日本語 dropdown-ico

Siemens PC 870の取扱説明書

48ページ 0.31 mb
ダウンロード

ページに移動 of 48

Summary
  • Siemens PC 870 - page 1

    Preface, T able of Contents Product Overview 1 Description of Device 2 Mounting 3 Maintenance 4 Appendices T echnical Data, Keyboard T able A Guidelines for ESD B Index This manual is part of the documentation package with the order number 6A V7691–0AB00–0AB0 Edition 07/01 Panel PC 670 / 870 Operating Unit Equipment Manual SIMA TIC PC ...

  • Siemens PC 870 - page 2

    This manual contains infor mati on which you must observe for your personal safet y and to prevent mater ial damage. The informat ion is denoted by a war ning triangl e and is dif f er enti at ed as foll ows, depending on the degree of danger : ! Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serio ...

  • Siemens PC 870 - page 3

    Y ou will find the registered trademarks of Siemens AG in the preface. The remaining marks used in this publication (or on the CD) may be trademarks, the use of which by third parties for their own purposes could violate the rights of the owner . Publisher: A&D PT1D1 Editor: A&D SE ES4. T rademarks Impressum W e have checked the content of ...

  • Siemens PC 870 - page 4

    ...

  • Siemens PC 870 - page 5

    i SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Preface Purpose of the manual This manual contains information which you require when using the operating unit of the SIMA TIC Panel PC 670 or PC 870. With this information you can:  become acquainted with the functions and components of the operating unit,  separate ...

  • Siemens PC 870 - page 6

    Preface ii SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Documentation  Commissioning Instructions The Commissioning Instructions are supplied as a paper document. The docu- ment is intended for commissioning engineers and system administrators. The Commissioning Instructions describe briefly the most important steps ...

  • Siemens PC 870 - page 7

    Preface iii SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 T rademarks The following names are registered trademarks of Siemens AG:  SIMA TIC   SIMA TIC HMI   HMI   ProT ool   ProT ool/Lite   ProT ool/Pro   SIMA TIC Multi Panel   SIMA TIC Multifunctional Platform   MP 27 ...

  • Siemens PC 870 - page 8

    Preface iv SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 W orldwide (Nuremberg) T echnical Support (FreeContact) Local time: Mon.-Fri. 7:00 to17:00 T elephone: +49 (180) 5050-222 Fax: +49 (180) 5050-223 E-Mail: techsupport@ ad.siemens.de GMT : +1:00 W orldwide (Nuremberg) T echnical Support (fee–based, only with SIMA ...

  • Siemens PC 870 - page 9

    T able of Contents v SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 T able of Contents Preface i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product Overview 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens PC 870 - page 10

    T able of Contents vi SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 B Appendix B: ESD Guidelines B-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index Index-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens PC 870 - page 11

    1-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Product Overview The SIMA TIC Panel PC 670 and PC870 are industry-standard PC plat- forms for demanding tasks in the field of PC-based automation. They are designed as fitted units for local use directly on the machine in  switch cabinets/consoles  19” cabinets/r ...

  • Siemens PC 870 - page 12

    Product Overview 1-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 1.1 Panel PC 670: Computing and operating units The computing unit is screwed to the rear of the operating unit with two mounting rails and can be separated from the latter . Figure 1-1 shows an example of the complete device and indicates the connection ...

  • Siemens PC 870 - page 13

    Product Overview 1-3 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01  Function keys/soft keys – 2 x 8 ver t ic al rows of keys wit h sof t -key and opt ional direct–k ey funct ions – 2 x 10 horizontal rows of keys with soft-key functions – labeling strips for the rows of soft keys  Shift key for switching to ...

  • Siemens PC 870 - page 14

    Product Overview 1-4 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 1.2 Panel PC 870: Computing and operating units The computing unit is screwed to the rear of the operating unit with two mounting rails and can be separated from the latter (see Section 4.2.2). Figure 1-2 shows an example of the complete device: Operatin ...

  • Siemens PC 870 - page 15

    Product Overview 1-5 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01  Shift key for switching to the second level of key functions  Integrated piezo mouse  Status LEDs for power supply and temperature  USB interface on front side for connecting external peripheral devices  Degree of protection IP 54 / IP 65 ...

  • Siemens PC 870 - page 16

    Product Overview 1-6 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 ...

  • Siemens PC 870 - page 17

    2-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Description of Device T able 2-1 indicates which combinations of operating units and computing units can be delivered. T able 2-1 Combinations of operating units and computing units which can be delivered A vailable in combination with 10” 12” 12” T ouch 15” 15? ...

  • Siemens PC 870 - page 18

    Description of Device 2-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.1 Operating units with key-based front panels The number of keys, their labeling and their functionality are identical on all operating units featuring key-based front panels. The various ty- pes of front panel differ only in the arrangement the k ...

  • Siemens PC 870 - page 19

    Description of Device 2-3 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.1.2 Keyboard The keyboard is subdivided into different functional groups of keys:  function keys, soft keys  control keys  alpha keys  numeric keys  cursor keys The function keys arranged on the left and right of the display and in ...

  • Siemens PC 870 - page 20

    Description of Device 2-4 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 The alpha keys are used to enter letters, special characters, spaces and underscores: Space Underscore Fig. 2-4 Alpha keys In their basic assignment, the alpha keys are used to enter lower-case letters. T o enter upper-case letters, press and hold d ...

  • Siemens PC 870 - page 21

    Description of Device 2-5 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Most of the numeric keys have also been assigned special characters, arithmetic characters or the plus sign. The special characters are iden- tified in white, in the top left corner of the keys concerned. T o enter the plus sign, the special charact ...

  • Siemens PC 870 - page 22

    Description of Device 2-6 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.2 Operating units with touchscreen front panels The 12.1” version and the 15.1” version of the touchscreen front panels differ in their dimensions and the size of their displays. The 12.1” ver- sion does not have drill holes (covers) at the ...

  • Siemens PC 870 - page 23

    Description of Device 2-7 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.3 Interfaces The operating unit has interfaces on the front and rear sides. 2.3.1 Front-side USB interface On the front side of the panel (see Figures 2-1 and 2-7) there is a USB interface protected by a rubber cover . This can be used, for exampl ...

  • Siemens PC 870 - page 24

    Description of Device 2-8 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.3.3 Interface assignment T able 2-2 P i n a ssi gn m en t o f f ro nt -s i d e U SB i n t e r fa ce Pin Name T ype Remark 4 4 USB_GND V Chassis ground for external USB in- terface 4 3 3 USB_D0P B Data+, USB channel 0 3 2 2 USB_D0M B Data–, USB c ...

  • Siemens PC 870 - page 25

    Description of Device 2-9 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.4 Device dimensions 2.4.1 Dimensions of Panel PC 670 T ± 0.5 10 A ± 2 ± 0.5 297 10 L ± 0.3 Ü B ± 1 267 ± 0.5 H ± 0.5 T2 ± 0.5 +3 Front panel Operating units L H T T2 A B Ü (a) with key–based front panels: 10.4” TFT / 12.1” TFT 483 ...

  • Siemens PC 870 - page 26

    Description of Device 2-10 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.4.2 Dimensions of Panel PC 870 Operating units L H T * T2 A B Ü (a) with key-based front panels: 12.1” TFT 483 310 187 20 50 12 143 15.1” TFT 483 355 212 42 50 20 143 (b) with touchscreen front panel: 15.1” TFT 483 310 212 42 50 12 143 Ope ...

  • Siemens PC 870 - page 27

    3-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Mounting 3.1 Mounting cut-out 3.1.1 Panel PC 670 A mounting cut-out is required as shown in the figure and explanatory table below: Operating units W H D (mounting depth **) (a) with key-based front panels: 10.” TFT / 12.1” TFT 450 290 1 10 15.1” TFT 450 321 140 (b ...

  • Siemens PC 870 - page 28

    Mounting 3-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 When installing in an enclosed housing, ensure that there is sufficient volume for air circulation and, if necessary , for swinging out the compu- ting unit (see also Figures 2-9 and 4-1). The maximum air intake temperature must not exceed 45 ° C. 3.1.2 Panel P ...

  • Siemens PC 870 - page 29

    Mounting 3-3 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 3.2 Installation 3.2.1 Panel PC 670 The operating unit can be fitted in the mounting cut-out with either clamps or screws. Screwed joints are not possible with the 12.1” touchscreen version! Protection class IP 65 is possible when the operating unit is secured ...

  • Siemens PC 870 - page 30

    Mounting 3-4 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 The clamps and grub screws required for installation are supplied with the device. Proceed as follows: 1. Insert the complete operating unit and computing unit into the moun- ting cut-out prepared as described in Section 3.1, working from the front. 2. From the ...

  • Siemens PC 870 - page 31

    Mounting 3-5 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 L1 L2 11 2 ± 0.5 L4 L5 11 2 ± 0.5 ± 1 56 min. 1.5 – max. 6 L3 ± 1 A1 ± 1 A2 ± 1 Clamp with grub screws Drill hole for ± 0.2 ± 0.2 +1 +1 Rz 120 (in gasket area) Gasket area M6/ 7 Pressure points for clamps screw fixings L3 ± 11 1 2 ± 0.5 Operating uni ...

  • Siemens PC 870 - page 32

    Mounting 3-6 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Operating unit Computing unit Knurled screw Knurled screw Hinge Hinge Fig. 3-5 Joining the operating and computing units Proceed as follows (Figure 3-6): Drill hole covers Fig. 3-6 Installation with screw fixing 1. Drill suitable holes around the prepared mounti ...

  • Siemens PC 870 - page 33

    4-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Maintenance 4.1 Spare parts and accessories The spare parts and accessories which can be delivered are listed be- low . 4.1.1 Spare parts The only spare part is the operating unit itself. A generally valid order no. cannot be given because it depends on the order number ...

  • Siemens PC 870 - page 34

    Maintenance 4-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 4.2 Detaching the operating unit from the computing unit It may at some stage become necessary to separate the operating unit from the computing unit, e.g. to replace the operating unit. 4.2.1 Panel PC 670 T o swing the computing unit away from the operating ...

  • Siemens PC 870 - page 35

    Maintenance 4-3 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 T o remove the computing unit completely , continue as follows: 3. Remove the cable connectors K1 and K2 of the operating unit (see Figure 4-2) from their corresponding counterparts on the computing unit. T wo mounting rails are screwed to the computing unit. ...

  • Siemens PC 870 - page 36

    Maintenance 4-4 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 4.2.2 Panel PC 870 Proceed as follows: 1. Disconnect the power supply . 2. Swing open the mounting panel to obtain access to the rear of the PC 870. 3. Loosen the four (retained) knurled screws which secure the compu- ting unit to the rear side of the operati ...

  • Siemens PC 870 - page 37

    Maintenance 4-5 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Display cable K2 3 ) I/O USB cable K1 3 ) 3 ) Cable folded: 200 mm longer than illustrated 1 ) 1 ) 1 ) Slits for mounting rails 2 ) Slits for soft-key labeling strips 1 ) 1 ) 2 ) 2 ) 2 ) 2 ) Fig. 4-4 Rear side of operating panel with positions of interfaces R ...

  • Siemens PC 870 - page 38

    Maintenance 4-6 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 4.3 Replacing soft key labeling (operating units with key-based front panels only) The two horizontal and two vertical rows of soft keys of the operating units with key-based front panels can be assigned user-specific func- tions. Y ou can use two printed lab ...

  • Siemens PC 870 - page 39

    A-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Appendix A: T echnical Data A.1 T echnical data of operating unit T able A-1 Panel PC technical data Color display 10.4” TFT 1 ) 12.1” TFT 15.1” TFT 12.1” TFT 1 ) T ouchscreen 15.1 “ TFT T ouchscreen Resolution 640 x 480 800 x 600 1024 x 768 800 x 600 1024 x 7 ...

  • Siemens PC 870 - page 40

    Appendix A: T echnical Data A-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Interfaces USB 1 x front panel *), 1 x rear panel (internal connection to the computing unit) Safety Protection class Conforms to VDE 0106 T1: 1982 (IEC 536) Degree of protection a. with screw fixing IP 54 g b. with clamp fixing, gasket and in ...

  • Siemens PC 870 - page 41

    Appendix A: T echnical Data A-3 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 A.2 Keyboard table (operating units with key-based front panels) By using the following table, you can check the standard keyboard assignment and the corresponding key codes. T able A-2 Standard keyboard assignment Key number Code Key label/na ...

  • Siemens PC 870 - page 42

    Appendix A: T echnical Data A-4 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Key number Code Key label/name 21 13 p 21a1 31/s ’ 22 12 o 22a1 31 23 11 n 23a1 30/s } 24 10 m 24a1 2f/s { 25 40 F7 26 3e/s F17 (Shift F5) 27 26 9 27a1 22/s % 28 25 8 28a1 22/A 29 24 7 29a1 21/s $ 30 18 u 30a1 33/s : 31 17 t 31a1 33 ; 32 1 ...

  • Siemens PC 870 - page 43

    Appendix A: T echnical Data A-5 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Key number Code Key label/name 46 2c (BLANK) 46a1 2d/s _ 47 1d z 48 1c y 48a1 1f/s @ 49 3d F4 50 3b/s F14 (Shift F2) 51 56 - 51a1 57 + 52 27 0 52a1 2e = 53 37 . 56 2a (Backspace) 57 3c F3 58 3a/s F13 (Shift F1) 61 52 (CURSOR UP) 62 4b (P AGE U ...

  • Siemens PC 870 - page 44

    Appendix A: T echnical Data A-6 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Key number Code Key label/name 91 44/s,3 S3 (Shift F1 1) 92 45/s,4 S4 (Shift F12) 93 3a/c,5 S5 (control F1) 94 3b/c,6 S6 (control F2) 95 3c/c,7 S7 (control F3) 96 3d/c,8 S8 (control F4) 97 3e/c,9 S9 (control F5) 98 3f/c,10 S10 (control F6) 99 ...

  • Siemens PC 870 - page 45

    B-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Appendix B: ESD Guidelines What does ESD mean? Virtually all present-day modules incorporate highly integrated MOS devices or components. Due to the technologies used, these electronic components are very sensitive to overvoltages and consequently therefore to electrosta ...

  • Siemens PC 870 - page 46

    Appendix B: ESD Guidelines B-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Handling ESD assemblies A general rule is that assemblies should be touched only when this cannot be avoi- ded in the course of the work that has to performed on them. Under no circumstan- ces should you touch device pins or circuitry when hand ...

  • Siemens PC 870 - page 47

    Index Index-1 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Index A alpha keys, 2-4 ambient conditions, A-2 arithmetic characters, 2-5 C cable connectors, 4-3, 4-4 certification, A-2 clamps, 1-3, 1-5, 3-4, 3-5 control keys, 2-3 cursor keys, 2-5 D degree of protection, 1-3, 1-5 device front panel key–based panels, 2-2 ...

  • Siemens PC 870 - page 48

    Index Index-2 SIMA TIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 protection class, A-2 R relative humidity , A-2 S safety , A-2 safety regulations, A-2 SHIFT key , 1-3, 1-5 shock load, A-2 signs, 2-5 soft keys, 1-3, 1-4, 2-3 special characters, 2-4, 2-5 static discharges, B-1 status LEDs, 1-3, 1-5 T temperature limit values, ...

メーカー Siemens カテゴリー Personal Computer

Siemens PC 870のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- PC 870の取扱説明書
- Siemensの製品カード
- パンフレット
- またはSiemens PC 870の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Siemens PC 870の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Siemens PC 870の取り付け説明書、サービスマニュアル、簡易説明書、またはSiemens PC 870のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Siemens PC 870の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Siemens PC 870デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSiemens PC 870を使用するのを助ける技術的文書のことです。説明書は通常、全てのSiemens PC 870ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Siemensの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Siemens PC 870の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSiemens PC 870の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Siemens PC 870に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Siemens PC 870デバイスの基本機能を使うにあたってのヒント。 Siemens PC 870のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Siemens PC 870に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSiemens PC 870のメーカー/サービスへの連絡先に関する情報。

Siemens PC 870についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもSiemens PC 870の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSiemens PC 870で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)