Hobart HFO15 ML-135558の取扱説明書

28ページ 0.93 mb
ダウンロード

ページに移動 of 28

Summary
  • Hobart HFO15 ML-135558 - page 1

    MODEL HFD/HFC SERIES ELECTRIC FRYERS MODELS HFD50 ML-135551 HFD85 ML-135553 HFC50 ML-135555 HFC85 ML-135558 HFO15 ML-135558 HFO21 ML-135559 FORM 35612 (08-03) 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 ...

  • Hobart HFO15 ML-135558 - page 2

    — 2 — TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Unpacking ...

  • Hobart HFO15 ML-135558 - page 3

    — 3 — Installation, Operation and Care of MODEL HFD/HFC SERIES ELECTRIC FRYERS SAVE THESE INSTRUCTIONS FOR FUTURE USE GENERAL Hobart HFD/HFC Series Electric Fryers are available in 2 sizes with an array of features and options for a range of commercial fryer applications. Width Fry Compound Model KW Inches / cm Lb / kg HFD/HFC50 17 15 1 / 2 / 3 ...

  • Hobart HFO15 ML-135558 - page 4

    — 4 — HF Series Fryer — Construction Features Model Filter Ready Battery Battery Configuration Interplumbing HFD50/HFC50 Opt. (Use HMF50) Opt. Opt. HFD85/HFC85 Opt. (Use HMF85) Opt. Opt. Model Fat Melt Thermostat Basket Lift(s) Basket(s) Cycle Twin Single Tri HFD50 Std. Solid State Opt. Std. Opt. N/A HFD85 Digital Display Std. Opt. Opt. HFC50 ...

  • Hobart HFO15 ML-135558 - page 5

    — 5 — HFO Series Frymate — Finish Options Model HFO15, HFO21 Front Door Legs Standard Stainless Steel Stainless Steel Legs Optional Not Applicable Casters * Model HFO15 is for use with the HF50 Series Fryers. Model HFO21 is for use with the HF85 Series Fryers. HFO Series Frymate — Features Tops Heat Lamp Drain Solid Pan Solid Pan Perforated ...

  • Hobart HFO15 ML-135558 - page 6

    — 6 — INSTALLATION Before installing the fryer, verify that the electrical service agrees with the specifications on the fryer data plate which is located on the inside of the door panel. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer or Hobart Corporation immediately. UNPACKING ...

  • Hobart HFO15 ML-135558 - page 7

    — 7 — Fig. 1 LEVELING Place a carpenter's level on top of the fryer and level the fryer front-to-back and side-to-side by turning the adjustable legs or casters. ELECTRICAL CONNECTIONS WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL CODES. WARNING: DISCONNECT THE ELECTRICAL POW ...

  • Hobart HFO15 ML-135558 - page 8

    — 8 — OPERATION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. BEFORE FIRST USE Clean the Fryer and Heating Elements Do not operate fryer without frying compo ...

  • Hobart HFO15 ML-135558 - page 9

    — 9 — ADDING SOLID SHORTENING If replacing shortening, place the block of shortening in the room with the fryer for 1 to 2 hours before using. This will soften the shortening and make it easier to divide. CAUTION: Failure to remove crumb screens prior to addition of fresh shortening may cause heating elements to overheat, allowing shortening to ...

  • Hobart HFO15 ML-135558 - page 10

    — 10 — CONTROLS — Control Guide HFD SERIES (MANUFACTURED AFTER AUGUST 2003 WITH TDI CONTROLLERS) — Power switch; for turning the fryer on or off. — For cleaning purposes when the fryer is filled with water. Temperature is maintained at approxmiately 192°F (89°C).** — For entering and exiting the program mode. For scrolling through pro ...

  • Hobart HFO15 ML-135558 - page 11

    — 11 — PARAM ETER SELECT DISPLAY SCROLL Left Timer P re ss or to en ter ti me . LED is lit above the left ba sket icon . The ti me val ue is di splay ed in window. Pr es s a nd scroll to next item . Right Timer Pr es s o r to en te r t i me . LED is lit ab ove the right bas k et icon . The ti me val ue is di splay ed in window. Pr es s a nd scr ...

  • Hobart HFO15 ML-135558 - page 12

    — 12 — Melt Options (HFD Series) When using solid shortening in the fryer, the CY S (solid shortening) option must be used. Solid shortening must be gently warmed to a liquid state before heating to frying temperatures. Melting solid shortening without using this option will damage the fry tank and scorch the shortening. The controller has thre ...

  • Hobart HFO15 ML-135558 - page 13

    — 13 — USING THE FRYER (After Startup) Models Without Basket Lift Option 1. Load the fry basket(s); do not overfill. 2. Carefully lower basket(s) into shortening. 3. Press to start the left timer. Press to start the right timer. 4. When the timer times out, a beeper sounds. Press to silence the left timer beeper. Press to silence the right time ...

  • Hobart HFO15 ML-135558 - page 14

    — 14 — Control Guide CONTROLS — HFC SERIES (MANUFACTURED AFTER AUGUST 2003 WITH TDI CONTROLLERS) — Power switch; for turning the fryer on or off. — For setting fry temperature. For viewing shortening temperature and set temperature. — For entering and exiting the program mode. — For selecting program parameters. For setting timers 1 t ...

  • Hobart HFO15 ML-135558 - page 15

    — 15 — PARAMETER STEPS LEFT DISPLAY RIGHT DISPLAY Press SELECT OPTIONS Press DEGREES F or C F or C Press to select Fahrenheit or Celsius. DEGREES F or C F or C Press when complete. PROGRAM Press SELECT OPTIONS Press SET PASS NEW PASS Press to select NO PASS. NO PASS NEW PASS Press when complete. PROGRAM Press SELECT OPTIONS Press SET PASS NEW P ...

  • Hobart HFO15 ML-135558 - page 16

    — 16 — PARAMETER STEPS LEFT DISPLAY RIGHT DISPLAY Press SELECT OPTIONS Press ENGLISH (Factory Default) LANGUAGE Press to select a language. ENGLISH/ESPANOL FRANCAIS/DEUTSCH HOLLAND Press when complete. PROGRAM Press SELECT OPTIONS Press NO MELT/LIQUID/SOLID Press to select melt options. NO MELT/LIQUID/SOLID Press when complete. PROGRAM Press SE ...

  • Hobart HFO15 ML-135558 - page 17

    — 17 — Melt Options (HFC Series) When using solid shortening in the fryer, the SOLID melt option must be used. Solid shortening must be gently warmed to a liquid state before heating to frying temperatures. Melting solid shortening without using this option will damage the heating elements and scorch the shortening. The controller has three opt ...

  • Hobart HFO15 ML-135558 - page 18

    — 18 — TEMPERATURE AND TIME PROGRAMMING Temperature 1. Press to enter program mode. PROGRAM is displayed in the window. 2. Press to enter temperature mode. 000°F and TEMP are displayed in the window. 3. Press through to enter desired fry temperature. The fry temperature is displayed in the window. 4. Press to exit the temperature mode. Press a ...

  • Hobart HFO15 ML-135558 - page 19

    — 19 — Setting Advanced Time Features 1. Press and enter the program mode. 2. Press for timers through , or press for timers through . The LEDs are lit on the timers available for programming, and SELECT PRODUCT is displayed in the window. 3. Select a timer; the programmed time is displayed in the window. A. Duty Time : 1) Press either arrow on ...

  • Hobart HFO15 ML-135558 - page 20

    — 20 — USING THE FRYER (After Startup) Models Without Basket Lift Option 1. Load the fry basket(s), do not overfill. 2. Carefully lower basket(s) into shortening. 3. Press the desired number to select the product to be timed. Timers through are programmed for products. Once the product is selected, select or button to start timing of the produc ...

  • Hobart HFO15 ML-135558 - page 21

    — 21 — FRYING (All Models) Heat shortening to set temperature. Pieces of product to be fried should be about the same size to ensure the same doneness. Drain or wipe dry raw or wet foods to minimize splatter when lowering into the hot oil. Do not overfill baskets. Recommended maximum capacities are: Lb / kg of Total Lb / kg Total Lb / kg Produc ...

  • Hobart HFO15 ML-135558 - page 22

    — 22 — DAILY FILTERING Fryers Without Filter Ready Options Turn power switch off when draining or filling. Always filter the shortening while liquified. A cold fryer will not drain properly because the shortening under the cold zone tube area will remain hard, even if the heat is on for a few minutes. If necessary, the clean-out rod may be used ...

  • Hobart HFO15 ML-135558 - page 23

    — 23 — CLEANING (All Models) WARNING: DISCONNECT THE ELECTRICAL POWER SUPPLY TO THE MACHINE AND FOLLOW LOCKOUT/TAGOUT PROCEDURES. Daily Clean the exterior of your fryer regularly with a damp cloth and polish with a soft dry cloth. If regular cleaning is neglected, grease will be burned on and discolorations may form. These may be removed by was ...

  • Hobart HFO15 ML-135558 - page 24

    — 24 — CLEANING (CONTINUED) Weekly or as Required 1. Once the shortening has been drained, flush out scraps and sediment with a small amount of warm shortening. Allow the tank to drain thoroughly. 2. Close the drain valve and fill the tank with a non-corrosive, grease-dissolving commercial cleaner, following the manufacturer's instructions ...

  • Hobart HFO15 ML-135558 - page 25

    — 25 — TROUBLESHOOTING ALARMS AND ERROR MESSAGES O pen Probe - If an open probe is detected, the heat demand is disabled and any running cooking cycles are cancelled. All operator buttons are disabled. The control displays the following message: HFD Models - Prob HFC Models - OPEN PROBE The alarm sounds continuously until the fault clears or th ...

  • Hobart HFO15 ML-135558 - page 26

    — 26 — MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. LUBRICATION Motors used on basketlifts are permanently lubricated. SERVICE AND PARTS INFORMA ...

  • Hobart HFO15 ML-135558 - page 27

    — 27 — NOTES ...

  • Hobart HFO15 ML-135558 - page 28

    — 28 — FORM 35612 (08-03) PRINTED IN U.S.A. NOTES ...

メーカー Hobart カテゴリー Fryer

Hobart HFO15 ML-135558のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HFO15 ML-135558の取扱説明書
- Hobartの製品カード
- パンフレット
- またはHobart HFO15 ML-135558の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Hobart HFO15 ML-135558の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Hobart HFO15 ML-135558の取り付け説明書、サービスマニュアル、簡易説明書、またはHobart HFO15 ML-135558のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Hobart HFO15 ML-135558の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Hobart HFO15 ML-135558デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHobart HFO15 ML-135558を使用するのを助ける技術的文書のことです。説明書は通常、全てのHobart HFO15 ML-135558ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Hobartの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Hobart HFO15 ML-135558の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHobart HFO15 ML-135558の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Hobart HFO15 ML-135558に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Hobart HFO15 ML-135558デバイスの基本機能を使うにあたってのヒント。 Hobart HFO15 ML-135558のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Hobart HFO15 ML-135558に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHobart HFO15 ML-135558のメーカー/サービスへの連絡先に関する情報。

Hobart HFO15 ML-135558についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHobart HFO15 ML-135558の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHobart HFO15 ML-135558で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)