Pelco ED2620の取扱説明書

20ページ 0.23 mb
ダウンロード

ページに移動 of 20

Summary
  • Pelco ED2620 - page 1

    ED25/ED2500/ED2620/ED27 Series Envir onmental Domes Installation/Operation Manual C437M-B (9/95) ® PELCO • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.pelco.com (800) 289-9100 or (1-559) 292-1981 • FAX (800) 289-9150 or (1-559) 292-3827 ...

  • Pelco ED2620 - page 2

    TABLE OF CONTENTS Section Page 1.0 WARNINGS ....................................................................................................................................... 1 2.0 SCOPE ............................................................................................................................................... 2 2.1 DESCRIPT ...

  • Pelco ED2620 - page 3

    PELCO Manual C437M-B (9/95) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 4 . Only use replacement parts recommended by PELCO. 5 . After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed ...

  • Pelco ED2620 - page 4

    2 PELCO Manual C437M-B (9/95) ED25/26 Series ED27 Series 2.0 SCOPE The information contained in this manual covers the ED25/ED2520/ED2620/ED27/ED2720 Series Environ- mental Domes. 2.1 DESCRIPTION The ED25/ED2520/ED2620/ED27/ED2720 Series of environmental domes have been designed primarily for outdoor applications, but also can be used indoors. The ...

  • Pelco ED2620 - page 5

    PELCO Manual C437M-B (9/95) 3 3.0 INST ALLA TION CAUTION: Make certain that the mounting surface is capable of supporting the full load of the mount, pan/tilt, camera/lens and enclosure • Handle the lower dome with care so as not to scratch or get fingerprints on the viewing window . • When installing the unit, loosen the two (2) fas- teners an ...

  • Pelco ED2620 - page 6

    4 PELCO Manual C437M-B (9/95) 3.1.2 PMED25 Pendant Mount Installation T o mount the enclosure using the PMED25 pendant mount, perform the following steps. Refer to Figure 3. 1. Screw the PMED25 pendant mount to a suitable length of 1-1/2-inch MNPT threaded pipe which has been securely fastened to a surface capable of supporting the weight of the do ...

  • Pelco ED2620 - page 7

    PELCO Manual C437M-B (9/95) 5 3.3.2 Conductor Requirements The ED25/ED2520/ED27 Series environmental domes can be connected by a “hard-wire” system, Coaxitron or W iretron system. The ED2620 Series dome is de- signed for hard-wire applications only . The distances for each of these system is as follows: Hard-wire Systems Coaxitron System Wiretr ...

  • Pelco ED2620 - page 8

    6 PELCO Manual C437M-B (9/95) Figure 5 . ED2520/ED2720 Series Receiver/Driver Wiring Diagram ...

  • Pelco ED2620 - page 9

    PELCO Manual C437M-B (9/95) 7 Figure 6 . Wiring Diagram for ED2620/ED2620-SL Dome Drives ED2620/ED2620-SL Pan/Tilt Wiring Diagram Qty Sym Description Part Number 1 C1 Capacitor, 15 MFD 100 V CAPU0015.0/100N 1 C2 Capacitor, 15 MFD 100V CAPU0015.0/100N 1 M1 Pan Motor PT350010010 1 M2 Tilt Motor 2508001 1 J2 Connector CONMAB6100 14 – Connector Pins ...

  • Pelco ED2620 - page 10

    8 PELCO Manual C437M-B (9/95) Figure 8 . Wiring Diagram for ED2520-SL/ED2720-SL Dome Drives Figure 7 . Wiring Diagram for ED2520/ED2720 Dome Drives ...

  • Pelco ED2620 - page 11

    PELCO Manual C437M-B (9/95) 9 Figure 10 . Wiring Diagram ED2520SL-PP/ED2720SL-PP Dome Drives Figure 9 . Wiring Diagram for ED2520-PP/ED2720-PP Dome Drives ...

  • Pelco ED2620 - page 12

    10 PELCO Manual C437M-B (9/95) 3.3.3 Video Synchr onization, Alarm T er minal Diagram The following wiring diagram illustrates the configu- ration of an additional four-position and six-position alarm terminal strip and additional video synchroniza- tion connection. These terminal strips are factory in- stalled as standard features on ED2520RX-PP , ...

  • Pelco ED2620 - page 13

    PELCO Manual C437M-B (9/95) 11 4.0 P AN/TIL T LIMIT ADJUSTMENTS CAUTION: DO NOT attempt to adjust limit stops when the pan/tilt is in operation. Damage to the equipment can result. Do not operate equipment without limit stops. T o adjust limit stops, perform the following steps: 1. Pan to the right using the joystick control until the desired pan l ...

  • Pelco ED2620 - page 14

    12 PELCO Manual C437M-B (9/95) 6.0 SERVICE AND REP AIR 6.1 RECOMMENDED EQUIPMENT AND TOOLS 1. V oltmeter or ohmmeter 2. Allen wrench set 3. W rench set 4. Screwdriver 5. Pliers, long nose 6.2 SERVICE TIPS Some common problems encountered with pan/tilt sys- tems include mis-wiring, overloading, and not using the units for the correct application. Sh ...

  • Pelco ED2620 - page 15

    PELCO Manual C437M-B (9/95) 13 Figure 14 . ED25/ED26/ED27 Series Enclosure Exploded Assembly Diagram 7.0 EXPLODED ASSEMBL Y DIAGRAM ...

  • Pelco ED2620 - page 16

    14 PELCO Manual C437M-B (9/95) 8.0 MECHANICAL P AR TS LIST The following parts list corresponds to the exploded assembly diagram in Figure 14. Item Quantity Description Part Number 1 1 Enclosure front plate assembly ED25001003ASSY 2 1 Lower shock mount ED25004005COMP 3 2 Closing fasteners ED2510000 4, 8 8 Nylon washer SB310005 5 1 Dome ED254004COMP ...

  • Pelco ED2620 - page 17

    PELCO Manual C437M-B (9/95) 15 10.0 MODELS ED25 14" diameter environmental dome fixed camera mount. Black opaque lower dome has smoked viewing win- dow (1 f-stop light loss). (CE) ED25-1 Same as ED25 except supplied with service light and heater/blower. ED2520 14" diameter environmental dome with black opaque lower dome with smoked viewin ...

  • Pelco ED2620 - page 18

    16 PELCO Manual C437M-B (9/95) Enclosure The following specifications apply to these models: ED25-1, ED2520, ED2520-SL, ED2520-PP, ED2520SL-PP, ED2620, ED2620-SL, ED27-1, ED2720, ED2720-SL, ED2720SL-PP Input Voltage: 120 VAC, 50/60 Hz vA Required: 187 vA Blower: 80 cfm at 13 watts (continuous operation) Heate rs: Four (4) at40 watts each. Heaters a ...

  • Pelco ED2620 - page 19

    PELCO Manual C437M-B (9/95) 17 GENERAL Enclosure Max. Camera/Lens Length: 12.50"L x 4.50"W x 3.25"H (31.75cm x 11.43cm x 8.25cm) Construction: Back Box 0.080" aluminum Viewing Window Optically clear acrylic which has been tinted, rated UL94HB. (Less than 1 f-stop light loss.) Finish: Semigloss beige, self-textured baked enamel E ...

  • Pelco ED2620 - page 20

    18 PELCO Manual C437M-B (9/95) 12.0 WARRANTY AND RETURN INFORMATION This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycl ing t ...

メーカー Pelco カテゴリー Security Camera

Pelco ED2620のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ED2620の取扱説明書
- Pelcoの製品カード
- パンフレット
- またはPelco ED2620の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Pelco ED2620の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Pelco ED2620の取り付け説明書、サービスマニュアル、簡易説明書、またはPelco ED2620のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Pelco ED2620の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Pelco ED2620デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPelco ED2620を使用するのを助ける技術的文書のことです。説明書は通常、全てのPelco ED2620ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Pelcoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Pelco ED2620の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPelco ED2620の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Pelco ED2620に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Pelco ED2620デバイスの基本機能を使うにあたってのヒント。 Pelco ED2620のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Pelco ED2620に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPelco ED2620のメーカー/サービスへの連絡先に関する情報。

Pelco ED2620についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPelco ED2620の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPelco ED2620で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)