ページに移動 of 114
LVT1364-006B [US] MICR O COMPONENT SYSTEM INSTR UCTIONS English UX-G4 UX-G3 –Consists of CA-UXG4 and SP-UXG4 –Consists of CA-UXG3 and SP-UXG3 Cover_UXG4G3[US] 05.5.16, 5:30 PM 1 ...
G-1 W arnings, Cautions and Other s CA UTION— (ST ANDBY/ON) b utton! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY lamp lights red. • When the unit is turned on, the ST ANDBY ...
G-2 IMPOR T ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user serviceable par ts inside the unit; leav e all servicing to qualified service personnel. 3. CA UTION: Visib le and invisible laser r adiation when open and interlock f ailed or defeated. Av oid direct e xposure to beam. 4. REPR OD ...
1 English Power sources •W hen unplugging the unit from the wall outlet, al ways pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room. • In a damp room. • If the unit is ...
2 English Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started ............................................................ ...
3 English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX PUSH OPEN T APE FM/AM AUX VOLUME + – AUTO REVERSE REC 4 5 6 7 8 p 9 q w e r t MICRO COMPONENT SYSTEM T op view F ...
4 English Display window Display window 1 D AIL Y 1/2/3 (timer number) indicator 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) indicator 6 SLEEP indicator 7 SNOOZE indicator 8 FM mode indicators • MONO , ST (stereo) 9 MP3 indicator p SOUND indicator q BASS indicator w REC (rec ...
5 English Remote Control See pages in parentheses for details. When using the remote control, point it at the remote sensor on the front panel. 1 ST ANDBY/ON button (9, 21) 2 SLEEP button (22) 3 CLOCK/TIMER button (9, 20) 4 SET button (9, 16, 20, 21) 5 CANCEL button (20, 21) 6 Source buttons • CD 3¥8 , T APE 2 3 , FM/AM, A UX Pr essing one of th ...
6 English Getting Started Connecting Speakers Y ou can connect the speakers using the speaker cords. 1 Hold the clamp of the speaker terminal. 2 Insert the end of the speaker cord into the terminal. Match the polarity of the speaker terminals: red cord to ª and black cord to · . 3 Release y our f inger from the clamp. IMPORT ANT : • Use only sp ...
7 English Connecting Other Equipment To connect an audio equipment Y ou can connect audio equipment—used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete. F or pla ying other equipment through this unit, connect between the audio output jacks ...
8 English 1 2 3 R03(UM-4)/AAA(24F) Putting the Batteries into the Remote Control Insert the batteries—R03(UM-4)/AAA(24F)—into the remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same t ...
9 English Common Operations Setting the Clock Before operating the unit any further , f irst set the unit’ s clock. When you plug in the po wer cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode. On the r emote control ONL Y : 1 Pr ess CLOCK/TIMER. The hour indication star ...
10 English Selecting the Source To select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . To operate the CD play er , see pages 11 to 14. To operate the tape deck, see page 15. To operate the tuner (FM or AM), see pages 16 and 17. To recor d on a tape, see pages 18 and 19. ...
11 English Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. •Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently . 4 Press CD 6 . The unit automatically turns on and the source changes to the CD player . After ...
12 English To remo ve the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, f or e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start. • If no disc is inserted “NO DISC” app ...
13 English PROGRAM PRESET GROUP PRESET GROUP UP DOWN REPEA T Canceled ALL Repeat indicators ALL ALL GR. Canceled PROGRAM 5 Pr ess CD 3 / 8 . The tracks are played in the order you ha ve programed. When you f inished pro gramming the 60th track “FULL” will appear on the display . To stop playing, press 7 . To check the program contents Y ou can ...
14 English REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing. On the r emote control ONL Y : Press REMAIN r epeatedly . When playing bac k audio CD: • Each time you press the button, the displa y changes as follo ws, and ...
15 English If no cassette is inserted when y ou press T APE ¤ ‹ “NO T APE” appears on the display . To stop playing, press 7 . To f ast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display . To remo ve the cassette, press PUSH OPEN on ...
16 English T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you press the button, the band alter nates between FM and AM. • If the station pre viously selected is stored in a preset number , the preset n ...
17 English 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN 3 Pr ess PRESET GROUP or PRESET GROUP to select a preset n umber , then press SET . The preset station is stored in memory . •E v en if you do not press SET , the station will automatically be stored on the selected preset number 5 seconds later . Y ou can also use the number ...
18 English 3 Start playing the source—FM, AM, or auxiliary equipment connected to A UX jack. •W hen the source is FM or AM, tune in to the station you w ant to record. • When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 19. 4 Press REC (r ecording). • The REC indicator appears and 3 indicator lights ...
19 English To stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume r ecording, press T APE ¤ ‹ . To stop recording , press 7 . The recording stops and the CD playback is paused. To record on both sides—Reverse Mode On the r emote control ONL Y : Press REV .MODE (re v erse mode) re peatedly unt ...
20 English Using the T imers There are four timers a vailable—Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f. How the Timer actually works Whe ...
21 English PRESET GROUP UP DOWN PRESET GROUP TUNER TAPE CD SET DAIL Y 1 To deactiv ate the timer , press and hold D AIL Y TIMER/SNOOZE repeatedly until (timer) and D AIL Y 1 , 2 , 3 or REC indicators go of f from the display . To change the timer , repeat steps 1 to 6 on pages 20 and this page. •T o acti v ate the Daily T imer again without chang ...
22 English Using Sleep T imer W ith Sleep T imer, you can fall aslee p to your fav orite music or radio program. •Y ou can set Sleep T imer only when the unit is turned on. •Y ou can also turn of f the unit automatically by using Auto Standby . (See page 9.) How the Sleep Timer actually works The unit automatically turns off after the specif ie ...
23 English Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. Cleaning the unit • Stains on the unit Sh ...
24 English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the pr oblem from the hints giv en here, or the unit has been physically damaged, call a qualif ied person, such as your dealer for service. Tr oubleshooting Symptom Power does not come on. No sound is hear ...
EN, CS 0405NYMMDWORI © 2005 Victor Company Of Japan, Limited AC 110-127V VOL TAGE SELECTOR AC 220-240V AC 110-127V VOL T AGE SELECTOR AC 220-240V Mains (A C) Line Instruction (not applicable f or Eur ope, U .S.A., Canada, A ustralia, and U .K.) IMPORTANT for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds ...
LVT1364-012A [UB] MICR O COMPONENT SYSTEM INSTR UCTIONS English UX-G4 UX-G3 –Consists of CA-UXG4 and SP-UXG4 –Consists of CA-UXG3 and SP-UXG3 Cover_UXG4G3[US] 05.5.26, 10:16 AM 1 ...
G-1 W arnings, Cautions and Other s CA UTION— (ST ANDBY/ON) b utton! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY lamp lights red. • When the unit is turned on, the ST ANDBY ...
G-2 IMPOR T ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user serviceable par ts inside the unit; leav e all servicing to qualified service personnel. 3. CA UTION: Visib le and invisible laser r adiation when open and interlock f ailed or defeated. Av oid direct e xposure to beam. 4. REPR OD ...
1 English Power sources •W hen unplugging the unit from the wall outlet, al ways pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room. • In a damp room. • If the unit is ...
2 English Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started ............................................................ ...
3 English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 T op view Front view COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX PUSH OPEN T APE FM/AM AUX VOLUME + – AUTO REVERSE REC 4 5 6 7 8 p 9 q w e r t MICRO COMPONE ...
4 English Display window Display window 1 D AIL Y 1/2/3 (timer number) indicator 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) indicator 6 SLEEP indicator 7 SNOOZE indicator 8 FM mode indicators • MONO , ST (stereo) 9 MP3 indicator p SOUND indicator q BASS indicator w REC (rec ...
5 English Remote Control See pages in parentheses for details. When using the remote control, point it at the remote sensor on the front panel. ST ANDBY/ON SLEEP 123 456 78 0 9 CLOCK /TIMER PRESET GROUP UP DOWN PRESET GROUP SET CANCEL CD RANDOM T APE PROGRAM FM/AM REPEA T AUX O VER REMAIN SOUND/HBS BEA T CUT REV .MODE F ADE MUTING V OLUME DISPLA Y ...
6 English Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately . Connecting AM and FM Antennas 1 Connect the ...
7 English Connecting Other Equipment To connect an audio equipment Y ou can connect audio equipment—used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete. F or pla ying other equipment through this unit, connect between the audio output jacks ...
8 English 1 2 3 R03(UM-4)/AAA(24F) Putting the Batteries into the Remote Control Insert the batteries—R03(UM-4)/AAA(24F)—into the remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same t ...
9 English Common Operations Setting the Clock Before operating the unit any further , f irst set the unit’ s clock. When you plug in the po wer cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode. On the r emote control ONL Y : 1 Pr ess CLOCK/TIMER. The hour indication star ...
10 English Selecting the Source To select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . To operate the CD play er , see pages 11 to 14. To operate the tape deck, see page 15. To operate the tuner (FM or AM), see pages 16 and 17. To recor d on a tape, see pages 18 and 19. ...
11 English Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. •Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently . 4 Press CD 6 . The unit automatically turns on and the source changes to the CD player . After ...
12 English To remo ve the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, f or e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start. • If no disc is inserted “NO DISC” app ...
13 English PROGRAM PRESET GROUP PRESET GROUP UP DOWN REPEA T Canceled ALL Repeat indicators ALL ALL GR. Canceled PROGRAM 5 Pr ess CD 3 / 8 . The tracks are played in the order you ha ve programed. When you f inished pro gramming the 60th track “FULL” will appear on the display . To stop playing, press 7 . To check the program contents Y ou can ...
14 English REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing. On the r emote control ONL Y : Press REMAIN r epeatedly . When playing bac k audio CD: • Each time you press the button, the display changes as follo ws, and t ...
15 English If no cassette is inserted when y ou press T APE ¤ ‹ “NO T APE” appears on the display . To stop playing, press 7 . To f ast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display . To remo ve the cassette, press PUSH OPEN on ...
16 English Listening to FM and AM Broadcasts Presetting Stations Y ou can preset 30 FM and 10 AM stations manually . In some cases, test frequencies hav e been already stored for the tuner since the factory e xamined the tuner preset function before shipment. This is not a malfunction. Y ou can preset the stations you want into memory by following ...
17 English 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN Listening to the External Equipment Y ou can listen to the external equipment such as MD recorder , cassette deck, or other auxiliary . •F irst, make sure that the external equipment is properly connected to the unit. (See page 7.) 1 Set the volume le vel to the minimum positi ...
18 English 3 Start playing the source—FM, AM, or auxiliary equipment connected to A UX jack. •W hen the source is FM or AM, tune in to the station you w ant to record. • When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 19. 4 Press REC (r ecording). • The REC indicator appears and 3 indicator lights ...
19 English To stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume r ecording, press T APE ¤ ‹ . To stop recording , press 7 . The recording stops and the CD playback is paused. To record on both sides—Reverse Mode On the r emote control ONL Y : Press REV .MODE (re v erse mode) re peatedly unt ...
20 English Using the T imers There are four timers a vailable—Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f. How the Timer actually works Whe ...
21 English PRESET GROUP UP DOWN PRESET GROUP TUNER TAPE CD SET DAIL Y 1 To deactiv ate the timer , press and hold D AIL Y TIMER/SNOOZE repeatedly until (timer) and D AIL Y 1 , 2 , 3 or REC indicators go of f from the display . To change the timer , repeat steps 1 to 6 on pages 20 and this page. •T o acti v ate the Daily T imer again without chang ...
22 English Using Sleep T imer W ith Sleep T imer, you can fall aslee p to your fav orite music or radio program. •Y ou can set Sleep T imer only when the unit is turned on. •Y ou can also turn of f the unit automatically by using Auto Standby . (See page 9.) How the Sleep Timer actually works The unit automatically turns off after the specif ie ...
23 English Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. Cleaning the unit • Stains on the unit Sh ...
24 English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the pr oblem from the hints giv en here, or the unit has been physically damaged, call a qualif ied person, such as your dealer for service. Tr oubleshooting Symptom Power does not come on. No sound is hear ...
EN, CS 0605NYMMDWORI © 2005 Victor Company Of Japan, Limited AC 110-127V VOL TAGE SELECTOR AC 220-240V AC 110-127V VOL T AGE SELECTOR AC 220-240V Mains (A C) Line Instruction (not applicable f or Eur ope, U .S.A., Canada, A ustralia, and U .K.) IMPORTANT for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds ...
LVT1364-009A [UW] MICR O COMPONENT SYSTEM SISTEMAS DE MICR OCOMPONENTES SISTEMA DE MICR O COMPONENTES UX-G4 UX-G3 –Consists of CA-UXG4 and SP-UXG4 –Consists of CA-UXG3 and SP-UXG3 INSTR UCTIONS MANU AL DE INSTRUCCIONES INSTRUÇÕES English Español Português ¡ATENCION! Antes de operar su equipo, lea cuidadosamente este instructivo. UXG4G3[UW] ...
G-1 W arnings, Cautions and Other s A visos, precauciones y otras notas Ad ver tências, precauções e outras notas CA UTION— (ST ANDBY/ON) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on stan ...
G-2 CA UTION • Do not bloc k the ventilation openings or holes. (If the ventilation openings or holes are b lock ed by a newspaper or cloth, etc., the heat ma y not be able to get out.) • Do not place any nak ed flame sources, such as lighted candles, on the apparatus . • When discarding batteries, environmental problems m ust be considered a ...
G-3 Front vie w Vista fr ontal Vista fr ontal CA UTION: Pr oper Ventilation To av oid risk of electric shock and fire, and to pre vent damage , locate the apparatus as follo ws: 1F ront: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown b y the dimensions below . 3 Bottom: Place on the lev el ...
G-4 IMPORT ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user serviceable par ts inside the unit; leav e all servicing to qualified service personnel. 3. CA UTION: Visib le and invisible laser r adiation when open and interlock f ailed or defeated. Av oid direct e xposure to beam. 4. REPR ODU ...
1 English Power sources •W hen unplugging the unit from the wall outlet, al ways pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room. • In a damp room. • If the unit is ...
2 English Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started ............................................................ ...
3 English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX PUSH OPEN T APE FM/AM AUX VOLUME + – AUTO REVERSE REC 4 5 6 7 8 p 9 q w e r t MICRO COMPONENT SYSTEM T op view F ...
4 English Display window Display window 1 D AIL Y 1/2/3 (timer number) indicator 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) indicator 6 SLEEP indicator 7 SNOOZE indicator 8 FM mode indicators • MONO , ST (stereo) 9 MP3 indicator p SOUND indicator q BASS indicator w REC (rec ...
5 English Remote Control See pages in parentheses for details. When using the remote control, point it at the remote sensor on the front panel. 1 ST ANDBY/ON button (9, 21) 2 SLEEP button (22) 3 CLOCK/TIMER button (9, 20) 4 SET button (9, 16, 20, 21) 5 CANCEL button (20, 21) 6 Source buttons • CD 3¥8 , T APE 2 3 , FM/AM, A UX Pr essing one of th ...
6 English Getting Started Connecting Speakers Y ou can connect the speakers using the speaker cords. 1 Hold the clamp of the speaker terminal. 2 Insert the end of the speaker cord into the terminal. Match the polarity of the speaker terminals: red cord to ª and black cord to · . 3 Release y our f inger from the clamp. IMPORT ANT : • Use only sp ...
7 English Connecting Other Equipment To connect an audio equipment Y ou can connect audio equipment—used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete. F or pla ying other equipment through this unit, connect between the audio output jacks ...
8 English 1 2 3 R03(UM-4)/AAA(24F) Putting the Batteries into the Remote Control Insert the batteries—R03(UM-4)/AAA(24F)—into the remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same t ...
9 English Common Operations Setting the Clock Before operating the unit any further , f irst set the unit’ s clock. When you plug in the po wer cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode. On the r emote control ONL Y : 1 Pr ess CLOCK/TIMER. The hour indication star ...
10 English Selecting the Source To select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . To operate the CD play er , see pages 11 to 14. To operate the tape deck, see page 15. To operate the tuner (FM or AM), see pages 16 and 17. To recor d on a tape, see pages 18 and 19. ...
11 English Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. •Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently . 4 Press CD 6 . The unit automatically turns on and the source changes to the CD player . After ...
12 English To remo ve the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, f or e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start. • If no disc is inserted “NO DISC” app ...
13 English PROGRAM PRESET GROUP PRESET GROUP UP DOWN REPEA T Canceled ALL Repeat indicators ALL ALL GR. Canceled PROGRAM 5 Pr ess CD 3 / 8 . The tracks are played in the order you ha ve programed. When you f inished pro gramming the 60th track “FULL” will appear on the display . To stop playing, press 7 . To check the program contents Y ou can ...
14 English REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing. On the r emote control ONL Y : Press REMAIN r epeatedly . When playing bac k audio CD: • Each time you press the button, the display changes as follo ws, and t ...
15 English If no cassette is inserted when y ou press T APE ¤ ‹ “NO T APE” appears on the display . To stop playing, press 7 . To f ast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display . To remo ve the cassette, press PUSH OPEN on ...
16 English T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you press the button, the band alter nates between FM and AM. • If the station pre viously selected is stored in a preset number , the preset n ...
17 English 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN 3 Pr ess PRESET GROUP or PRESET GROUP to select a preset n umber , then press SET . The preset station is stored in memory . •E v en if you do not press SET , the station will automatically be stored on the selected preset number 5 seconds later . Y ou can also use the number ...
18 English 3 Start playing the source—FM, AM, or auxiliary equipment connected to A UX jack. •W hen the source is FM or AM, tune in to the station you w ant to record. • When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 19. 4 Press REC (r ecording). • The REC indicator appears and 3 indicator lights ...
19 English To stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume r ecording, press T APE ¤ ‹ . To stop recording , press 7 . The recording stops and the CD playback is paused. To record on both sides—Reverse Mode On the r emote control ONL Y : Press REV .MODE (re v erse mode) re peatedly unt ...
20 English Using the T imers There are four timers a vailable—Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f. How the Timer actually works Whe ...
21 English PRESET GROUP UP DOWN PRESET GROUP TUNER TAPE CD SET DAIL Y 1 To deactiv ate the timer , press and hold D AIL Y TIMER/SNOOZE repeatedly until (timer) and D AIL Y 1 , 2 , 3 or REC indicators go of f from the display . To change the timer , repeat steps 1 to 6 on pages 20 and this page. •T o acti v ate the Daily T imer again without chang ...
22 English Using Sleep T imer W ith Sleep T imer, you can fall aslee p to your fav orite music or radio program. •Y ou can set Sleep T imer only when the unit is turned on. •Y ou can also turn of f the unit automatically by using Auto Standby . (See page 9.) How the Sleep Timer actually works The unit automatically turns off after the specif ie ...
23 English Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. Cleaning the unit • Stains on the unit Sh ...
24 English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the pr oblem from the hints giv en here, or the unit has been physically damaged, call a qualif ied person, such as your dealer for service. Tr oubleshooting Symptom Power does not come on. No sound is hear ...
EN, SP, PR 0605NYMMDWORI © 2005 Victor Company Of Japan, Limited AC 110-127V VOL TAGE SELECTOR AC 220-240V AC 110-127V VOL T AGE SELECTOR AC 220-240V Mains (A C) Line Instruction (not applicable f or Eur ope , U .S.A., Canada, A ustralia, and U .K.) Instrucción sobre la línea de la red (CA) (no aplicab le para Europa, EE.UU ., Canadá, A ustrali ...
LVT1364-011A [A] MICR O COMPONENT SYSTEM INSTR UCTIONS UX-G4 –Consists of CA-UXG4 and SP-UXG4 Cover_UXG4[A] 05.3.22, 11:58 AM 1 ...
G-1 W arnings, Cautions and Other s CA UTION— (ST ANDBY/ON) b utton! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY lamp lights red. • When the unit is turned on, the ST ANDBY ...
G-2 IMPORT ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user ser viceab le par ts inside the unit; leav e all servicing to qualified ser vice personnel. 3. CA UTION: Visible and in visible laser r adiation when open and interlock f ailed or defeated. Av oid direct exposure to beam. 4. REPROD ...
1 Power sources •W hen unplugging the unit from the wall outlet, al ways pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room. • In a damp room. • If the unit is brought ...
2 Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 ...
3 Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 T op view Front view COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX PUSH OPEN T APE FM/AM AUX VOLUME + – AUTO REVERSE REC 4 5 6 7 8 p 9 q w e r t MICRO COMPONENT SYSTE ...
4 Display window Display window 1 D AIL Y 1/2/3 (timer number) indicator 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) indicator 6 SLEEP indicator 7 SNOOZE indicator 8 FM mode indicators • MONO , ST (stereo) 9 MP3 indicator p SOUND indicator q BASS indicator w REC (recording) ...
5 Remote Control See pages in parentheses for details. When using the remote control, point it at the remote sensor on the front panel. 1 ST ANDBY/ON button (8, 20) 2 SLEEP button (21) 3 CLOCK/TIMER button (8, 19) 4 SET button (8, 15, 19, 20) 5 CANCEL button (19, 20) 6 Source buttons • CD 3¥8 , T APE 2 3 , FM/AM, A UX Pr essing one of these butt ...
6 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately . Connecting AM and FM Antennas 1 Connect the supplie ...
7 Connecting Other Equipment To connect an audio equipment Y ou can connect audio equipment—used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete. F or pla ying other equipment through this unit, connect between the audio output jacks on the o ...
8 Common Operations Setting the Clock Before operating the unit any further , f irst set the unit’ s clock. When you plug in the po wer cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode. On the r emote control ONL Y : 1 Pr ess CLOCK/TIMER. The hour indication starts flash ...
9 Selecting the Source To select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . To operate the CD play er , see pages 10 to 13. To operate the tape deck, see page 14. To operate the tuner (FM or AM), see pages 15 and 16. To recor d on a tape, see pages 17 and 18. To use an ...
10 Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. •Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently . 4 Press CD 6 . The unit automatically turns on and the source changes to the CD player . After loading ...
11 To remo ve the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, f or e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start. • If no disc is inserted “NO DISC” appears on ...
12 PROGRAM PRESET GROUP PRESET GROUP UP DOWN REPEA T Canceled ALL Repeat indicators ALL ALL GR. Canceled PROGRAM 5 Pr ess CD 3 / 8 . The tracks are played in the order you ha ve programed. When you f inished pro gramming the 60th track “FULL” will appear on the display . To stop playing, press 7 . To check the program contents Y ou can check th ...
13 REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing. On the r emote control ONL Y : Press REMAIN r epeatedly . When playing bac k audio CD: • Each time you press the button, the display changes as follo ws, and the follo ...
14 If no cassette is inserted when y ou press T APE ¤ ‹ “NO T APE” appears on the display . To stop playing, press 7 . To f ast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display . To remo ve the cassette, press PUSH OPEN on the uni ...
15 T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you press the button, the band alter nates between FM and AM. • If the station pre viously selected is stored in a preset number , the preset number wi ...
16 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN T uning in to a Preset Station On the r emote control ONL Y : 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you press the button, the band alter nates between FM a ...
17 3 Start playing the source—FM, AM, or auxiliary equipment connected to A UX jack. •W hen the source is FM or AM, tune in to the station you w ant to record. • When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 18. 4 Press REC (r ecording). • The REC indicator appears and 3 indicator lights up on t ...
18 To stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume r ecording, press T APE ¤ ‹ . To stop recording , press 7 . The recording stops and the CD playback is paused. To record on both sides—Reverse Mode On the r emote control ONL Y : Press REV .MODE (re v erse mode) re peatedly until or is ...
19 Using the T imers There are four timers a vailable—Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 8). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f. How the Timer actually works When the on ...
20 PRESET GROUP UP DOWN PRESET GROUP TUNER TAPE CD SET DAIL Y 1 To deactiv ate the timer , press and hold D AIL Y TIMER/SNOOZE repeatedly until (timer) and D AIL Y 1 , 2 , 3 or REC indicators go of f from the display . To change the timer , repeat steps 1 to 6 on pages 19 and this page. •T o acti v ate the Daily T imer again without changing the ...
21 Using Sleep T imer W ith Sleep T imer, you can fall aslee p to your fav orite music or radio program. •Y ou can set Sleep T imer only when the unit is turned on. •Y ou can also turn of f the unit automatically by using Auto Standby . (See page 8.) How the Sleep Timer actually works The unit automatically turns off after the specif ied length ...
22 Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. Cleaning the unit • Stains on the unit Should be ...
23 If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the pr oblem from the hints giv en here, or the unit has been physically damaged, call a qualif ied person, such as your dealer for service. Tr oubleshooting Symptom Power does not come on. No sound is heard. Hard ...
24 Specifications Design and specifications ar e subject to change without notice. Amplifier Section Output Power: 25 W per channel, min. RMS, driv en into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. Audio input sensiti vity/Impedance (at 1 kHz) A UX: 500 mV/50 k Ω Speakers Impedance: 4 Ω – 16 Ω T uner FM tuning range: 8 ...
EN 0605NYMMDWORI © 2005 Victor Company Of Japan, Limited UX-G4 MICRO COMPONENT SYSTEM Cover_UXG4[A] 05.5.30, 3:01 PM 2 ...
JVC LVT1364-006Bのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- LVT1364-006Bの取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC LVT1364-006Bの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC LVT1364-006Bの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、JVC LVT1364-006Bの取り付け説明書、サービスマニュアル、簡易説明書、またはJVC LVT1364-006Bのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC LVT1364-006Bの製品を使用するにあたって最も人気のある説明書を閲覧できます。
JVC LVT1364-006Bデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC LVT1364-006Bを使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC LVT1364-006Bユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. JVC LVT1364-006Bの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC LVT1364-006Bの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC LVT1364-006Bに関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC LVT1364-006Bデバイスの基本機能を使うにあたってのヒント。 JVC LVT1364-006Bのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC LVT1364-006Bに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC LVT1364-006Bのメーカー/サービスへの連絡先に関する情報。
JVC LVT1364-006Bについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもJVC LVT1364-006Bの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC LVT1364-006Bで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。