-
Marantz VP-12S1s - page 1
Model VP-12S1 User Guide DLP TM Projector R ...
-
Marantz VP-12S1s - page 2
The lightning symbol in the triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark in the triangle is intended to alert the user to the presence of important operating a ...
-
Marantz VP-12S1s - page 3
IMPOR T ANT SAFETY INSTR UCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operational precautions which you should be particularly aware of. 1 . Read these Instructions: All the safety and operating instructions should be read be ...
-
Marantz VP-12S1s - page 4
ENGLISH FEATURES ................................................................................................................... 1 PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW ........................................... 2 Front and Top .................................................................................................... 2 Right Side ...
-
Marantz VP-12S1s - page 5
1 ENGLISH FEATURES 7 Optics • Texas Instruments Digital Light Processing Technology • High Definition Panel (1280 x 720), DMD TM HD • 16 : 9 Aspect Ratio • Newly developed custom optics by Minolta • 1200 : 1 Contrast Ratio • 700 ANSI Lumens Brightness • Brightness Uniformity : 90 % • No Halo Effect • Lens Up/Down Shift constructio ...
-
Marantz VP-12S1s - page 6
2 ENGLISH q IR sensor (front and rear) w Projection Lens e V entilation holes Notes: • Do not place anything near the ventilation holes to avoid overheat inside the unit. • Do not place your hand or objects near the ventilation holes; the air is coming out. r Adjustable feet Adjust the vertical angle of the projector. t Focus ring Adjust the pi ...
-
Marantz VP-12S1s - page 7
3 INTRODUCTION ENGLISH z COMPONENT VIDEO IN Y, P B /C B , P R /C R connectors. Connect the COMPONENT VIDEO output from video equipment or an A/V processor/receiver with a component video output. x S-VIDEO IN Connect the S-VIDEO output from a video equipment. c VIDEO IN Connect the composite video output from a video equipment. v RGB IN Connect the ...
-
Marantz VP-12S1s - page 8
4 ENGLISH ⁄1 TRIG.2(TRIGGER 2) Select ON or OFF at each aspect mode, such as Full, Normal, Zoom, and Through to control screen aspect ratio with powered up/down dual aspect ratio screen. Note: Do not use TRIG.1 and TRIG.2, as the power source. ⁄2 LIGHT ON/OFF Select ON : The connector panel lights up. ⁄3 RS232C Connect the RS232C of equipment ...
-
Marantz VP-12S1s - page 9
5 INTRODUCTION ENGLISH Height Adjustment How to use adjustable feet and adjustment lever. (1) Release the adjustable feet. (2) Detail adjustment PRESS DOWN DOWN UP Note : Lift the unit up carefully. q q w Bottom q Adjustment lever Lift the projector and turn the adjustment lever right or left. The adjustable feet will extend from the projector. The ...
-
Marantz VP-12S1s - page 10
6 ENGLISH a PO WER ON key Turn the projector on. s ST ANDBY key Turn the projector off. d 3 / 4 / 1 / 2 keys Control the MENU cursor. f ENTER key Confirm "Reset All", "Reset Lamp Life", "New Lamp?". g MENU key Display the on-screen menu. h COMPONENT key Select the COMPONENT VIDEO IN signal. j S-VIDEO key Select the S-V ...
-
Marantz VP-12S1s - page 11
7 INTRODUCTION ENGLISH 1. Open the cover. 2. Insert batteries (AA). Make sure to match the + and – marks on the batteries with inside the battery compartment. 3. Close the cover. CAUTION – The available battery types are limited: manganese dry cell and alkaline dry cell. – Do not mix different battery types. – Do not mix old and new batteri ...
-
Marantz VP-12S1s - page 12
8 ENGLISH VP-12S1 Adjust the vertical and horizontal positions of the projector. Side view Flat view INSTALLATION Recommended Setting CAUTION – For ceiling installation, consult with Marantz authorized dealer. – Do not look into the lens when the projector is turned on. It could damage your eyesight. Horizontal center of the screen Throw distan ...
-
Marantz VP-12S1s - page 13
9 SET UP PROCEDURES ENGLISH VP-12S1 40 inch 60 inch 80 inch 100 inch 120 inch 150 inch 200 inch 250 inch 50 7 / 16 inch 1,281 mm 76 9 / 16 inch 1,945 mm 102 3 / 4 inch 2,609 mm 128 7 / 8 inch 3,273 mm 155 inch 3,938 mm 194 1 / 4 inch 4,934 mm 259 5 / 8 inch 6,594 mm 325 inch 8,255 mm Screen Size (Diagonal) 16:9 screen Throw distance Minimum Maximum ...
-
Marantz VP-12S1s - page 14
10 ENGLISH You can adjust the image position with the Lens Shift knob. 7 Turn the Lens Shift knob to clockwise : The image goes up. • Maximum range to throw up : Bottom of the image correspond to the center of the Projection Lens. 7 Turn the Lens Shift knob to counterclockwise : The image goes down. • Maximum range to throw down : Top of the im ...
-
Marantz VP-12S1s - page 15
11 SET UP PROCEDURES ENGLISH When the projecting image is a trapezoid, correct it in Keystone-V and/or Keystone-H in the Display Menu. 7 Keystone-V(Electronic vertical keystone correction) Adv anced Setting 7 Keystone-H(Electronic horizontal keystone correction) Note : Electronic horizontal keystone correction works properly when the lens shift pos ...
-
Marantz VP-12S1s - page 16
12 ENGLISH • Press the ZOOM key, the NORMAL key or the FULL key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. • Press the FULL key on the remote controller for the squeezed video source. 7 Full mode ...
-
Marantz VP-12S1s - page 17
13 SET UP PROCEDURES ENGLISH • Press the ZOOM key, the NORMAL key or the FULL key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. • Press the FULL key on the remote controller for the squeezed video s ...
-
Marantz VP-12S1s - page 18
14 ENGLISH DV D VCR S-VIDEO OUT VIDEO OUT COMPONENT VIDEO OUT Computer HD Set T op Bo x / BS T uner RGB OUT RGB OUT When making connections be sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the plug properly. Any plugs that are not fully inserted often generate a noise. W ...
-
Marantz VP-12S1s - page 19
15 SET UP PROCEDURES ENGLISH Receiver equipment with a Dolby Digital decoder DIGIT AL A UDIO IN D V -SD OUT DV camcoder Connection with a D V camcoder Note: DV IN connector is available for DV-SD format of i.LINK(IEEE1394). Receiver equipment with a Dolby Digital decoder REMO TE CONTROL IN REMO TE CONTROL OUT External Controller RS-232C 35mm Mini P ...
-
Marantz VP-12S1s - page 20
16 ENGLISH 1. Connect the supplied AC power cord. The STANDBY indicator lights up and the projector goes into the standby mode. 2. Press the POWER ON key on the remote controller or the POWER key on the projector. The POWER indicator lights up. 3. Press the FOCUS key on the remote controller to display the FOCUS pattern and turn the Focus ring to m ...
-
Marantz VP-12S1s - page 21
17 OPERATIONS ENGLISH Adjust the picture to suit own preference by using the Picture Adjust feature. 7 For a video signal input, the following adjustments can be made: NOTE: The user cannot adjust Tint in Component signal (YC B C R /YP B P R ). – Contrast Use 1 / 2 key to adjust. Use 3 / 4 key to go back to the MENU. Contrast 50 The following set ...
-
Marantz VP-12S1s - page 22
18 ENGLISH The following adjustments can be made: 7 OSD Position (16:9 / 4:3 / Through ) 7 Language (English/ German/ French/ Spanish/ Portuguese/ Italian) 7 Ceiling (On/Off) ON: The picture is reversed horizontally and vertically. 7 Rear (On/Off) ON: The picture is reversed horizontally. 7 Reset Lamp Life (Yes/No) 7 Reset All (Yes/No) – OSD Posi ...
-
Marantz VP-12S1s - page 23
19 OPERATIONS ENGLISH Select 12V DC or 0V from on and off at each aspect mode. Full, Normal, Zoom, and Through. On: Output DC 12V. Off: No output. This allows such as a powered dual aspect screen according to the aspect mode. T rigger2 – Reset Lamp Life When replace the lamp unit, before the Lamp Life becomes "0" hours need to reset lam ...
-
Marantz VP-12S1s - page 24
20 ENGLISH Lamp Life Display the remaining lamp life by pressing the INFO key on the remote controller. Notes: • When the Lamp Life becomes less than 100 hours , it is recommended to replace the lamp unit. A lamp may be worn out when the Lamp Life becomes less than 100 hours . • The projector is designed not to turn on after the lamp use has ex ...
-
Marantz VP-12S1s - page 25
21 ADDITIONAL INFORMATION ENGLISH CAUTION: • Do not touch the lamp and the lamp unit immediately. It will be extremely hot. Allow at least one hour for the lamp to cool down before handling. • Do not loosen any screws except for those mentioned below. • The lamp may break if handled improperly. • Do not use other than a Marantz replacement ...
-
Marantz VP-12S1s - page 26
22 ENGLISH No power Image is not displayed. Poor color. Picture is too dark. Picture is not clear. Picture rolls. The Remote Controller does not work. AC power cord is not connected correctly. Lamp cover is not closed correctly. A signal cable is not connected correctly. Selected input is incorrect. The picture mute is active. Picture is not adjust ...
-
Marantz VP-12S1s - page 27
23 ADDITIONAL INFORMATION ENGLISH 7 Optical characteristics Panel 0.85inch 16:9 1,280 x 720 pixels Digital Micromirror Device TM Lamp Super High Pressure 150W Lens f: 26.5 to 30.7 / F: 3.0 Projection size 40 to 250 inches Light output 700 ANSI LUMEN typical 7 INPUT/OUTPUT VIDEO IN RCA x 1 NTSC-3.58/PAL-4.43/SECAM Composite video 1.0V p-p /75 Ohm S- ...
-
Marantz VP-12S1s - page 28
24 ENGLISH 7 Timing chart NTSC P AL-B/G SECAM 480/60p 576/50p 1035/60i 1080/60i 1080/50i 1080/48i 720/60p 720/50p 720/48p 540/60p 640x350 #1 640x350 #1 640x400 #1 640x400 #1 640x480 640x480 #1 640x480 #1 640x480 #1 800x600 800x600 800x600 #1 800x600 #1 800x600 #1 1024x768 1024x768 1024x768 #1 1024x768 #1 1024x768 #1 768x240 960x287.5 960x287.5 720x ...
-
Marantz VP-12S1s - page 29
25 ADDITIONAL INFORMATION ENGLISH (346.5 mm) 13 5/8 inch (344 mm) 13 3/8 inch (19.8 mm) 3/4 inch (110 mm) (93.5 mm) 4 5/16 inch 3 11/16 inch (124.5 mm) 4 7/8 inch (127 mm) 5 inch (421 mm) 16 9/16 inch 471 mm 18 9/16 inch (132 mm) 5 3/16 inch (404.5 mm) 15 15/16 inch (222 mm) 8 3/4 inch (182.5 mm) 7 3/16 inch (222 mm) 8 3/4 inch (182.5 mm) 7 3/16 in ...
-
Marantz VP-12S1s - page 30
COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd., 24 Lionel Road, Mt. Waverley, VIC 3149, Australia AUSTRIA Huber & Prohaska GmbH Taborstra ß e 95 / Ladestra ß e 1, Geb ä ude Hangartner, A-1200 Wien, Austria ...
Marantz VP-12S1sについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもMarantz VP-12S1sの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMarantz VP-12S1sで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。