Cobra Electronics ESD-9570の取扱説明書

21ページ 1.46 mb
ダウンロード

ページに移動 of 21

Summary
  • Cobra Electronics ESD-9570 - page 1

    Operating Instructions for Y our Cobra ® 11 Band ™ Extra Sensory Detection ® RADAR/LASER DETECTOR MODEL ESD – 9570 Nothing comes close to a Cobra ® N ...

  • Cobra Electronics ESD-9570 - page 2

    Important Information Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra radar detector . The Communications Act of 1 924 guarantees your right to receive radio transmissions on any frequency . Local laws that contravene this Act, while illegal, may be enforced by your loca ...

  • Cobra Electronics ESD-9570 - page 3

    NW Bright c s System Ready windshield bracket mount slot ON-OFF/VOLUME control 12V DC POWER JACK NW Bright c s PROGRAM/MUTE button to manually mute audio alerts (and to enter programming mode). SET /CITY button for CITY or HIGHW A Y modes for fewer false alerts (and to change user mode settings while programming). SPEAKER AUXILIAR Y AUDIO JACK LASE ...

  • Cobra Electronics ESD-9570 - page 4

    T able of Contents Important information about... Federal Laws, Safety Alert/Strobe Alert, Safe Driving, Security of Y our Vehicle, Customer Support .......................................................................... A1 IInstallation ............................................................................................................. ...

  • Cobra Electronics ESD-9570 - page 5

    Where to Mount Y our Unit Y ou will get optimum performance from your detector if you mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear . Y ou can also mount it directly on the dashboard. The unit's lenses m ...

  • Cobra Electronics ESD-9570 - page 6

    Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear , level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook-and-loop fastener . 3. Attach the pad to the dashboard at your chosen location and remove the other paper backing. 4. At ...

  • Cobra Electronics ESD-9570 - page 7

    7 3 OPERA TION• EASYSET PROGRAMMING 6 3 OPERA TION• EASYSET PROGRAMMING EasySet Programming All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind: • Buttons can have multiple functions. • All settings will be stored in memory when the power is turned off and recalled wh ...

  • Cobra Electronics ESD-9570 - page 8

    9 3 OPERA TION• SETTINGS Highway/City Mode Y our detector has a Highway mode and three different levels of City modes: City X, City X Beep Off and City X+K. City X mode sounds a single beep when the signal is first detected. City X Beep Off mode prevents all X band audio alerts until the signal strength reaches level 3. City X+K mode combines the ...

  • Cobra Electronics ESD-9570 - page 9

    11 3 OPERA TION• SETTINGS 10 3 OPERA TION• SETTINGS IntelliMute works with all City and Auto Mute modes. Whenever engine revs are below the activation point, an arrow pointing down will appear in the display . Above the activation point, an arrow pointing up will appear . If, for any reason, the unit stops sensing your engine’ s revs, Intelli ...

  • Cobra Electronics ESD-9570 - page 10

    Intelli Mute Off Intelli Mute Set! 13 3 OPERA TION• SETTINGS 12 3 OPERA TION• SETTINGS Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after 4 seconds for as long as the signal is detected. When you turn Auto Mute mode on or off you will hear 2 beeps for Auto Mute on and 1 beep for Auto Mute off. (See page 7 fo ...

  • Cobra Electronics ESD-9570 - page 11

    15 3 OPERA TION• SETTINGS 14 3 OPERA TION• SETTINGS NOTE: If you do not press the SET/CITY button within 2 minutes, compass calibration will automatically terminate 1 beep Compass not set... Please try again... for 2 seconds Compass NW h Compass not 1. Procedure In Program mode, go to Set Compass. Press and hold the SET/CITY button to begin set ...

  • Cobra Electronics ESD-9570 - page 12

    17 3 OPERA TION• SETTINGS 16 3 OPERA TION• SETTINGS Pop Alert Pop Alert will alert you of Ka band Pop signals. During the alert, the unit continues to detect other signals. When you turn Pop Ka Detect mode on or off you will hear 2 beeps for Pop detection on or 1 beep for Pop detection off. (See page 7 for instructions on using the Program mode ...

  • Cobra Electronics ESD-9570 - page 13

    19 4 DETECTION 18 3 OPERA TION• SETTINGS Audio Alerts A distinctly different alert tone is used for each type of signal detected (including separate tones for each laser signal). For X, K and Ka band radar signals, the tones will repeat faster as you approach the signal source. The repeat rate of the tones gives you useful information about the s ...

  • Cobra Electronics ESD-9570 - page 14

    21 4 DETECTION 20 4 DETECTION PLEASE NOTE : There are different tones for each Safety Aler t VG-2 Alert * Ty pe of Signal Interceptor VG-2 V Visual Display VG2 Safety Alert * Emergency V Road Hazard Train VG2 * your detector provides LaserEye 360° detection of these signals Ty pe of Signal emergency vehicles road hazards trains Visual Display Emer ...

  • Cobra Electronics ESD-9570 - page 15

    23 5 UNDERST ANDING RADAR & LASER 22 4 DETECTION Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.525 GHz K band 24.150 GHz Ka band 33.400-36.00 GHz Y our detector detects signals in all three radar bands. VG -2 and Spec ...

  • Cobra Electronics ESD-9570 - page 16

    25 5 UNDERST ANDING RADAR & LASER 24 5 UNDERST ANDING RADAR & LASER Does weather have any affect on LIDAR? Y es. Rain, snow, smoke, fog, or airborne dust particles will reduce the effective range of LIDAR and can, if dense enough, prevent its operation. Can LIDAR operate through glass? Y es. Newer LIDAR guns can obtain readings through most ...

  • Cobra Electronics ESD-9570 - page 17

    6 MAINTENANCE & CUSTOMER SERVICE 6 PRODUCT SERVICE 27 26 If you are asked to send your unit to the Cobra factory , please follow these steps: 1. Send the complete unit, including power cord. (It is not necessary to include the mounting bracket.) 2. For warranty repair , enclose some form of proof-of-purchase, such as a photocopy or carbon copy ...

  • Cobra Electronics ESD-9570 - page 18

    29 7 W ARRANTY 28 COBRA ELECTRONICS CORPORA TION warrants that its Cobra 11 Band Ultra Radar/ Laser Detectors and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser , provided that the pro ...

  • Cobra Electronics ESD-9570 - page 19

    NOTES NOTES ...

  • Cobra Electronics ESD-9570 - page 20

    33 10 ORDER FORM For credit card orders fill out order form and fax to: 773.622.2269 or call 773.889.3087 (Press 1 from the main menu) 8:00 am - 6:00 pm, M-F , CST . Make check or money order payable to: Cobra Electronics 6500 W est Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept. To order online, please visit our website at: www .cobr ...

  • Cobra Electronics ESD-9570 - page 21

    Printed in Korea Part No. 480-063-P ©2003 Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 USA The Cobra ® line of quality products includes: CB radios microT ALK ® radios Radar/Laser Detectors GPS Safety Alert ® T raffic W arning Systems Accessories HighGear ™ Accessories For more information or to order any of our p ...

メーカー Cobra Electronics カテゴリー Radar Detector

Cobra Electronics ESD-9570のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ESD-9570の取扱説明書
- Cobra Electronicsの製品カード
- パンフレット
- またはCobra Electronics ESD-9570の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cobra Electronics ESD-9570の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cobra Electronics ESD-9570の取り付け説明書、サービスマニュアル、簡易説明書、またはCobra Electronics ESD-9570のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cobra Electronics ESD-9570の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cobra Electronics ESD-9570デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCobra Electronics ESD-9570を使用するのを助ける技術的文書のことです。説明書は通常、全てのCobra Electronics ESD-9570ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cobra Electronicsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cobra Electronics ESD-9570の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCobra Electronics ESD-9570の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cobra Electronics ESD-9570に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cobra Electronics ESD-9570デバイスの基本機能を使うにあたってのヒント。 Cobra Electronics ESD-9570のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cobra Electronics ESD-9570に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCobra Electronics ESD-9570のメーカー/サービスへの連絡先に関する情報。

Cobra Electronics ESD-9570についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCobra Electronics ESD-9570の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCobra Electronics ESD-9570で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)