日本語 dropdown-ico

Sceptre Technologies X9G-NAGAVの取扱説明書

22ページ 0.3 mb
ダウンロード

ページに移動 of 22

Summary
  • Sceptre Technologies X9G-NAGAV - page 1

    X9G-NagaV User ’ s Manual ...

  • Sceptre Technologies X9G-NAGAV - page 2

    i FCC Compliance Statement This device complies with part 15 of t he FCC Rules. Operation is subject to the following two conditions: 1. This device may not caus e harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and ...

  • Sceptre Technologies X9G-NAGAV - page 3

    ii The Federal Communications Commission warns that changes or modifications of the unit not expre ssly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. CE mark for Class B ITE (Follow ing European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A ...

  • Sceptre Technologies X9G-NAGAV - page 4

    iii T ABLE OF C ONTENTS TABLE OF CO NTENTS .......................................................................................... III Your New LCD Monitor 1 Unpacking 1 Identifying Components 3 Adjusting the Tilting Angle 5 Connecting AC Pow er and Video Cable 6 Pow er Management System 6 The LCD Monitor’s Control Panel 7 Adjusting the Monito ...

  • Sceptre Technologies X9G-NAGAV - page 5

    1 Rev.1 The LCD Monitor Your New LCD Monitor Your LCD Monitor has been desi gned to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x400 VGA to 1280x1024 SXGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters, and t he LCD M ...

  • Sceptre Technologies X9G-NAGAV - page 6

    2 Rev.1 After unpacking your LCD monitor, make sure the following items are included in the box and are in good condition: • LCD monitor • Power Cord • Monitor-T o-PC Analog signal cable 15pin • Monitor-T o-PC DVI signal cable • User ’s manual If you find that any item to be missing or appear to be damaged, contact your dealer immediate ...

  • Sceptre Technologies X9G-NAGAV - page 7

    3 Rev.1 Identifying Components A. The LCD Monitor — Front View Figure 1-1: The LCD Monitor Front View 1. Pow er-On Indicator This Circular LED indicator green lit when the power is on and orange lit when the LCD monitor is in power-saving mode. 2. Monitor Stand 3. LCD Screen The LCD monitor screen is a 19-inch TFT 1280 x 1024 screen. 4. LCD Monit ...

  • Sceptre Technologies X9G-NAGAV - page 8

    4 Rev.1 B. "Hot Keys" for Quick Adjustment of Monitor Settings Figure 1-2: "Hot Keys" 1. Brightness Adjustment "hot key": Press this + button to allow you to adjust the brightness of the LCD Monitor directly Brightness 50 2. Contrast Adjustment “ Hot key” Press this - button to allow you to adjust the contrast of t ...

  • Sceptre Technologies X9G-NAGAV - page 9

    5 Rev.1 Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 ° . 10 Figure 1-3: Tilting the Monitor 0 to 10 ...

  • Sceptre Technologies X9G-NAGAV - page 10

    6 Rev.1 Connecting AC Power and Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. DVI VGA AC-IN AC Outlet (Wall Socket) Computer Power Cord Figure 1-4: The AC Adapter Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in pow ...

  • Sceptre Technologies X9G-NAGAV - page 11

    7 Rev.1 The Display Controls The LCD Monitor’s Control Panel Figure 2-1: The Control Pane l 1. : Enable the OSD Menu button or / Move the cursor to the left (w hen OSD is enabled) 2. : Move the cursor to the Right ( When OSD is enabled) / Auto-adjustment hot key 3. - : Enter into the sub-menu or decrease the value / Contrast hot key 4. + : Enter ...

  • Sceptre Technologies X9G-NAGAV - page 12

    8 Rev.1 Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the Y button causes the screen below to appear. 2. Use the Y & Z key to select the desired group, then press – or + key to enter into sub-menu 3. Repeat step 2 to select the changed item, then – or + to change the value. Monitor Control OSD Main SCREEN Main Menu Sub Menu De ...

  • Sceptre Technologies X9G-NAGAV - page 13

    9 Rev.1 Monitor Adjustment Allow you to adjust the LCD monitor’s display settings. Press the Adjustment control button to display the submenu. Use the Function Select button to select one of the following submenu options: Auto Adjustment ( For VGA port only, DVI port can’t adjustment ) Press the Adjustment control button to let the monitor dete ...

  • Sceptre Technologies X9G-NAGAV - page 14

    10 Rev.1 text and graphic display modes. PORT-SELECT: To switch between analog and DVI port for PC signal input EXIT: To exits the Monitor-Control submenu OSD-control The OSD-Control menu lets you adjust the position of the OSD on the screen. Press the Adjustment control button to display the submenu. OSD-H-POSITION: To change the position of the O ...

  • Sceptre Technologies X9G-NAGAV - page 15

    11 Rev.1 GRAPHIC-CONTROL: The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor’s display. CONTRAST: To adjust the contrast level of the display screen BRIGHTNESS: To adjust the light level on the display screen. COLOR: To select the LCD monitor’s color display. The available opti ...

  • Sceptre Technologies X9G-NAGAV - page 16

    12 Rev.1 To reset the entire Graphic-Control submenu settings to the factory default. EXIT: To exit the Graphic-Control submenu. MISC-CONTROL: The Misc-Control menu option lets you select the OSD display language, adjust the audio volume setting and view system information. LANGUAGE: The supported languages include German, English, French, Spanish, ...

  • Sceptre Technologies X9G-NAGAV - page 17

    13 Rev.1 Note: 1) No video When the monitor is ON and there is no video signal received, the following message will be displayed 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 85HZ) the display will show the following message No video Over Range ...

  • Sceptre Technologies X9G-NAGAV - page 18

    14 Rev.1 Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 19" SXGA Control Functions Power Software Power switch with LED indicator (ON/OFF) Main Menu Submenu MONITOR- CONTROL Auto Adjustment, H-POSITION, V- POSITION, PHASE, CLOCK, GRAPHIC/TEXT, PORT-SELECT, RESET, EXIT OSD-CONTROL OSD-H-POSITION, OSD-V- POSITION, OSD-TIM ...

  • Sceptre Technologies X9G-NAGAV - page 19

    15 Rev.1 Item Specificaiton Scanning Frequency H/V, Hz 24-80K 50-75 P o w e r Management M e e t s VESA DPMS Power Consumption (ON/OFF, W) 34W/1W Max. Dimensions WxHxD 16.54 x 16.4 x 6.81 in. (420.2 x 416.5 x 173mm) Net Weight (approx.) 11 lbs (5 Kg) Power Supply Universal Input AC Socket Env ir onm en t Operating Temperature: 32 to 104°F (0 to 40 ...

  • Sceptre Technologies X9G-NAGAV - page 20

    16 Rev.1 Appendix B Supported Timing Item Standards Resolution Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) 1 NEC PC98 640x400 21.05 56.42 24.83 2 MAC 13" mode 640x480 30.24 66.67 35.00 3 MAC 16" mode 832x624 57.28 74.55 49.73 4 MAC 17" mode 1024x768 80.00 75.02 60.24 5 VGA 640x350 25.18 70.09 ...

  • Sceptre Technologies X9G-NAGAV - page 21

    17 Rev.1 Appendix C Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. Before applying any of the following troubleshooting procedures, you should first ...

  • Sceptre Technologies X9G-NAGAV - page 22

    18 Rev.1 Change to one of the alternate m odes listed in Appendix B, or replace the VGA card and repeat steps 1 and 2. 4. If the power LED is not lit, check that the AC power connector is securely connected, and verify that the AC adapter LED is lit. If the AC adapter LED is not lit, please contact your dealer for assistance. PROBLEM: The LCD displ ...

メーカー Sceptre Technologies カテゴリー Computer Monitor

Sceptre Technologies X9G-NAGAVのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- X9G-NAGAVの取扱説明書
- Sceptre Technologiesの製品カード
- パンフレット
- またはSceptre Technologies X9G-NAGAVの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sceptre Technologies X9G-NAGAVの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sceptre Technologies X9G-NAGAVの取り付け説明書、サービスマニュアル、簡易説明書、またはSceptre Technologies X9G-NAGAVのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sceptre Technologies X9G-NAGAVの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sceptre Technologies X9G-NAGAVデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSceptre Technologies X9G-NAGAVを使用するのを助ける技術的文書のことです。説明書は通常、全てのSceptre Technologies X9G-NAGAVユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sceptre Technologiesの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sceptre Technologies X9G-NAGAVの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSceptre Technologies X9G-NAGAVの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sceptre Technologies X9G-NAGAVに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sceptre Technologies X9G-NAGAVデバイスの基本機能を使うにあたってのヒント。 Sceptre Technologies X9G-NAGAVのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sceptre Technologies X9G-NAGAVに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSceptre Technologies X9G-NAGAVのメーカー/サービスへの連絡先に関する情報。

Sceptre Technologies X9G-NAGAVについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもSceptre Technologies X9G-NAGAVの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSceptre Technologies X9G-NAGAVで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)