日本語 dropdown-ico

HP (Hewlett-Packard) Pro100Bの取扱説明書

27ページ 0.71 mb
ダウンロード

ページに移動 of 27

Summary
  • HP (Hewlett-Packard) Pro100B - page 1

    Intel Ether Express Pro100B Adapter Installation Guide Pro100B.book Page 1 Friday, December 10, 19 99 4:02 PM ...

  • HP (Hewlett-Packard) Pro100B - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this m aterial, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for inci ...

  • HP (Hewlett-Packard) Pro100B - page 3

    Contents 1 Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before installing the net work adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to Forcibly Modify Resources Allocated to the Intel EtherExpress Pro100B PC adapter . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Pro100B - page 4

    2 Connecting to a Novell NetW are 5.0 Server . . . . . . . . . . . . . . . . . . . 18 Microsoft Windows 98 2nd edition Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Pro100B - page 5

    3 Read This First 1 Read This First Before installing the network adapter: • If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS field to YES. • If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field to NO. • If your OS is Windows 98 2 nd edition, go into the BIOS setup and set PnP OS field to YES. • If ...

  • HP (Hewlett-Packard) Pro100B - page 6

    4 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 95 SR2.5 2 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Wi ...

  • HP (Hewlett-Packard) Pro100B - page 7

    5 Connecting to a Novell NetWare 5.0 Server Microsoft Window s 95 SR2.5 12 Select either “ Typical ” or “ Custom ” and click on “ Install ” . Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advance d user. When prompted for options during installation, ask your Network Administr ...

  • HP (Hewlett-Packard) Pro100B - page 8

    6 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 95 SR2.5 Problem 2 W indows 95 will lose all network connections when t he system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/ Q238/8/71.asp) T o prevent this problem: 1 From t ...

  • HP (Hewlett-Packard) Pro100B - page 9

    7 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Window s 95 SR2.5 3 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and ...

  • HP (Hewlett-Packard) Pro100B - page 10

    8 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Wind ows 95 SR2.5 Known Problems Problem 1 W indows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5 driver) for the “ Intel PRO/100B PCI adapter ” , from the Intel driver diskette during installation . This driver will not succes sfully install in Microsof t W indows 95 SR ...

  • HP (Hewlett-Packard) Pro100B - page 11

    9 Connecting to a Novell NetWare 4.11 Server Microsoft Window s 95 SR2.5 4 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to W ...

  • HP (Hewlett-Packard) Pro100B - page 12

    10 Connecting to a Novell NetWare 4.11 Server Microsoft Wind ows 95 SR2.5 12 Select either “ Typical ” or “ Custom ” and click on “ Install ” . Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administ ...

  • HP (Hewlett-Packard) Pro100B - page 13

    11 Connecting to a Novell NetWare 4.11 Server Microsoft Window s 95 SR2.5 Problem 2 W indows 95 will lose all network connections when t he system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/ Q238/8/71.asp) T o prevent this problem: 1 From ...

  • HP (Hewlett-Packard) Pro100B - page 14

    12 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the ma ...

  • HP (Hewlett-Packard) Pro100B - page 15

    13 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrator ...

  • HP (Hewlett-Packard) Pro100B - page 16

    14 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 6 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Pow ...

  • HP (Hewlett-Packard) Pro100B - page 17

    15 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Adminis ...

  • HP (Hewlett-Packard) Pro100B - page 18

    16 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 7 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the ...

  • HP (Hewlett-Packard) Pro100B - page 19

    17 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrato ...

  • HP (Hewlett-Packard) Pro100B - page 20

    18 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 98 2nd editio n 8 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2 nd edition Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine ...

  • HP (Hewlett-Packard) Pro100B - page 21

    19 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2nd edition 9 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2 nd edition Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on th ...

  • HP (Hewlett-Packard) Pro100B - page 22

    20 Connecting to a Novell NetWare 4.11 Server Microsoft Wind ows 98 2nd editio n 10 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2 nd edition Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the mach ...

  • HP (Hewlett-Packard) Pro100B - page 23

    21 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 11 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machin ...

  • HP (Hewlett-Packard) Pro100B - page 24

    22 Connecting to a Windows NT 4.0 Server Microsoft Windows fo r Workgroups v3.11 13 Click “ OK ” at the “ Network Setup ” dialog b ox. 14 If needed, enter changes to the “ Microsoft Windows Network Names ” dialog box and click “ OK ” . 15 Windows will prompt for the location of several files. Type the path to the file locations and ...

  • HP (Hewlett-Packard) Pro100B - page 25

    23 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 12 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on ...

  • HP (Hewlett-Packard) Pro100B - page 26

    24 Connecting to a Novell NetWare 4.11 Server Microsoft Windows fo r Workgroups v3.11 13 Insert the driver disk and click on “ Have Disk …” when prompted for drivers. 14 Type in the location of the 32-bit LAN driver and click “ Add ” . 15 Click “ Next ” to continue with the installation. 16 Modify the LAN adapter settings if needed an ...

  • HP (Hewlett-Packard) Pro100B - page 27

    V ers ion Number Rev 2. December 1999 Pro100B.book Page xxvi Friday, December 10, 1999 4:02 PM ...

メーカー HP (Hewlett-Packard) カテゴリー Network Card

HP (Hewlett-Packard) Pro100Bのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Pro100Bの取扱説明書
- HP (Hewlett-Packard)の製品カード
- パンフレット
- またはHP (Hewlett-Packard) Pro100Bの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、HP (Hewlett-Packard) Pro100Bの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、HP (Hewlett-Packard) Pro100Bの取り付け説明書、サービスマニュアル、簡易説明書、またはHP (Hewlett-Packard) Pro100Bのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、HP (Hewlett-Packard) Pro100Bの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

HP (Hewlett-Packard) Pro100Bデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHP (Hewlett-Packard) Pro100Bを使用するのを助ける技術的文書のことです。説明書は通常、全てのHP (Hewlett-Packard) Pro100Bユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

HP (Hewlett-Packard)の取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. HP (Hewlett-Packard) Pro100Bの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHP (Hewlett-Packard) Pro100Bの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。HP (Hewlett-Packard) Pro100Bに関してこのドキュメントで見つけることができる全てのヒントの目次
3. HP (Hewlett-Packard) Pro100Bデバイスの基本機能を使うにあたってのヒント。 HP (Hewlett-Packard) Pro100Bのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。HP (Hewlett-Packard) Pro100Bに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHP (Hewlett-Packard) Pro100Bのメーカー/サービスへの連絡先に関する情報。

HP (Hewlett-Packard) Pro100Bについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもHP (Hewlett-Packard) Pro100Bの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHP (Hewlett-Packard) Pro100Bで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)