. The U.S. Movie Ratings includes the following options: RATING DESCR IP TI ON G General Audiences. Movie is appropriate for all ages PG Parental ...
-
Dolby Laboratories Flat Panel Television - page 47
46 Specifications SPECIFICA TIONS LCD Panel Panel Size 40” TFT LCD 42” TFT LCD Brightness 500 500 Contrast Ratio 800:1 1500:1 Max. Resolution 1366x768 1920x1080 Input Connector VIDEO 2 2 S-VIDEO 1 1 YPbPr 2 2 AUDIO IN(L/R) 1 1 VGA/ PC audio in 1 1 HDMI 2 2 HEADPHONE 1 1 OPTICAL/COAXIAL 1 1 VHF/UHF IN 1 1 Power Source AC100~240V , 50/60Hz, 4.0A ...
Dolby Laboratories Flat Panel Televisionについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもDolby Laboratories Flat Panel Televisionの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがDolby Laboratories Flat Panel Televisionで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。