-
Multiquip C30HDG - page 1
INST ALLA TION/OPERA TION MANUAL MIRA TRON WIRELESS REMOTE CONTROL RADIO MA YCO MODEL C30HDG THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. Re vision #0 (08/19/09) ...
-
Multiquip C30HDG - page 2
P A GE 2 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) T ABLE OF CONTENTS W arranty ............................. 3 Overview ............................ 4 Specifi cations .................... 5 Care And Handling ............. 6 Receiver Installation ......... 7-8 Cable Installation .............. 9 Wiring Diagram.................. ...
-
Multiquip C30HDG - page 3
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P A GE 3 LIMITED ONE YEAR W ARRANTY Miratron Incorporated, hearafter referred to as Mir atron, is providing this warranty in lieu of all other e xpress or implied warranties, including an y warranty of merchantability or fi tness for a particular pur pose. This warranty is buy er’ s e ...
-
Multiquip C30HDG - page 4
P A GE 4 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) OVER VIEW AL W A YS read manual bef ore attempting to operate the equipment. F ailure not to read manual could cause sev ere equipment damage and or damage to the receiver and transmitter . Make sure w ork area is safe to operate radio control receiv er and transmitter . This de ...
-
Multiquip C30HDG - page 5
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P AGE 5 SPECIFICA TIONS Specifi cations T able 1. Miratron Model Number: RX4 Radio Control Receiver CMD16-0135 ~ (MQ P/N EM98215) General: P ower Requirements 12-24VDC, 500mA max Radio: F requency Standard F requecy Control FCC ID Receiver Sensitivity 902-928 MHz, FHSS, ISM Band Direct ...
-
Multiquip C30HDG - page 6
P A GE 6 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) CARE AND HANDLING T ransmitter: Clean transmitter gently with a damp cloth. DO NO T immerse transmitter in water , or spra y with hose. DO NOT store outside . DO NO T drop transmitter or otherwise subject transmitter to ph ysical shock. DO NO T e xpose transmitter to ...
-
Multiquip C30HDG - page 7
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P AGE 7 RECEIVER INST ALLA TION P arts: Make sure all parts are accounted for bef ore perf or ming the installation. The f ollowing par ts are included with the kit: Radio T ransmitter Radio Receiver Spiral Antenna with associated mounting hardware Coaxial Antenna Cable D ...
-
Multiquip C30HDG - page 8
P A GE 8 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) Radio Control Receiver Mounting Drill two 1/4” holes into the control bo x suppor t panel on the C30HDG 1. as shown in Figure 1. After both holes hav e been dr illed, deb urr each hole opening. 2. Using a 1/4-20 x 1-1/4 bolt (2), 1/4 lock w asher (2), 1/4 fl at washer (2) 3. ...
-
Multiquip C30HDG - page 9
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P AGE 9 CABLE INST ALLA TION Control Bo x Removal Using a 7/16 sock et remov e the mounting bolts (3) that secure the control box 1. to the suppor t brac ket. Once the bolts hav e been remov ed, fl ip the panel downw ard to gain access to 2. the connection points. Data Cable Connections ...
-
Multiquip C30HDG - page 10
P A GE 10 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) Wiring Diagram Figure 2. DECREASE TERMINAL STRIP (+12VDC) BA TT + ADD TERMINAL RING BLACK WHITE PUMPING CONTROL SWITCH WHITE (ADD) BLACK (ADD) ENGINE OIL SENSOR EMERGENCY STOP PIN 4 (WHITE) SPLICE SPLICE REMOTE (WHITE) DECREASE (WHITE) INCREASE (WHITE) BA TT + (RED) FRAME GROUN ...
-
Multiquip C30HDG - page 11
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P AGE 11 TRANSMITTER/RECEIVER The defi nitions below describe the controls and functions of the Miratron T ransmitter and Radio Control Receiv er . T ransmitter P ower On Switch 1. — Place this s witch in the ON position to tur n on the transmitter . Be sure to place this switch in th ...
-
Multiquip C30HDG - page 12
P A GE 12 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) TRANSMITTER/RECEIVER Functional T est P erform the functional test procedure below to test the remote control radio system.. Star t the engine as outlined on the operator’ s manual. 1. Place the transmitter pow er ON/OFF switch in the ON position. 2. Place the pumping control ...
-
Multiquip C30HDG - page 13
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P AGE 13 TROUBLESHOOTING T roubleshooting T able 2. Symptom P ossible Pr oblem Solution T ransmitter does not function at all LED status indicator not fl ashing. LED indicator not lit when power ON/OFF s witch is pressed. T ur n transmitter pow er switch ON. Weak dead battery , replace ...
-
Multiquip C30HDG - page 14
P A GE 14 — INST ALLA TION OPERA TION MANU AL — REV . #0 (08/19/09) SYSTEM WIRING DIAGRAM System Wiring Diagram Figure 4. ...
-
Multiquip C30HDG - page 15
INST ALLA TION/OPERA TION MANU AL — REV . #0 (08/19/09) — P AGE 15 NOTE P AGE ...
-
Multiquip C30HDG - page 16
INST ALLA TION/OPERA TION MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC. Multiquip Inc, the MQ logo and the Mayco logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other ...
Multiquip C30HDGについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもMultiquip C30HDGの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMultiquip C30HDGで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。