日本語 dropdown-ico

Toshiba IK-SX1の取扱説明書

24ページ 0.14 mb
ダウンロード

ページに移動 of 24

Summary
  • Toshiba IK-SX1 - page 1

    1 For Customer Use Enter below the Serial No. which is located on the bottom of the cabinet. Re- tain this information for fu- ture reference. Model No.: IK-SX1L IK-SX1 Serial No.: CCD CAMERA IK-SX1L/IK-SX1 INSTRUCTION MANUAL W ARNING This is a Class A of EN55022 product. In a domestic environment this product may cause radio interference in which ...

  • Toshiba IK-SX1 - page 2

    2 Safety precautions Read the following safety precautions carefully before using the product. These instructions contain valuable information on safe and proper use that will prevent harm and damage to the operator and other persons. Make sure that you fully understand the following details (indications, graphic symbols) before proceeding to the m ...

  • Toshiba IK-SX1 - page 3

    3 Caution • Keep the followings when installing. • Do not put the product on a Inflammable material such as carpet or blanket. • Do not put the product in a narrow space, since the heat generated from the prod- uct may be difficult to emanate. • Do not put a inflammable material on the product. If you do not keep above, the heat generated b ...

  • Toshiba IK-SX1 - page 4

    4 T ABLE OF CONTENTS 1. CAUTIONS ON USE AND INST ALLA TION ................................................ 5 2. COMPONENTS ............................................................................................ 5 3. CAMERA P A RTS AND FUNCTIONS ........................................................... 6 4. CONNECTIONS ...................... ...

  • Toshiba IK-SX1 - page 5

    5 1. CAUTIONS ON USE AND INST ALLA TION • Carefully handle the units. Do not drop, or give a strong shock or vibration to the camera. This may cause problems. T reat the camera cables care- fully to prevent cable problems, such as cable breakdown and loosened connec- tions. • Do not shoot intense light. If there is an intense light at a locatio ...

  • Toshiba IK-SX1 - page 6

    6 1 1 1 1 1 Picture-shooting area The protection cap is attached on the lens mount portion. After removing the cap, mount the lens. Be careful not to scratch or touch the optical area. 2 2 2 2 2 DC IN 12V terminal Accept a DC power input (12V). 3 3 3 3 3 MODE SELECT switch Selects the gain mode (OFF/ON). Selects the synchronizing output signal (HD, ...

  • Toshiba IK-SX1 - page 7

    7 4. CONNECTIONS 4.1. Standard Connection Lens IK-SX1L IK-SX1 Image processor DC IN 12V DC power supply Camera cable (option) 4.2. Cautions on Connection • When connecting the camera cables, be sure to turn off the camera and the other equipment connected. • The lens for high resolution is recommended. When using another lens, the best camera p ...

  • Toshiba IK-SX1 - page 8

    8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +D0 (Video Data (LSB)) +D1 (Video Data) +D2 (Video Data) +D3 (Video Data) +D4 (Video Data) +D5 (Video Data) +D6 (Video Data) +D7 (Video Data (MSB)) +VD/+FEN +HD/+LEN +PCK (Pixel clock) T rigger in (T rigger input) CC3 (Partial Scanning setting) GND 15 16 17 18 19 20 21 22 23 24 25 26 27 28 –D0 (Video Data (LSB)) ...

  • Toshiba IK-SX1 - page 9

    9 6. Setting MODE SELECT switch 6.1 Gain switch Use this switch when the image is dark even if the lens iris is fully opened. When the gain ON is set, adjust the video signal level with the gain control volume on the rear panel. No. 1: Gain ON/OFF No. 2: Synchronizing signal selection No. 3: Mode setting No. 4: Mode setting No. 5: Mode setting No. ...

  • Toshiba IK-SX1 - page 10

    10 6.4 Electric shutter speed switch This sets the electric shutter speed and the exposure time for the 1-pulse trigger . Electric shutter speed 1/15 1/100 1/500 1/1000 1/2000 1/4000 1/10000 1/50000 No.6 OFF OFF OFF OFF ON ON ON ON No.7 OFF OFF ON ON OFF OFF ON ON No.8 OFF ON OFF ON OFF ON OFF ON Operation mode Scanning area 1/15 (70 lines, 60 fps) ...

  • Toshiba IK-SX1 - page 11

    11 7. Operation mode 7.1 Internal synchronization Horizontal synchronization: 15.998 kHz (28.63636 MHz x 1790 clocks) V ertical synchronization: 15 fps (14.98 Hz = 28.63636 MHz x 1790 clocks x 1068 lines) Output signal: Video data, pixel clock, FEN/VD, LEN/HD Video data (video period image) HD VD FEN LEN 7.2 Internal synchronization draft mode When ...

  • Toshiba IK-SX1 - page 12

    12 7.3 Internal synchronization par tial readout When the partial scanning is set, the frame rate can be increased by decreasing the num- ber of output lines. The number of settable output lines is 70/400/560/700 lines. For the detail, refer to “8. Partial Scanning”. Horizontal synchronization: 15.998 kHz (28.63636 MHz x 1790 clocks) Output sig ...

  • Toshiba IK-SX1 - page 13

    13 7.4 1-pulse trigger Exposure starts by the trigger signal input to the DIGIT AL terminal, and outputs a 1-frame image. The shutter speed (exposure period) is set with the MODE SELECT switch No. 6 - No. 8 on the rear panel. Input signal: T rigger Output signal: Video data, pixel clock, FEN/VD, LEN/HD Exposure period Video data (video period image ...

  • Toshiba IK-SX1 - page 14

    14 7.6 Pulse width trigger This is the mode to set the exposure period by the pulse width of the trigger signal ap- plied to the DIGIT AL terminal. This accumulates electric charge taking the trigger signal “L” period as exposure time, and developes a 1-frame image. The trigger signal mini- mum pulse width (“L” period) is 20 µ s (1/50000s) ...

  • Toshiba IK-SX1 - page 15

    15 8. Par tial Scanning The set number of vertical lines is partially scanning, and the frame rate can be increased. 8.1 Scanning area 1/15 (70 lines, 60 fps) 8.2 Scanning area 1/2.6 (400 lines, 30 fps) 8.3 Scanning area 1/2 (560 lines, 24 fps) 8.4 Scanning area 2/3 (700 lines, 20 fps) 70 lines 400 lines 560 lines 700 lines ...

  • Toshiba IK-SX1 - page 16

    16 9. Timing Char t 9-1 All pixel scanning 1 V -rate Internal synchronization 1-pulse trigger , pulse width trigger 1068H VD FEN Video output 1040H 11H 9H 8H Video period VD FEN 1040H 2H 9H Video output Video period ...

  • Toshiba IK-SX1 - page 17

    17 2 H-rate 1790 HD LEN 1392 402 180 4 The digits indicate the number of clocks. 1 clock = 34.9 ns (28.63636 MHz) Video output Video period 9.2 Draft mode 1 V -rate 267H VD FEN 260H 1H 1H 9H Video output Video period ...

  • Toshiba IK-SX1 - page 18

    18 2 H-rate 9.3 Par tial scanning 1 V -rate Internal synchronization 1790 HD LEN Video output 402 1392 4 180 Video period The digits indicate the number of clocks. 1 clock = 34.9 ns (28.63636 MHz) VD FEN 99H 66H 50H 36H 9H 70H 400H 560H 700H 98H 65H 49H 35H 276H 540H 668H 780H Video output Total Sweep-off period Sweep-off period Video period 70 lin ...

  • Toshiba IK-SX1 - page 19

    19 1-pulse trigger , pulse width trigger 2 H-rate FEN 99H 66H 50H 36H 9H 3H 70H 400H 560H 700H 98H 65H 49H 35H 276H 540H 668H 780H VD (internal synchronization output position) VD (output position) Video output Total Sweep-off period Sweep-off period Video period 70 lines readout 400 lines readout 560 lines readout 700 lines readout HD LEN Video ou ...

  • Toshiba IK-SX1 - page 20

    20 11. SPECIFICA TIONS 10. TROUBLESHOOTING CHART Symptoms No image Possible causes • Is power properly supplied? • Is the lens iris adjusted properly? • Is the CR T monitor adjusted properly? • Is the shutter mode set correctly? * Design and specifications are subject to change without notice. Power supply Power consumption Image sensor (Ef ...

  • Toshiba IK-SX1 - page 21

    21 12. EXTERIOR VIEW DC IN 12V MODE SELECT DIGITAL GAIN DC IN 12V MODE SELECT DIGITAL GAIN 3-M3 (screw depth 4mm[0.16"]) IK-SX1L IK-SX1 44 [1.73"] 22 [0.87"] 26 [1.02"] 12 [0.47"] 12 [0.47"] 12 [0.47"] 44 [1.73"] 3-M3 (screw depth 4mm[0.16"]) 26 [1.02"] 26 [1.02"] 4-M3 (screw depth 4mm[0.16&quo ...

  • Toshiba IK-SX1 - page 22

    22 Memo ...

  • Toshiba IK-SX1 - page 23

    23 Memo ...

  • Toshiba IK-SX1 - page 24

    24 LIMITED WARRANTY CCD CAMERA The Imaging Systems Division of T oshiba America Information Systems, Inc. (“ISD”) makes the following limited warran- ties with regard to this CCD Camera (“Product”). These limited warranties extend to the Original End-User (“Y ou[r]”). One (1) Y ear Limited Warranty of Labor and Parts: ISD warrants that ...

メーカー Toshiba カテゴリー Security Camera

Toshiba IK-SX1のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- IK-SX1の取扱説明書
- Toshibaの製品カード
- パンフレット
- またはToshiba IK-SX1の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Toshiba IK-SX1の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Toshiba IK-SX1の取り付け説明書、サービスマニュアル、簡易説明書、またはToshiba IK-SX1のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Toshiba IK-SX1の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Toshiba IK-SX1デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがToshiba IK-SX1を使用するのを助ける技術的文書のことです。説明書は通常、全てのToshiba IK-SX1ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Toshibaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Toshiba IK-SX1の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははToshiba IK-SX1の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Toshiba IK-SX1に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Toshiba IK-SX1デバイスの基本機能を使うにあたってのヒント。 Toshiba IK-SX1のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Toshiba IK-SX1に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるToshiba IK-SX1のメーカー/サービスへの連絡先に関する情報。

Toshiba IK-SX1についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもToshiba IK-SX1の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがToshiba IK-SX1で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)